Operation Manual

14
General Settings [General]
Upgrade
Display a notication message on this unit’s menu screen
when downloadable rmware is released with “Add New
Feature”.
Connect to broadband Internet (vpage 8) when using
thisfunction.
1
Press MENU.
TurnsontheMenusettingsmode
and the Menu appears on the
display (vpage 11 “Menu
map”).
2
Use ui and ENTER to select
“General” – “Firmware” –
“Notification” – “Upgrade”,
then press ENTER or p.
“Upgrade Notication” menu
appears.
3
Use ui to select “On”, then press ENTER or p.
On
Displayupgrademessage.
O
Donotdisplayupgrademessage.
•When you press ENTER during display of the notication
message, the “Add New Feature” is displayed. (Refer to
page14formoreinformationon“AddNewFeature”.)
•Press
otoerasethenoticationmessage.
n Add New Feature
•Inordertoaddnewfunctions,theenvironmentandsettings
requiredforconnecting tobroadbandinternetareneeded
(vpage8).
•Perform the add new feature operation after at least 2
minuteshaselapsedsinceturningthisunit’spoweron.
1
Press MENU.
TurnsontheMenusettingsmode
and the Menu appears on the
display (vpage 11 “Menu
map”).
2
Use ui to select “General”
– “Firmware” – “Add New
Feature”, then press ENTER or
p.
Upgrade Status
Display a list of the additional functions
providedbytheupgrade.
Upgrade Start
Executetheupgradeprocess.
•Iftheupgradeisnotsuccessful,anerrormessageidentical
to those in “Update”(vpage 12) will appear on the
display.Checkthesettingsandnetworkenvironment,then
updateagain.
Upgrade ID
The ID number shown on this screen is
neededwhencarryingouttheprocedure.
SeetheMarantzwebsitefordetailsaboutupdates.
When theprocedure is complete,“Registered” is displayed
andupdatescanbecarriedout.Iftheprocedurehasnotbeen
carriedout,“NotRegistered”isdisplayed.
[Notes concerning use of “Update” and
“Add New Feature”]
•Do not turn o the power until updating or upgrading is
completed.
•Even with a broadband connection to the Internet,
approximately 20 minutes is required for the updating/
upgradingproceduretobecompleted.
•Onceupdating/upgradestarts,normaloperationsonthisunit
cannotbeperformeduntilupdating/upgradingiscompleted.
•Furthermore,updating/upgradingthermwaremayresetthe
backupdatafortheparameters,etc.setforthisunit.
•Iftheupdateorupgradefails,removeandre-insertthepower
cord. “Update Retry” appears on the display and update
restarts from the point at which update failed. If the error
continuesdespitethis,checkthenetworkenvironment.
•Informationregardingthe“Update”functionand“AddNew
Feature”will beannounced onthe Marantzweb siteeach
timerelatedplansaredened.
•When usable new rmware is released with “Update” or
“AddNewFeature”,anoticationmessageisdisplayedon
themenuscreen.Whenyoudonotwanttobenotied,set
“Update” (vpage 13) and “Upgrade” (vpage 14) to
“O”.
Preparation
Operation
Information
Preparation