Contents Connections Playback Settings Tips Appendix . Integrated Amplifier PM5005 You can print more than one page of a PDF onto a single sheet of paper.
Contents Connections Playback Settings Connecting speakers Speaker A/B connection Bi-wiring connection Connecting a playback device Connecting a recording device Connecting devices with remote control connectors Performing operations by RC on this unit without visual contact Remotely connecting Marantz audio devices Connecting the power cord Rear panel Remote control unit 17 18 19 20 21 22 22 22 23 Playback Turning the power on Selecting the speakers for audio output Selecting the input source Adjus
Contents Connections Playback Settings Appendix Tips Settings Setting the Auto Standby mode Turning Auto Standby mode off Turning Auto Standby mode on Setting the remote signal receiving function Disabling the remote signal receiving function of the remote control unit Enabling the remote signal receiving function of the remote control unit Setting remote control codes Setting remote control codes for the remote control Setting remote control codes for this unit Front panel Tips Rear panel Remote
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . . . Check that the following parts are supplied with the product. CD-ROM (Owner’s Manual) Safety Instructions . . .
Connections Contents Playback Settings Inserting the batteries 1 Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Appendix Features High quality sound High performance 0 All-discrete current feedback amplifier 0 0 0 0 0 Tone control function This unit uses a high-speed current feedback amplifier circuit for its preamplifier and power amplifier so that signals from the Super Audio CD player can be amplified with high fidelity. The high-speed current feedback amplifier reproduces a natural sound space.
Contents Connections Playback Settings Easy operation 0 Remote control compatible with CD players and network audio players The remote control provided with this unit can control Marantz CD players and network audio players in addition to this unit. (v p. 12) This unit can also switch between three remote control codes. When using three units in the same area, you can set a different remote control code for each unit to control them independently. (v p.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel q w e r . u i o t Q0 Q1 Q2 Rear panel Q4 B Power indicator This is lit as follows according to the power status: 0 Power on : Off 0 Standby : Red 0 Power off : Off 0 When the protection circuit is activated : Red (blinking) A Power operation button (X) This turns the power on/off. (v p.
Contents Connections e r Playback t Settings Tips Appendix H BASS control knob This setting adjusts the volume level for the bass. (v p. 26) y I SOURCE DIRECT button/indicator This turns SOURCE DIRECT mode on/off. (v p. 27) J TREBLE control knob This setting adjusts the volume level for the treble. (v p. 26) . u i o Q0 Q1Q2 Q3 K Speaker switching buttons/indicators (SPEAKERS A/B) These select the speaker for audio output. (v p.
Contents Connections Playback Settings Tips Appendix Rear panel . q e r w t y u i o Q0 A SIGNAL GND jacks Used to connect a turntable. (v p. 20) F Network audio player input connectors (NETWORK) Used to connect a network audio player. (v p. 20) B AC inlet (AC IN) Used to connect the power cord. (v p. 23) G Recorder input/output connectors (RECORDER 1) Used to connect the input/output connector of a recorder. (v p. 21) C Turntable input connectors (PHONO) Used to connect a turntable.
Contents Connections Playback Settings Tips Remote control unit o Amplifier operations A Input source select buttons This selects the input source. (v p. 26) r B SOURCE DIRECT button This turns SOURCE DIRECT mode on/off. (v p. 27) q C MUTE button (:) This mutes the output audio. (v p. 26) w D AMP POWER button (X) This turns the power on/off (standby). (v p. 25) t E VOLUME buttons (df) These adjust the volume level. (v p. 26) .
Contents Connections Playback Settings Tips Appendix o CD player operations The supplied remote control can be used to control a Marantz CD player in addition to this unit. To operate a Marantz CD player, press the REMOTE MODE CD button to switch the remote control to the CD player operation mode. 0 REMOTE MODE CD button lights for approximately two seconds.
Contents Connections Playback Settings Tips Appendix N Pause button (3) O Play button (1) P Playback mode switching button (MODE) Q ENTER button R SETUP button S CLEAR button T REPEAT A-B button U REPEAT button (L) Q4 Q5 The amplifier can be operated with the amplifier operation buttons even when the remote control operation mode is set to CD. Q6 Q7 Q8 Q9 .
Contents Connections Playback Settings Tips Appendix o Network audio player operations The remote control provided with this unit can control a network audio player in addition to this unit. To operate a Marantz network audio player, press the REMOTE MODE NET button to switch the remote control to the network audio player operation mode. 0 REMOTE MODE NET button lights for approximately two seconds.
Contents Connections Playback Settings Tips Appendix M Pause button (3) N Play button (1) O Playback mode switching button (MODE) P ENTER button Q SETUP button R CLEAR button S Search button (SEARCH) T REPEAT button (L) Q3 Q4 The amplifier can be operated with the amplifier operation buttons even when the remote control mode is NET. Q5 Q6 Q7 Q8 .
Contents Connections Playback Settings o Contents Tips Appendix o Cables used for connections 17 Connecting a playback device 20 Connecting a recording device 21 Connecting devices with remote control connectors 22 Connecting the power cord 23 Provide necessary cables according to the devices you want to connect. Speaker cable . Connecting speakers NOTE Audio cable . 0 Do not plug in the power cord until all connections have been completed.
Contents Connections Playback Settings Tips Appendix Connecting speakers o Connecting the speaker cables NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. 0 Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and - sides touch each other. (“Protection circuit” (v p.
Contents Connections Playback Settings Tips Appendix Speaker A/B connection This unit is equipped with two sets of speaker terminals (SPEAKER A and SPEAKER B). One set of speakers can be connected to each set of terminals, and a total of two sets of speakers can be connected. The same signal is output from the SPEAKERS A and SPEAKERS B terminals. When only one set of speakers is to be connected, use either the SPEAKERS A or SPEAKERS B terminals. SPEAKERS B SPEAKERS A (L) q w (L) q w .
Contents Connections Playback Settings Tips Appendix Bi-wiring connection This connection limits the effects of signal interference between the high range speakers (tweeters) and low range speakers (woofers), allowing you to enjoy high quality playback. When bi-wiring with bi-wireable speakers, connect the mid and high range terminals to SPEAKERS A (or SPEAKERS B), the low range terminals to SPEAKERS B (or SPEAKERS A).
Contents Connections Playback Settings Tips Appendix Connecting a playback device You can connect turntables, tuners, CD players and network audio players to this unit. This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
Contents Connections Playback Settings Tips Connecting a recording device Recording Device (Device 2) Recording Device (Device 1) AUDIO IN R L AUDIO OUT R AUDIO IN L R L AUDIO OUT R L L R L R L R L R L R L R L R L . R NOTE Never insert the short-circuiting pin plug into the recording output connectors (RECORDER). Doing so could result in damage.
Contents Connections Playback Settings Tips Appendix Connecting devices with remote control connectors Remotely connecting Marantz audio devices Performing operations by RC on this unit without visual contact You can transmit remote control signals simply by connecting a Marantz audio device to the REMOTE CONTROL IN/OUT connectors using the remote connection cable provided with the device.
Connections Contents Playback Settings Connecting the power cord Wait until all connections have been completed before connecting the power cord. To household power outlet (AC 230 V, 50/60 Hz) .
Contents Connections Playback Settings o Contents Turning the power on 25 Selecting the speakers for audio output 26 Selecting the input source 26 Adjusting the volume 26 Turning off the sound temporarily (Muting) 26 Adjusting the tone 26 Playing CDs 27 Recording 28 Front panel Rear panel Remote control unit 24 Index Tips Appendix
Contents Connections Playback Settings Appendix Turning the power on AMP POWER X 1 Input source select buttons SOURCE DIRECT Tips Press X on this unit to turn the power on. Input indicator for the selected source lights. 0 Press AMP POWER X to turn on power from standby mode. 0 You can turn the INPUT SELECTOR when the unit is in standby mode to turn on the power. VOLUME df MUTE NOTE . Turn VOLUME on this unit to adjust the volume to the lowest level before turning on the power.
Contents Connections Playback Settings Selecting the speakers for audio output 1 Appendix Adjusting the volume 1 Press SPEAKERS A/B to select the speaker system to be used for playback. The indicator of the selected speakers lights. Press VOLUME df to adjust the volume. You can also adjust the master volume by turning VOLUME on the main unit. When using headphones, press SPEAKERS A/B to turn off all of the indicators and turn audio output from the speaker terminals off.
Contents Connections Playback Settings The signal does not pass through the tone adjustment circuitry (BASS, TREBLE and BALANCE), resulting in playback of a higher sound quality. This section uses playback from a CD as an example. Press X on this unit to turn the power on. 1 Press the input source select button to switch the input source to “CD”. Press VOLUME df to adjust the volume. 1 Rear panel Remote control unit The SOURCE DIRECT indicator lights.
Contents Connections Playback Settings Recording Audio signals input into this unit can be output to an external recording device. When recording audio from a playback device connected to this unit, audio can be recorded with the playback device still connected to this unit. 1 2 Press X on this unit to turn the power on. Press the input source select button to switch to the input source from which you want to record. The indicator of the selected input source lights. 3 Recording starts.
Contents Connections Playback Settings o Contents Setting the Auto Standby mode 30 Setting the remote signal receiving function 31 Setting remote control codes 32 Front panel Rear panel Remote control unit 29 Index Tips Appendix
Contents Connections Playback Settings Tips Appendix Setting the Auto Standby mode You can set the unit to automatically switch to standby mode if the unit is not operated for 30 minutes when there is no audio input (Auto Standby mode). Auto Standby mode is set to on by default. Turning Auto Standby mode off 1 Press and hold SOURCE DIRECT for more than 5 seconds to turn the Auto Standby mode off. The power indicator flashes once.
Contents Connections Playback Settings Tips Appendix Setting the remote signal receiving function When you connect a IR receiver (sold separately) to the REMOTE CONTROL IN connector of this unit, use the following procedure to disable the remote signal receiving function of this unit. When the function is enabled, you can not perform operations with the remote control unit. By default, this function is enabled.
Contents Connections Playback Settings Tips Appendix Setting remote control codes Remote control codes are set between this unit and the supplied remote control. You can select one of the three types of remote control codes, and the remote control can be used to control the unit when the same remote control code is used. If three of these units are used in the same location, all three units can be controlled simultaneously using one remote control in the default settings.
Contents Connections Playback Settings Setting remote control codes for the remote control 1 Hold down REMOTE MODE CD and the number 2 button for more than 5 seconds. Point the remote control for which the remote control code was set at this unit, and press REMOTE MODE CD and ENTER. The input indicators on the unit flash as shown below according to the set remote control code. o To set the remote control codes to AMP3 1 Hold down REMOTE MODE CD and the number 3 button for more than 5 seconds.
Contents Connections Playback Settings Tips Appendix o Contents Troubleshooting Tips I want to adjust the tone myself 35 Power does not turn on / Power is turned off 36 I want sound playback that is faithful to the original sound 35 Operations cannot be performed through the remote control unit 37 No sound comes out 38 Desired sound does not come out 38 Sound is interrupted or noise occurs 39 I want to hear music that is close to the original sound quality at low volume 35 I want to
Contents Connections Playback Settings Tips I want to adjust the tone myself 0 Use the BASS, TREBLE and BALANCE knobs to adjust the sound as desired. (v p. 26) I want sound playback that is faithful to the original sound 0 Set the Source Direct mode on. (v p. 27) I want to hear music that is close to the original sound quality at low volume 0 Turn the LOUDNESS mode on. (v p.
Contents Connections Playback Settings Tips Appendix Troubleshooting 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section. If none of the symptoms are applicable, consult your dealer as it could be due to a fault in this unit. In this case, disconnect the power immediately and contact the store where you purchased this unit.
Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause / Solution 0 Batteries are worn out. Replace with new batteries. 5 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°. 5 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix o No sound comes out Symptom No sound comes out of speakers. Cause / Solution 0 Check the connections for all devices. Page 16 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the 17 0 Securely tighten the speaker terminals.
Contents Connections Playback Settings Tips Appendix o Sound is interrupted or noise occurs Symptom Cause / Solution When playing a record, the 0 Adjust to a proper needle pressure. sound is distorted. 0 Check the tip of the needle. When playing a record, a humming noise comes out of the speakers. When playing a record, a humming noise comes out of the speakers when the volume is high. (Howling phenomenon) Front panel Page － － 0 Replace the cartridge.
Contents Connections Playback Settings Explanation of terms Speaker impedance This is an AC resistance value, indicated in Ω (Ohms). Greater power can be obtained when this value is smaller. Source direct Playback with higher fidelity to the source becomes possible, as input audio signals are output by bypassing the audio quality-control circuits (BASS/TREBLE/BALANCE).
Connections Contents Playback Settings Specifications 0 RMS Power output (40 Hz – 20 kHz simultaneous drive of both channels) : 40 W x 2 (8 Ω/ohms load) 55 W x 2 (4 Ω/ohms load) 0 Total harmonic distortion (40 Hz – 20 kHz simultaneous drive of both 0.01 % 0 Output band width (8 Ω/ohms load, 0.
Contents Connections Playback Settings Tips 14 91 440 105 16 225 60 370 329 45 25 o Dimensions (Unit : mm) 56 340 50 . 50 o Weight : 6.
Contents Connections Index Playback Settings vL LOUDNESS mode ......................................... 27 vA Adjusting the tone .......................................... 26 Adjusting the volume ...................................... 26 Auto Standby mode ........................................ 30 vP Protection circuit ............................................ 40 vR Remote control ............................................... 22 vB BALANCE ......................................................
D&M Holdings Inc.
