Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Reset
- Bluetooth PIN (0000)
- Features
- Video Conversion Function
- Panel Lock Function
- Remote Lock Function
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Connections
- Playback
- Power On
- Selecting the Source
- Volume / Mute
- Playing a Blu-ray / DVD Player
- iPod
- USB Device
- Bluetooth Operation
- Tuner Operation
- Internet Radio
- Playing Back Files Stored On a PC and NAS
- Listening to Pandora
- Listening to SiriusXM Internet Radio
- AirPlay Function
- Spotify Connect Function
- Convenience Functions
- Selecting a Sound Mode
- HDMI Control Function
- Smart Menu Function
- Sleep Timer
- Smart Select Function
- Web Control
- Panel Lock Function
- Remote Lock Function
- Zone 2
- Settings
- About HDMI
- Video Conversion Function
- Sound Modes and Channel Output
- Sound Modes and Parameters
- Types of Input Signals, and Corresponding Surround Modes
- Glossary
- Tips
- Troubleshooting
- Specs
- Index
- Microphone Stand Assembly Instructions
- DTS:X Ready Information
- Firmware Update Information
- Spotify
- Speaker Wire Labels
- Spec Sheet
- Warranty
o
Power does not turn on / Power is turned off
Symptom Cause / Solution Page
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. 64
Power automatically turns
off.
0
The sleep timer is set. Turn on the power again. 137
0
“Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To
disable “Auto Standby”, set “Auto Standby” on the menu to “Off”.
216
Power turns off and the
power indicator flashes in
red approx. every 2
seconds.
0
The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off,
wait about an hour until this unit cools down sufficiently, and then turn the power on again.
270
0
Please re-install this unit in a place having good ventilation. -
Power turns off and the
power indicator flashes in
red approx. every 0.5
seconds.
0
Check the speaker connections. The protection circuit may have been activated because speaker cable
core wires came in contact with each other or a core wire was disconnected from the connector and
came in contact with the rear panel of this unit. After unplugging the power cord, take corrective action
such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire.
33
0
Turn down the volume and turn on the power again. 66
0
This unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center. -
Power does not turn off
even when the power
button is pressed, and the
display shows “ZONE2
On”.
0
The power supply of ZONE2 is turned to ON. To turn off the power supply of this unit (standby), press the
ZONE2 ON/OFF on the main unit, or press the POWER X button after pressing the ZONE2 button on the
remote control unit to turn off the power supply of ZONE2.
-
Contents Connections Playback Settings Tips Appendix
230
Front panel Display Rear panel Remote Index