Operation Manual

9
Connecting other equipment Remote control jacks connection
IfthisunitisconnectedtoaMarantzamp,theampcanbecontrolledviathisunitusingthe
Marantz Remote App or web control function (vpage 37). Also, remote control signals
receivedbytheampcanbeusedtocontrolthisunit.
n Connection
Usethesuppliedremoteconnectioncable
to connect the REMOTE CONTROL IN
terminalofthisunittoREMOTECONTROL
OUTterminaloftheamplier.
n Setting
Settheremotecontrolswitchontherear
panel of this unit to “EXT.” to use this
feature.
•This setting will disable remote sensor
receptionofthisunit.
•To operate the unit, point the remote
control at the remote sensor of the
amplier.
Tousethisunit withoutconnectingittothe
amplier, set the remote control switch to
“INT.”.
Amplifier
Setto“EXT.”
The unit
RS-232C
Connect an external control device or other
deviceforservicing.(Useastraightcablefor
theconnection.)
Externalcontroldevice
FLASHER IN
This unit can be controlled by connecting a
controlboxorothercontroldevicetothisunit.
Controlboxorcontroldevice
GND
Signal
Monauralmini-plugcable
TousetheFLASHERINjack,settheremote
controlswitchto“INT.”.
Preparation
Operation
Information
Preparation