Network Integrated Amplifier OWNER’S MANUAL
Contents Connections Playback Rear panel Remote control unit Tips Appendix Connections 6 7 7 8 8 11 14 Accessories Inserting the batteries Operating range of the remote control unit Part names and functions Front panel Rear panel Remote control unit Front panel Settings Connecting speakers Connecting the speaker cables Connecting the subwoofer Connecting speakers Connecting a playback device Connecting a recording device Connecting to a device with digital audio connectors Connecting a USB flash
Contents Connections Playback Settings Playback Basic operation Turning the power on Switching the power to standby Selecting the input source Adjusting the volume Turning off the sound temporarily (Muting) Playing CDs Listening to music on a Bluetooth device Listening to music on a Bluetooth device Pairing with other Bluetooth devices Reconnecting to this unit from a Bluetooth device Playing digital input Getting the HEOS App Setting up the HEOS App for the first time with a HEOS built-in device Adding
Contents Connections Playback Settings Settings Appendix Tips Menu map Menu operation Audio Digital Filter Lock Range Volume Limit Low Pass Filter TV TV Input Auto-Play HDMI Power Off Control General Lighting Auto-Standby Reset Network Network & USB-A Wi-Fi Bluetooth Network Control Sharing and connecting to the Wi-Fi setting of an iOS device Connecting by using the WPS button on the router Front panel Tips Rear panel Remote control unit 63 65 66 66 66 67 67 68 68 68 68 69 69 69 70 71 71 71 71 7
Contents Connections Playback Settings Appendix 96 97 98 99 100 100 101 102 106 107 112 Playing back a USB flash drives D/A converter Playing back a Bluetooth device Playing back files stored on a PC and NAS Playing back Internet Radio Last function memory About HDMI Explanation of terms Trademark information Specifications Index Front panel Rear panel Remote control unit 5 Index Tips Appendix
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Contents Connections Playback Settings Inserting the batteries 1 Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel q w e u i r o Q0 Q1 For details, see the next page.
Contents q w Connections er t Playback Settings Tips Appendix D Remote control sensor This receives signals from the remote control unit. (v p. 7) w y E Protection circuit indicator This blinks when the protection circuit has operated. (v p. 105) F Headphones jack Used to connect headphones. When the headphones are plugged into this jack, audio will no longer be output from the connected speakers and from the PRE OUT connectors.
Contents Connections Playback Settings Tips Appendix I BASS control knob This setting adjusts the volume level for the bass. (v p. 60) J TREBLE control knob This setting adjusts the volume level for the treble. (v p. 60) K BALANCE control knob This adjusts the balance of the volume output from the left and right speakers. (v p. 60) u i o Q0 Q1 L VOLUME knob Adjusts the volume. (v p. 35) Q2 G INPUT selector knob This switches input sources. (v p.
Contents Connections Playback Settings Tips Appendix Rear panel q w e r t y u q AC IN Bluetooth / Wi-Fi ANTENNA 5V/1A COAXIAL NETWORK HDMI ARC PHONO Bluetooth / Wi-Fi ANTENNA OPTICAL SPEAKERS DIGITAL AUDIO IN SIGNAL GND AUDIO IN CD LINE RECORDER RECORDER SUBWOOFER IN OUT AUDIO IN i AUDIO OUT PRE OUT o Q0 POWER AMP IN REMOTE CONTROL Q1 Q2 Q3 For details, see the next page.
Contents Connections q w ert y Playback u 5V/1A COAXIAL NETWORK PHONO HDMI ARC SPEAKERS SIGNAL GND AUDIO IN CD LINE RECORDER RECORDER SUBWOOFER IN D SIGNAL GND terminal Used to connect a ground wire for the turntable. (v p. 23) OUT AUDIO IN AUDIO OUT PRE OUT POWER AMP IN REMOTE CONTROL E HDMI connector (HDMI ARC) Used to connect an ARC function-compatible TV. (v p.
Contents Connections Playback AC IN Bluetooth / Wi-Fi ANTENNA 5V/1A COAXIAL NETWORK PHONO HDMI ARC Settings Bluetooth / Wi-Fi ANTENNA SPEAKERS SIGNAL GND L REMOTE CONTROL connectors Used to connect to a Marantz audio device that is compatible with the remote control function. (v p. 31) AUDIO IN CD LINE RECORDER RECORDER SUBWOOFER IN OUT AUDIO IN AUDIO OUT PRE OUT POWER AMP IN REMOTE CONTROL i oQ0Q1 Q2 M AC inlet (AC IN) Used to connect the power cord. (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit The remote control provided with this unit can control a Marantz CD player. 0 “CD player operations” (v p. 17) q o Operating this unit To operate this unit, press REMOTE MODE AMP button to switch the remote control operating mode to this unit. w A Remote control signal transmitter This transmits signals from the remote control unit. (v p. 7) e B Input source select buttons These select the input source. (v p.
Contents Connections Playback Settings Tips Appendix D CONNECT button Used for Wi-Fi setup. (v p. 74) E Input source select button (INPUT) This switches input sources. (v p. 35) o Q0 F ENTER button This determines the selection. G Cursor buttons These select items. H BACK button Returns to the previous item. r t I Power operation button (AMP X) This turns the power on/off (standby). (v p.
Contents Connections Playback Settings Tips Appendix L OPTION button This displays the option menu on the display. 0 An option menu is not displayed for some input sources. M MUTE button (:) This mutes the output audio. (v p. 35) N SETUP button The setting menu is displayed on the display. (v p. 65) O SLEEP button This sets the sleep timer. (v p. 61) P DIMMER button Adjust the display brightness of this unit. (v p.
Contents Connections Playback Settings Tips Appendix o CD player operations A Marantz CD player can be operated. To operate CD player, press REMOTE MODE CD button to switch the remote control to the CD player operation mode.
Contents Connections Playback Settings Tips L OPTION (MODE) button M SETUP button N CLEAR button O DIMMER button 0 The remote control may not operate some products.
Contents Connections Playback Settings Appendix o Cables used for connections o Contents Connecting speakers 20 Connecting a playback device 23 Connecting a recording device 24 Connecting to a device with digital audio connectors 25 Connecting a USB flash drive to the USB port 27 Connecting to a home network (LAN) 28 Connecting a pre-amplifier 30 Connecting devices with remote control connectors 31 Connecting the power cord 32 Provide necessary cables according to the devices you wan
Contents Connections Playback Settings Tips Appendix Connecting speakers Connecting the speaker cables NOTE Carefully check the left (L) and right (R) channels and + (red) and - (white) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer.
Contents 4 Connections Playback Settings Tips Appendix Connecting the subwoofer Turn the speaker terminal clockwise to tighten it. Use a subwoofer cable to connect the subwoofer. RECORDER SUBWOOFER Spade lug connector AUDIO OUT Subwoofer When using a banana plug Tighten the speaker terminal firmly before inserting the banana plug.
Contents Connections Playback Settings Connecting speakers SPEAKERS w q (R) Front panel Rear panel w q (L) Remote control unit 22 Index Tips Appendix
Contents Connections Playback Settings Tips Appendix Connecting a playback device You can connect turntables, tuners and CD players to this unit. This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect this unit to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
Contents Connections Playback Settings Tips Appendix Connecting a recording device Recording device AUDIO OUT R AUDIO IN L R L R L R L R L R L AC IN Bluetooth / Wi-Fi ANTENNA 5V/1A COAXIAL NETWORK PHONO HDMI ARC Bluetooth / Wi-Fi ANTENNA OPTICAL DIGITAL AUDIO IN SPEAKERS SIGNAL GND AUDIO IN CD LINE RECORDER RECORDER SUBWOOFER IN OUT AUDIO IN AUDIO OUT PRE OUT POWER AMP IN REMOTE CONTROL NOTE 0 Never insert the short-circuiting pin plug into the analog audio output conn
Contents Connections Playback Settings Tips Appendix Connecting to a device with digital audio connectors Use this connection to input digital audio signals to this unit, and convert the signals for playback using the D/A converter of this unit. (v p. 40) Satellite receiver etc.
Contents Connections Playback Settings Tips Appendix 0 When connecting a TV to this unit, turn off the audio output of the TV’s internal speakers. See the owner’s manual of your TV for details. 0 When connecting the HDMI ARC terminal of this device to your TV, connect it to the HDMI input terminal of your TV that supports the ARC function.
Contents Connections Playback Settings Tips Appendix Connecting a USB flash drive to the USB port For operating instructions see “Playing music from a USB flash drive” (v p. 54).
Contents Connections Playback Settings Tips Appendix Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below.
Contents Connections Playback Settings Wireless LAN 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN. 0 Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. 0 Only use a shielded STP or ScTP LAN cable (readily available at electronics stores). (CAT-5 or greater recommended) 0 The normal shielded-type LAN cable is recommended.
Contents Connections Playback Settings Connecting a pre-amplifier Connect a pre-amplifier to the unit to use it as a power amplifier.
Contents Connections Playback Settings Tips Appendix Connecting devices with remote control connectors Performing operations by RC on this unit without visual contact Remotely connecting Marantz audio devices You can connect an external IR receiver to the REMOTE CONTROL connectors to perform operations on this unit with the supplied remote control unit without visual contact.
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet.
Contents Connections Playback Settings Tips Appendix o Contents Playback a device Basic operation Turning the power on 34 Switching the power to standby 34 Selecting the input source 35 Adjusting the volume 35 Turning off the sound temporarily (Muting) 35 42 Listening to Internet Radio 53 Playing music stored on your mobile 53 Playing back files stored on PC or NAS 54 Playing music from a USB flash drive 54 AirPlay function 56 Spotify Connect function 59 Front panel Rear pane
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on AMP X 1 Input source select buttons Press AMP X to turn on. 0 You can also press X on the main unit to turn on power from standby mode. 0 You can also press p to turn on power from standby mode. INPUT Switching the power to standby VOLUME 1 Press AMP X. The unit switches to standby mode. 0 You can also switch the power to standby by pressing X on the main unit.
Contents Connections Playback Settings Selecting the input source 1 Tips Appendix Adjusting the volume 1 Press the input source select button to be played back. The selected input source appears on the display. 0 You can also press INPUT to select the input source. 0 You can also select the input source by turning INPUT selector on the main unit. 0 If you press the NETWORK button, the input source is switched to the one that was previously played on the network.
Contents Connections Playback Settings Tips Appendix Playing CDs 1 CD 2 3 Prepare for playback. Check the connection, then turn on this units. (“Connecting a playback device” (v p. 23)) Press AMP X to turn the power on. Press the input source select button (CD) to switch the input source to “CD”. “CD” is displayed on the display. 4 5 VOLUME Front panel Rear panel Remote control unit 36 Playback the CD. Use VOLUME no to adjust the volume.
Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Communication is possible up to a range of about 98.4 ft/30 m. AMP X Bluetooth NOTE 0 To play back music from a Bluetooth device, the Bluetooth device needs to support the A2DP profile.
Contents Connections Playback Settings 4 Listening to music on a Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 2 3 5 A Connect the supplied external antennas for Bluetooth/wireless connectivity to the Bluetooth/wireless LAN antenna connectors on the rear panel. (v p. 12) B Press AMP X to turn on power to the unit.
Contents Connections Playback Settings Pairing with other Bluetooth devices 2 After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. This operation also needs to be performed when switching the Bluetooth device for playback. Activate the Bluetooth settings on your Bluetooth device. Press and hold Bluetooth on the remote control unit for at least 3 seconds. 1 This unit will go into the pairing mode.
Contents Connections Playback Settings Tips Appendix Playing digital input 1 2 OPTICAL COAXIAL HDMI ARC 3 Prepare for playback. Check the connection, then turn on this units. (“Connecting to a device with digital audio connectors” (v p. 25)) Press HDMI ARC, COAXIAL or OPTICAL to switch the input source to “HDMI ARC”, “COAXIAL” or “OPTICAL”. Play the component connected to this unit. 0 If the sampling frequency cannot be detected, “Unlocked” will be displayed.
Contents Connections Playback Settings 0 When “TV Input” is set in the menu, this unit automatically turns on when the TV connected to the unit is turned on, and the input source switches to “HDMI ARC”, “COAXIAL” or “OPTICAL”. (v p. 68) 0 If you connect your TV via the Optical or Coaxial connection, this unit cannot be put to standby when you turn off your TV. If you want to automatically put this device on standby, set “Auto-Standby” in the settings menu. (v p.
Contents Connections Playback Settings Tips Appendix Getting the HEOS App You can use many online music streaming services from the HEOS App. Depending upon your geographical location, there are several options to choose from. Download the HEOS App for iOS or Android by searching App Store, Google Play store or Amazon Appstore for “HEOS”. 0 Specifications of the HEOS App may be changed without prior notice for improvement purposes.
Contents Connections Playback Settings 1 Setting up the HEOS App for the first time with a HEOS built-in device Once you have placed this unit in your listening room and have downloaded the HEOS App, you are ready to configure this unit for music playback. This involves following a few simple steps to get this unit connected to your existing home network: Remote control unit Make sure your mobile device is connected to your wireless network (the network you want to connect to this device).
Contents Connections Playback Settings Tips o Adding wireless HEOS built-in devices Adding the registration of HEOS builtin devices in the HEOS App You can add additional wireless HEOS built-in devices to your HEOS system by selecting “Add Device” from the HEOS App’s settings menu and follow the instructions: The HEOS system is a true multiroom audio system that automatically synchronizes audio playback between multiple HEOS built-in devices so that the audio coming from different rooms is perfectly
Contents Connections Playback Settings Appendix o Changing your HEOS Account HEOS Account 1 2 HEOS Accounts can be registered in “HEOS Account” (v p. 45) in the in the menu of this unit or by tapping “Music” tab - “Settings” icon HEOS App. o What is a HEOS Account? 3 4 A HEOS Account is master account or “keychain” for managing all of your HEOS music services with one single username and password. o Why do I need a HEOS Account? Tap the “Music” tab. Select the Settings icon the screen.
Contents Connections Playback Settings Tips Playing from streaming music services Appendix Rooms Drag one room into another to group them A music service is an online music company that provides access to vast music collections via free and/or paid subscriptions. Depending upon your geographical location, there are several options to choose from.
Contents Connections Playback Settings Tips o Selecting the music track or station from music sources 1 Appendix Music Tap the “Music” tab and select a music source. 0 All music services displayed may not be available in your location.
Contents 2 Connections Playback Settings Tips Browse the music to play. Album After selecting a music track or radio station the app will automatically change to the “Now Playing” screen. Now Playing Artist Album 10 Tracks,60 Mins.,2014 0:20 1 Track 1 0 When you select a music track to play you will be asked how you want to queue up your music. 2 Track 2 Play Now & Replace Queue: Clears the queue and plays the selected item immediately.
Contents Connections Playback Settings Listening to the same music in multiple rooms Tips Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining Song Name 1 The HEOS system is a true multi-room audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 HEOS devices to your HEOS syst
Contents Connections Playback Settings Tips o Ungrouping rooms 1 2 Press and hold your finger on room that you want to remove from the group. Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining Song Name 1 Song Name 1 Living Drag it out of the group and lift your finger. Living Song Name 2 Song Name 2 Kitchen Living NOTE 0 You can not remove the first room that started playing the music before grouping.
Contents Connections Playback Settings o Grouping all rooms (party mode) Rooms You can easily group 16 rooms together into Party Mode by using a “pinch” gesture. 1 2 3 Tips Drag one room into another to group them 1 Appendix Rooms Drag one room into another to group them Dining Place two fingers on the screen over the list of rooms. 3 Dining+Living+... Song Name 1 Song Name 1 Dining Living Song Name 2 Quickly pinch your two fingers together and release.
Contents Connections Playback Settings o Ungrouping all rooms 2 3 Appendix Rooms You can easily ungroup all of your rooms and exit Party Mode by using a “spread” gesture. 1 Tips Rooms Drag one room into another to group them Dining Song Name 1 Place two fingers close together on the screen over list of rooms. 1 Drag one room into another to group them Dining Song Name 1 Dining Living Song Name 2 2 Quickly spread your two fingers apart from each other and release.
Contents Connections Playback Settings Perform this operation on the HEOS App. Download the HEOS App in advance to your iOS or Android device. (v p. 42) The HEOS system includes access to more than 100,000 free internet radio streams from all corners of the globe via the TuneIn radio service. Just select the TuneIn logo from the main “Music” menu and browse among the 100,000 stations neatly organized into popular categories and select a station that appeals to your mood.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC or NAS Playing music from a USB flash drive Perform this operation on the HEOS App. Download the HEOS App in advance to your iOS or Android device. (v p. 42) Perform this operation on the HEOS App. Download the HEOS App in advance to your iOS or Android device. (v p. 42) 1 2 1 3 Select “Music Servers” from the “Music” tab. Select the name of your networked PC or NAS (Network Attached Storage) server.
Contents Connections Playback Settings 0 It may take several minutes for the name of this unit to appear in the “USB Music” list if you have a large number of files on your USB flash drive. 0 It is not possible to connect and use a computer via the USB port of this unit using a USB cable. 0 For the types and specifications of audio formats that can be played back on this unit,see “Playing back a USB flash drives” (v p. 96).
Contents Connections Playback Settings Tips Appendix AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. 0 0 0 0 PC Input source will be switched to “AirPlay” when AirPlay playback is started. You can stop AirPlay playback by choosing other input source. For information about how to use iTunes, also see the Help for iTunes. The screen may differ depending on the OS and software versions.
Contents Connections Playback Settings Playing songs from your iPhone, iPod touch or iPad 1 2 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit. Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. Start iTunes and click the AirPlay icon to select this unit. 0 For details, see your device’s manual. 2 3 Appendix Playing iTunes music with this unit If you update your “iPhone/iPod touch/iPad” to iOS 10.0.
Contents Connections Playback Settings 2 Play a song from your iPhone, iPod touch or iPad on multiple synced devices (AirPlay 2) Appendix Tap the AirPlay icon. Displays a list of devices/speakers that can be played back on the same network. 0 A circle is displayed to the right of AirPlay 2 compatible devices. Songs from an iPhone, iPod touch or iPad operating iOS 11.4 or later can be synced with multiple AirPlay 2 supported devices for simultaneous playback.
Contents Connections Playback Settings Tips Appendix Spotify Connect function Spotify is all the music you’ll ever need. Millions of songs available instantly. Just search for the music you love, or let Spotify play you something great. Spotify works on your phone, tablet, computer and home speakers. So you’ll always have the perfect soundtrack for whatever you’re doing. Now you can enjoy Spotify with your free account as well as Premium account.
Contents Connections Playback Settings Tips Appendix Convenience functions Adjusting the tone and balance AMP X 1 2 Turn the SOURCE DIRECT knob of the main body and set it to “SOURCE DIRECT OFF”. Turn the BASS, TREBLE and BALANCE on the main unit to adjust the tone and balance. Playback in source direct mode The signal does not pass through the tone adjustment circuitry (BASS, TREBLE and BALANCE), resulting in playback of a higher sound quality.
Contents Connections Playback Settings Switching the display’s brightness Appendix Using the sleep timer The display brightness can be adjusted between four levels. Switching the display off reduces a source of noise that affects sound quality, enabling higher sound quality playback. 1 Tips You can have the power automatically switched to standby once a set time has elapsed. This is convenient for listening while going to sleep. 1 Press DIMMER.
Contents Connections Playback Settings Recording When connecting a pre-amplifier and using this unit as a power amplifier, switch the input source of this unit to “PWR AMP”. 1 Press AMP X to turn on. Press the input source select button to switch to the input source from which you want to record. 0 When the input source is “PWR AMP”, adjustment of the volume, balance and tone has no effect. Adjust these adjustments on the pre-amplifier. Recording starts.
Contents Connections Playback Settings Tips Appendix Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. Setting items Audio TV General Front panel Detailed items Description Page Digital Filter This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality.
Contents Connections Setting items Network Front panel Playback Settings Detailed items Tips Appendix Description Page Network & USB-A The network and USB memory playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. 71 Wi-Fi The Wi-Fi function can be stopped to prevent noise that affects the sound quality. 71 Bluetooth Stopping Bluetooth function reduces a source of noise that affects sound quality, enabling higher sound quality playback.
Contents Connections Playback Settings Tips Appendix Menu operation 1 2 3 4 Use Cursor Up/Down buttons to select the menu to be set or operated, then press ENTER. Use Cursor Up/Down buttons to change to desired setting. Press ENTER to enter the setting. 0 To return to the previous item, press BACK. 0 Exiting the Menu, press SETUP while the menu is displayed. The Cursor Up/Down ENTER display returns to the normal display. SETUP BACK Front panel Press SETUP.
Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. Digital Filter Lock Range This unit is equipped with a sound quality adjusting function which allows users to enjoy the desired playback sound quality. The unit supports PCM signal. Filter 1 (Default): Offers a short impulse response for both pre-echo and post-echo. Large amount of audio information clearly reproduces deep stereo imaging and the relative position of the sound source.
Contents Connections Playback Settings Volume Limit Sets the low pass filter for the subwoofer output. Set this according to your speakers and subwoofer. The output audio signal has a lower frequency than the set value. Do not set a maximum volume. (100) 40 Hz / 60 Hz / 80 Hz / 100 Hz / 120 Hz (Default: 80 Hz) 95 / 90 / 85 / 80 Front panel Appendix Low Pass Filter Make a setting for maximum volume. The volume cannot be increased above this setting.
Contents Connections Playback Settings Tips Appendix TV TV Input HDMI Power Off Control Set the input source to be used when playing audio from the TV through this unit. Set this according to the jack on this unit being used to connect to the TV. Set the “HDMI Power Off Control” function that is keyed to the power off operation of your HDMI connected TV to turn the device's power to standby.
Contents Connections Playback Settings Tips Appendix General Lighting Auto-Standby The brightness of the lighting LED can be adjusted between 4 levels. The brightness can also be synchronized to the brightness of the display. Switching the display off reduces a source of noise that affects sound quality, enabling higher sound quality playback. Sync (Default): Sets the amount of time that must elapse without unit operation or an input signal before the unit goes into standby automatically.
Contents Connections Playback Settings Reset Perform this procedure if the display is abnormal or if operations cannot be performed. Restores the contents of each setting to the factory settings. Make settings again. Cancel: Unit is not initialized. OK: Unit is initialized.
Contents Connections Playback Settings Tips Appendix Network Network & USB-A Wi-Fi The network and USB playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. This enables playback with a high sound quality when using the CD playback and D/A converter functions. On (Default) : Enables the network and USB memory playback (USB-A) function. Off: Disables the network and USB memory playback (USB-A) function.
Contents Connections Playback Settings Network Control Enables network communication in standby power mode. On (Default): Network is on during standby. Main unit operable with a network compatible controller. Off: Suspend network function during standby. 0 When using the HEOS App, use with the “Network Control” setting set to “On”. NOTE 0 When “Network Control” is set to “On”, the unit consumes more standby power.
Contents Connections Playback Settings Tips Appendix Sharing and connecting to the Wi-Fi setting of an iOS device This unit supports the “WAC (Wireless Accessory Configuration)” setup mode of Apple Inc. In the WAC setup mode, use your iOS device (iPhone/ iPod/iPad) to connect to the network. By connecting your iOS device with this device, this device can be automatically connected to the same network. 1 2 3 4 5 Press OPTION. Select a network to connect this device and press “Next”.
Contents Connections Playback Settings Connecting by using the WPS button on the router If you are using a wireless router that supports WPS (Wi-Fi Protected Setup™), connect to the network with the "push button method". (Wi-Fi Protected Setup™ is trademarks of Wi-Fi Alliance.) 1 2 Press the WPS button on your router. Within 2 minutes, press and hold the CONNECT button on the remote control for 5 seconds. “WPS Connecting” is shown on the display and the connection is started.
Contents Connections Playback Settings o Contents Appendix Troubleshooting Tips I want to listen to high sound performance playback 76 I want to play TV audio at higher quality 76 I want to adjust the tone myself 76 I want sound playback that is faithful to the original sound 76 I want to switch the filter to change the desired sound quality 77 I want to turn the display off 77 I want to turn the lighting LED off 77 Simple operations in the power off state 77 I want the volume not to
Contents Connections Playback Settings Tips Appendix Tips I want to listen to high sound performance playback 0 The network and USB memory playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. Set “Network & USB-A” to “Off” in the menu. (v p. 71) 0 The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Off” to the “Wi-Fi”. (v p.
Contents Connections Playback Settings Tips Appendix I want to switch the filter to change the desired sound quality 0 Switch the filter characteristics. (v p. 66) I want to turn the display off 0 Press the DIMMER button to turn the display off. (v p. 61) I want to turn the lighting LED off 0 Change the “Lighting” setting to “Off”. (v p.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? 0 If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem. Continue pressing the X button on the unit until “Restart” appears in the display, or remove and re-insert the power cord of the unit.
Contents Connections Playback Settings Tips Appendix Power does not turn on / Power is turned off Power is not turned on. 0 Check whether the power plug is correctly inserted into the power outlet. (v p. 32) 0 This unit is in standby mode. Press the X button on the unit or the AMP X button on the remote control. (v p. 34) 0 When the input source is set to “PWR AMP” and this unit is switched to standby mode, the “Auto-Play” function of this unit is disabled during standby.
Contents Connections Playback Settings Tips Appendix The power turns off and the protection circuit indicator shows one long blink and four short blinks in orange. 0 The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off, wait about an hour until this unit cools down sufficiently, and then turn the power on again. 0 Please re-install this unit in a place having good ventilation. 0 Check the speaker connections.
Contents Connections Playback Settings Tips Appendix Operations cannot be performed through the remote control unit Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. (v p. 7) 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 7) 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. 0 Check the connections for all devices. (v p. 19) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 20) 0 Securely tighten the speaker terminals.
Contents Connections Playback Settings Tips Appendix Sound is interrupted or noise occurs During playback from the Internet radio or USB flash drive, sound is occasionally interrupted. 0 When the transfer speed of the USB flash drive is slow, sound may occasionally be interrupted. 0 The network communication speed is slow or the radio station is busy. When making a call on mobile phone, noise occurs in audio output on this unit. 0 When making a call, keep a distance of 0.
Contents Connections Playback Settings Tips Appendix Sound is interrupted or noise occurs. 0 The “Lock Range” setting in the menu is too narrow. Broaden the “Lock Range” setting while listening to music until the music sounds normal. (v p. 66) When playing a record, the sound is distorted. 0 Adjust to a proper needle pressure. 0 Check the tip of the needle. 0 Replace the cartridge. When playing a record, a humming noise comes out of the speakers. 0 Check that the turntable is connected correctly.
Contents Connections Playback Settings Desired sound does not come out The volume does not increase. 0 The maximum volume is set too low. Set the maximum volume using “Volume Limit” on the menu. (v p. 67) Left/right volume balance is unbalanced. 0 Adjust the BALANCE control knob. (v p. 60) No sound is produced from subwoofer. 0 Check the subwoofer connections. (v p. 21) 0 Turn on the subwoofer’s power. The settings of the BASS, TREBLE and BALANCE knobs are not applied.
Contents Connections Playback Settings Tips Appendix AirPlay cannot be played back The AirPlay icon is not displayed on iTunes / iPhone / iPod touch / iPad. 0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to the same LAN as this unit. (v p. 28) 0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to the latest version. 0 Set “Network & USB-A” in the menu to “On”.
Contents Connections Playback Settings Tips Appendix USB flash drives cannot be played back USB flash drive is not recognized. 0 Disconnect and reconnect the USB flash drive. (v p. 27) 0 Mass storage class compatible USB flash drives are supported. 0 This unit does not support a connection through a USB hub. Connect the USB flash drive directly to the USB port. 0 The USB flash drive must be formatted to FAT32 or NTFS. 0 Not all USB flash drives are guaranteed to work.
Contents Connections Playback Settings Tips Appendix Bluetooth cannot be played back Bluetooth devices cannot be connected to this unit. 0 The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the Bluetooth device to enable the Bluetooth function. 0 Bring the Bluetooth device near to this unit. 0 The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
Contents Connections Playback Settings Tips Appendix The Internet radio cannot be played back A list of radio stations is not displayed in the HEOS App. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. (v p. 28) Internet Radio cannot be played. 0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can be played back in this unit are WMA, MP3 and MPEG-4 AAC. (v p.
Contents Connections Playback Settings Tips Appendix Music files on PC or NAS cannot be played back (Music server) Files stored on a computer cannot be played. 0 Files are stored in a non-compatible format. Record in a compatible format. (v p. 99) 0 Files that are copyright protected cannot be played on this unit. 0 Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC to this unit through the network. (v p.
Contents Connections Playback Settings Tips Appendix Various online services cannot be played Various online services cannot be played. 0 The online service may have been discontinued. Cannot connect to a wireless LAN network Cannot connect to the network. 0 Make sure your mobile device is connected to your wireless network before setting up this unit. (v p. 43) 0 You can connect this unit to your network router using an Ethernet cable sold separately.
Contents Connections Playback Settings Tips Appendix Cannot connect to a WPS Router. 0 Check that the WPS mode of the router is operating. 0 After you press the WPS button on the router, within two minutes, long press the CONNECT button on the remote control for five seconds or long. (v p. 74) 0 A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to “None”, WPA-PSK (AES) or WPA2-PSK (AES).
Contents Connections Playback Settings Tips Appendix Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical) “Unlocked” is displayed. 0 When digital audio signals cannot be detected properly, “Unlocked” is displayed. (v p. 40) “Unsupported” is displayed. 0 “Unsupported” is displayed when audio signals that are not supported by this unit are input. Check the audio output signal format from your digital device. (v p.
Contents Connections Playback Settings Tips Appendix Update/upgrade error messages If an update/upgrade is interrupted or fails, an error message appears. Display Description Connection failed. Please check your network, then try The network connection is unstable. again. Connection to the server failed. Check your network environment and try the update again. Update failed. Please check your network, then try again. The download of the firmware failed.
Contents Connections Playback Settings Tips Appendix Restoring the firmware to the factory defaults When the unit or the network functions do not work properly, operation may be improved by restoring the firmware to the factory defaults. Perform this operation if it does not work after attempting “General” - “Reset” of the settings menu. (v p. 70) After the firmware is restored, various settings are reset to the default settings. Configure the settings and update the firmware again.
Contents Connections Playback Settings Tips Appendix Playing back a USB flash drives 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/Apple Lossless/DSD) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly. o Specifications of supported files Sampling frequency 32/44.1/48 kHz 32/44.1/48 kHz 32/44.1/48/88.2/ 96/176.4/192 kHz 32/44.1/48 kHz 44.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Item Number of folder directory levels z1 o Specifications of supported audio formats USB flash drive n HDMI ARC/Coaxial/Optical 8 levels Number of folders 500 Number of filesz2 5000 Linear PCM (2-channel) z1 The limited number includes the root folder. z2 The allowable number of files may differ according to the USB flash drive capacity and the file size.
Contents Connections Playback Settings Playing back a Bluetooth device This unit supports the following Bluetooth profile. : 0 A2DP（Advanced Audio Distribution Profile） When a Bluetooth device that supports this standard is connected, monaural and stereo sound data can be streamed at a high quality. : 0 AVRCP（Audio/Video Remote Control Profile） When a Bluetooth device that supports this standard is connected, the Bluetooth device can be operated from this unit.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly. 0 A server or server software compatible with distribution in the corresponding formats is required to play music files via a network.
Contents Connections Playback Settings Playing back Internet Radio o Playable broadcast station specifications Sampling frequency Bit rate Extension WMA 32/44.1/48 kHz 48 – 192 kbps .wma MP3 32/44.1/48 kHz 32 – 320 kbps .mp3 MPEG-4 AAC 32/44.1/48 kHz 48 – 320 kbps .aac/ .m4a Last function memory This function stores the settings which were made before going into the standby mode.
Contents Connections Playback Settings Tips Appendix About HDMI This unit supports the following HDMI functions. 0 ARC (Audio Return Channel) function Enjoy movies, music, etc., on your TV simply by connecting an ARC function-compatible TV to this unit via HDMI. 0 HDMI control function Connect an HDMI control-compatible TV and this unit via HDMI and enable the HDMI control to enable linked control from either device.
Contents Connections Playback Settings Tips Appendix Explanation of terms o Audio FLAC (Free Lossless Audio Codec) FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Contents Connections Playback Settings Tips Appendix o Network Sampling frequency Sampling involves taking a reading of a sound wave (analog signal) at regular intervals and expressing the height of the wave at each reading in digitized format (producing a digital signal). The number of readings taken in one second is called the “sampling frequency”. The larger the value, the closer the reproduced sound is to the original.
Contents Connections Playback Settings Tips Appendix o Other WPA-PSK/WPA2-PSK (Pre-shared Key) This is a simple authentication system for mutual authentication when a preset character string matches on the wireless LAN access point and client. Source direct Playback with higher fidelity to the source becomes possible, as input audio signals are output by bypassing the audio quality-control circuits (BASS/TREBLE/BALANCE).
Contents Connections Playback Settings Tips Appendix Trademark information Apple, AirPlay, iPad, iPad Air, iPad Pro and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. The trademark “iPhone” is used in Japan with a license from Aiphone K.K. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.
Contents Connections Playback Settings Tips Specifications o Audio amplifier RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) : 70 W x 2 (8 Ω/ohms load) 100 W x 2 (4 Ω/ohms load) Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) : 0.02 % Frequency response (CD, 1 W, 8 Ω/ohms load) : 5 Hz – 100 kHz ±3 dB Dumping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : 100 and over Input sensitivity/impedance: PHONO (MM): 1.
Contents Connections Playback Settings Tips o Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n/ac (Wi-Fi® compliant) z1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Used frequency range: 2.4 GHz, 5 GHz z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
Contents Connections Playback Settings Tips Appendix o Bluetooth section Communications system: Bluetooth Specification Version 4.2 Transmission power: Bluetooth Specification Power Class 1 Maximum communication range: Approx. 98.4 ft/30 m in line of sight z2 Used frequency range: 2.4 GHz Modulation scheme: FHSS（Frequency-Hopping Spread Spectrum） Supported profiles: A2DP (Advanced Audio Distribution Profile) 1.2 AVRCP (Audio Video Remote Control Profile) 1.
Contents Connections Playback Settings o General Operating temperature: 41 °F - 95 °F (5 °C - 35 °C) Power supply: AC 120 V, 60 Hz Power consumption: 220 W Power consumption in standby modes : 0.3 W Power consumption in “Network Control” – “On” mode: 2W 0 For purposes of improvement, specifications and design are subject to change without notice.
Contents Connections Playback Settings Tips 10 1/2 (265) 3/4 (18) 2 5/8 (66) 17 1/8 (432) 15 1/8 (382) 2 1/8 (51) 1 3/8 (32) o Dimensions (Unit : in. (mm)) 2 3/8 (60) 2 1/2 (61) 12 3/4 (321) 7 3/4 (194) 5 1/8 (130) 5/8 (15) 4 5/8 (115) 17 1/2 (443) 2 1/2 (61) o Weight : 36 lbs 13 oz (16.
Contents Connections Index Playback Settings vF vA Auto Standby ................................................. 69 vB Bluetooth device ............................................ 37 vD Appendix vM Front panel ....................................................... 8 AirPlay ............................................................ 56 Tips vH Menu map ...................................................... 63 vN HEOS Account ............................................... 45 NAS .........
Contents Connections vR Playback Settings vU Rear panel ...................................................... 11 Remote control unit ........................................ 14 vS USB flash drive ......................................... 27, 54 vW Wi-Fi settings ................................................. 71 Sleep timer ..................................................... 61 Wired LAN ................................................ 28, 71 Spotify ..........................................
3520 10833 00AM ©2021 Sound United. All Rights Reserved.
