Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Manual
- Reset
- Bluetooth PIN (0000)
- Features
- Video Conversion Function
- Panel Lock Function
- Remote Lock Function
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Connections
- Playback
- Power On
- Selecting the Source
- Volume / Mute
- Playing a Blu-ray / DVD Player
- iPod
- USB Device
- Bluetooth Operation
- Tuner Operation
- Internet Radio
- Playing Back Files Stored On a PC and NAS
- Listening to Pandora
- Listening to SiriusXM Internet Radio
- AirPlay Function
- Spotify Connect Function
- Convenience Functions
- Selecting a Sound Mode
- HDMI Control Function
- Smart Menu Function
- Sleep Timer
- Smart Select Function
- Web Control
- Panel Lock Function
- Remote Lock Function
- Zone 2
- Settings
- About HDMI
- Video Conversion Function
- Sound Modes and Channel Output
- Sound Modes and Parameters
- Types of Input Signals, and Corresponding Surround Modes
- Glossary
- Tips
- Troubleshooting
- Specs
- Index
- Microphone Stand Assembly Instructions
- DTS:X Ready Information
- Firmware Update Information
- Spotify
- Speaker Wire Labels
- Spec Sheet
- Warranty
Speaker connection
Here we connect the speakers in the room to this unit.
This section explains how to connect them using typical examples.
NOTE
0
Disconnect this unit’s power plug from the power outlet before connecting the
speakers. Also, turn off the subwoofer.
0
Connect so that the speaker cable core wires do not protrude from the speaker
terminal. The protection circuit may be activated if the core wires touch the rear
panel or if the + and - sides touch each other. (“Protection circuit” (v
p. 270))
0
Never touch the speaker terminals while the power cord is connected. Doing so
could result in electric shock. When the “Setup Assistant” (page 8 in the separate
“Quick Start Guide”) is running, follow the instructions in the “Setup Assistant”
screen for making connections. (Power is not supplied to the speaker terminals
while the “Setup Assistant” is running.)
0
Use speakers with an impedance of 4 – 16 Ω/ohms.
NOTE
0
Carry out the following settings when using a speaker with an impedance of 4 – 6
Ω/ohms.
1.
Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same
time for at least 3 seconds.
“V.Format:< NTSC>” appears on the display.
2.
Press DIMMER on the main unit twice.
“Sp.Imp.:<8ohms>” appears on the display.
3.
Press ZONE2 SOURCE or INTERNET RADIO on the main unit to select the
impedance.
6ohms:
Select when the impedance for any of the connected speakers is
6 Ω/ohms.
4ohms:
Select when the impedance for any of the connected speakers is
4 Ω/ohms.
4.
Press the main unit’s STATUS to complete the setting.
Contents Connections Playback Settings Tips Appendix
33
Front panel Display Rear panel Remote Index