Operation Manual

112
Video
TV Format
Default settings are underlined.
Set the video signal format to be output for the TV you are using.
Setting items Setting details
Format
NTSC : Select NTSC output.
PAL : Select PAL output.
“Format” can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit’s STATUS and ZONE2 SOURCE for at least
3 seconds.
“V.Format : <NTSC>” appears on the display.
2. Use the main unit’s INTERNET RADIO or ZONE2 SOURCE and set the
video signal format.
3. Press the main unit’s STATUS to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Basic version
Advanced version
Informations
Advanced version
DVD