Owner's Manual

General
Lighting
The brightness of the lighting LED can be adjusted between 4 levels. The
brightness can also be synchronized to the brightness of the display.
Switching the display off reduces a source of noise that affects sound
quality, enabling higher sound quality playback.
Sync
(Default):
The brightness is synchronized to the
brightness of the display. (v p. 61)
Bright / Dim / Dark / Off
0
When the display brightness is set to off using the DIMMER button, the lighting
LED turns off regardless of the “Lighting” setting. (v p. 61
)
Auto-Standby
Sets the amount of time that must elapse without unit operation or an input
signal before the unit goes into standby automatically.
Off
(Default):
The unit does not go into standby
automatically.
1min: The unit goes into standby after 1 minutes.
5min: The unit goes into standby after 5 minutes.
15min: The unit goes into standby after 15 minutes.
30min: The unit goes into standby after 30 minutes.
60min: The unit goes into standby after 60 minutes.
90min: The unit goes into standby after 90 minutes.
Contents Connections Playback Settings Tips Appendix
69
Front panel Rear panel
Remote control
unit
Index