Operation Manual

13
n Update on web screen
Firmwarecanbeupdatedusingthe“Webcontrolfunction”
(vpage37).
“Web control function” (vpage 37) settings must
becompleted inadvance onaPC belongingto thesame
network.
For information on obtaining update les, please contact
ourcustomerservicecenter.
1
Click r from step 5 for the “Web control function”
(vpage37).
ThePCwilldisplaythefollowingscreen.
Waitforapproximately1minute.
You can also gain access by entering the IP address
shownbytheunitintoawebbrowser.
Please wait for a minute...
FIRMWARE
GThe web displayH
GThe unit’s screen displayH
2
When the following screen is displayed by the PC,
click the “Choose File” (q) button, select the update
file, and click the “Upload” (w) button.
Firmware
Upload new firmware
Upload
Choose File
q
w
General Settings [General]
3
When the following screen is displayed, click the
“OK” (e) button.
Updatingwillbegin.
Firmware
Warning:
Once started,the upload process cannot be interrupted or adorted,
in order to ensure the integrity of the Digital Media Player.
Are you sure you want to proceed?
OK
e
NOTE
Donotoperatetheunitwhileupdatingisinprogress.
4
When the following screen is displayed, updating is
complete.
Firmware
New Firmware:
xxx.fw
Firmware upload status: 100% completed.
The upload process finished successfully.
Please close this.
ButtonnamesmayvarydependingontheOSlanguageused
onyourcomputer.

n Notification
Update
Displays a notication message on this unit’s menu screen
whenthelatestrmwareisreleasedwith“Update”.
Connect to broadband Internet (vpage 8) when using
thisfunction.
1
Press MENU.
TurnsontheMenusettingsmode
and the Menu appears on the
display (vpage 11 “Menu
map”).
2
Use ui and ENTER to select
“General” – “Firmware” –
“Notification” – “Update”, then
press ENTER or p.
“Update Notication” menu
appears.
3
Use ui to select “On”, then press ENTER or p.
On
Displayupdatemessage.
O
Donotdisplayupdatemessage.
•When you press ENTER during display of the notication
message, the “Check For Update” is displayed. (Refer to
page12formoreinformationon“Update”.)
•Press
otoerasethenoticationmessage.
Preparation
Operation
Information
Preparation