Operation Manual

151
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
X ON/STANDBY
INTERNET RADIO
ZONE2 SOURCE
1
Turn off the power using X.
2
Press X ON/STANDBY while simultaneously pressing INTERNET RADIO and
ZONE2 SOURCE.
3
Once the display starts ashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
Basic version
Advanced version
InformationsInformations
DVD