Contents Connections Playback Settings Tips Appendix .
Contents Connections Playback Rear panel Remote control unit Tips Appendix Connections 6 7 7 8 8 9 11 11 14 17 Accessories Inserting the batteries Operating range of the remote control unit Features High quality sound High performance Part names and functions Front panel Rear panel Remote control unit Front panel Settings Connecting speakers Connecting the speaker cables Connecting the subwoofer Connecting speakers Connecting a playback device Connecting a recording device Connecting to a device
Contents Connections Playback Settings Playback Front panel Rear panel Remote control unit Appendix Playing digital input AirPlay function Playing songs from your iPhone, iPod touch or iPad Playing iTunes music with this unit Play a song from your iPhone, iPod touch or iPad on multiple synced devices (AirPlay 2) Spotify Connect function Playing Spotify music with this unit Convenience functions Adding to HEOS Favorites Playing back HEOS Favorites Deleting a HEOS Favorites Adjusting the tone Playbac
Contents Connections Playback Settings Settings 71 76 77 77 78 79 79 79 80 80 81 81 81 82 82 85 85 Menu map Menu operation Inputting characters Using the number buttons Using the cursor buttons Audio Volume Limit Subwoofer - Low Pass Filter General TV Input IR Control Language Auto-Standby Usage Data Firmware Information Reset Front panel Rear panel Network Network Information Network & USB-A Wi-Fi Bluetooth Network Control Friendly Name Connection Settings Diagnostics HEOS Account You have not sign
Contents Connections Playback Settings Tips Appendix Appendix Tips Troubleshooting Power does not turn on / Power is turned off Operations cannot be performed through the remote control unit Display on this unit shows nothing No sound comes out Sound is interrupted or noise occurs Desired sound does not come out AirPlay cannot be played back USB memory devices cannot be played back File names on the USB memory device are not displayed properly Bluetooth cannot be played back The Internet radio cannot
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . Check that the following parts are supplied with the product.
Connections Contents Playback Settings Inserting the batteries 1 Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Appendix Features 0 Short power line layout High quality sound A short power line layout that integrates the power circuit and the output level of the power amplifier is used to improve instantaneous current supply. This layout uses the minimum necessary lines with a large current, arranged symmetrically on the left and right.
Contents Connections Playback Settings 0 Support for High Quality Audio playback via USB and networks Tips Appendix High performance This unit supports the playback of high resolution audio formats such as DSD (2.8/5.6 MHz) and WAV/FLAC/Apple Lossless Audio Codec (ALAC) files up to 192 kHz/24 bits. 0 Tone control function This unit has a tone control function for adjustment of bass (low frequency) and treble (high frequency) sound to produce your preferred tone. (v p.
Contents Connections Playback Settings Tips Appendix 0 HEOS provides streaming music from your favorite online music 0 Supports AirPlay 2® wireless audio sources Sync multiple AirPlay 2 compatible devices/speakers for simultaneous playback. This unit supports AirPlay 2 and requires iOS 11.4 or later. 0 Wireless connection with Bluetooth devices can be carried out easily You can enjoy music simply by connecting wirelessly with your smartphone, tablet, PC, etc. 0 Support for Gapless playback .
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel q w r e . o Q0 t y Q1 Q2 Q3 Remote control unit 11 Index For details, see the next page.
Contents qw e Connections rt Playback yu Settings Tips Appendix C INPUT SELECTOR knob This switches input sources. (v p. 38) i D DISPLAY OFF indicator This indicator lights up when the display is off. (v p. 69) E Display This displays various pieces of information. . F Cursor buttons (uio p) These select items. G Playback/Pause/ENTER button (1/3/ENTER) Plays back and pauses tracks, and enters the selected content. A Power operation button (X) This turns the power on/off (standby). (v p.
Contents Connections Playback Settings Tips Appendix K BASS control knob This setting adjusts the volume level for the bass. (v p. 68) L TREBLE control knob This setting adjusts the volume level for the treble. (v p. 68) M BALANCE control knob This adjusts the balance of the volume output from the left and right speakers. (v p. 68) . o Q0 Q1 Q2 N BACK button Returns to the previous item. Q3 Q4 Q5 O Remote control sensor This receives signals from the remote control unit. (v p.
Contents Connections Playback Settings Tips Appendix Rear panel q w COAXIAL e r t y u q OPTICAL DIGITAL AUDIO IN PHONO AC IN SIGNAL GND CD AUX RECORDER AUDIO IN . i RECORDER SUBWOOFER AUDIO OUT PRE OUT o Q0 For details, see the next page.
Contents q w COAXIAL Connections er Playback t Settings OPTICAL DIGITAL AUDIO IN AC IN C NETWORK connector Used to connect to a LAN cable when connecting to a wired LAN network. (v p. 32) SIGNAL GND CD AUX RECORDER AUDIO IN RECORDER SUBWOOFER AUDIO OUT PRE OUT Appendix B DIGITAL AUDIO IN connectors 0 Used to connect devices equipped with digital audio output connectors. (v p. 29) 0 This is used to connect USB storages (such as USB memory devices). (v p. 31) q PHONO Tips .
Connections Contents Playback y COAXIAL Settings u OPTICAL DIGITAL AUDIO IN PHONO AC IN SIGNAL GND CD AUX RECORDER . AUDIO IN i RECORDER SUBWOOFER AUDIO OUT PRE OUT o Q0 F REMOTE CONTROL connectors Used to connect to a Marantz audio device that is compatible with the remote control function. (v p. 34) G AC inlet (AC IN) Used to connect the power cord. (v p. 35) H AUDIO IN connectors Used to connect devices equipped with analog audio output connectors.
Contents Connections Playback Settings Tips Appendix Remote control unit A Remote control signal transmitter This transmits signals from the remote control unit. (v p. 7) q B Input source select buttons These select the input source. (v p. 38) C System buttons These perform playback related operations. w D Input source select button (INPUT) This switches input sources. (v p. 38) e E SOURCE DIRECT button This turns source direct mode on/off. (v p.
Contents Connections Playback Settings Tips Appendix H ENTER button This determines the selection. I Cursor buttons (uio p) These select items. J BACK button Returns to the previous item. K Number/letter buttons (0 – 9, +10) These enter letters or numbers into the unit. (v p. 77) L DIMMER button Adjust the display brightness of this unit. (v p. 69) M RANDOM button (P) Switches the random playback.
Contents Connections Playback Settings Tips Appendix N Power operation button (AMP X) This turns the power on/off (standby). (v p. 37) O Remote mode select button (REMOTE MODE AMP) Switches the remote control operating mode to this unit. Q4 Q5 P FAVORITES ADD / CALL buttons This allows you to register content to “HEOS Favorites” and call registered content. 0 “Adding toHEOS Favorites” (v p. 66) 0 “Playing backHEOS Favorites” (v p. 67) Q6 Q VOLUME buttons (df) Adjusts the volume. (v p.
Contents Connections Playback Settings Tips Appendix R OPTION button 0 This displays the option menu on the display. 0 An option menu is not displayed for some input sources. S MUTE button (:) This mutes the output audio. (v p. 38) T SETUP button The setting menu is displayed on the display. (v p. 76) U CLEAR button This cancels the settings. V SLEEP button This sets the sleep timer. (v p. 69) W REPEAT button (L) Switches the repeat playback.
Contents Connections Playback Settings Tips o CD player operations A Marantz CD player can be operated.
Contents Connections Playback Settings Tips L MODE button M SETUP button N CLEAR button O SLEEP button P REPEAT button (L) 0 The remote control may not operate some products.
Contents Connections Playback Settings o Contents Tips Appendix o Cables used for connections Connecting speakers 24 27 28 Connecting to a device with digital audio output connectors 29 Connecting a USB memory device to the USB port 31 Speaker cable . Connecting a playback device Connecting a recording device Provide necessary cables according to the devices you want to connect. 34 Connecting the power cord 35 Subwoofer cable . 32 Optical cable .
Contents Connections Playback Settings Tips Appendix Connecting speakers Connecting the speaker cables NOTE Carefully check the left (L) and right (R) channels and + (red) and - (white) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer.
Contents Playback Settings Tips Appendix Connecting the subwoofer Turn the speaker terminal clockwise to tighten it. Use a subwoofer cable to connect the subwoofer. COAXIAL OPTICAL . DIGITAL AUDIO IN PHONO Spade lug connector SIGNAL GND CD AUX RECORDER SUBWOOFER AUDIO OUT PRE OUT . AUDIO IN RECORDER When using a banana plug . Subwoofer .
Contents Connections Playback Settings Connecting speakers .
Contents Connections Playback Settings Tips Appendix Connecting a playback device You can connect turntables, tuners and CD players to this unit. This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect this unit to a turntable with a low output moving coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
Contents Connections Playback Settings Tips Connecting a recording device Recording device AUDIO OUT R AUDIO IN L R L R L R L R L R L COAXIAL OPTICAL DIGITAL AUDIO IN PHONO AC IN SIGNAL GND CD AUX RECORDER SUBWOOFER AUDIO OUT PRE OUT . AUDIO IN RECORDER NOTE 0 Never insert the short-circuiting pin plug into the analog audio output connectors (AUDIO OUT RECORDER). Doing so could result in damage.
Contents Connections Playback Settings Tips Appendix Connecting to a device with digital audio output connectors Use this connection to input digital audio signals to this unit, and convert the signals for playback using the D/A converter of this unit. (v p. 60) TV / Satellite receiver etc. COAXIAL OUT COAXIAL OPTICAL OUT OPTICAL DIGITAL AUDIO IN PHONO AC IN SIGNAL GND CD AUX RECORDER SUBWOOFER AUDIO OUT PRE OUT .
Contents Connections Playback Settings Tips NOTE 0 Linear PCM signals with a sampling frequency of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, or 192 kHz can be input into this unit. 0 Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers. o Specifications of supported audio formats See “D/A converter” (v p. 115).
Contents Connections Playback Settings Tips Appendix Connecting a USB memory device to the USB port For operating instructions see “Playing a USB memory device”. (v p. 44) USB memory device COAXIAL OPTICAL DIGITAL AUDIO IN PHONO SIGNAL GND CD AUX RECORDER SUBWOOFER AUDIO OUT PRE OUT . AUDIO IN RECORDER 0 Marantz does not guarantee that all USB memory devices will operate or receive power.
Contents Connections Playback Settings Tips Appendix Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below.
Contents Connections Playback Settings Wireless LAN 0 Built-in DHCP server This function automatically assigns IP addresses on the LAN. 0 Built-in 100BASE-TX switch When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater. 0 Only use a shielded STP or ScTP LAN cable (readily available at electronics stores). (CAT-5 or greater recommended) 0 The normal shielded-type LAN cable is recommended.
Contents Connections Playback Settings Tips Appendix Connecting devices with remote control connectors Performing operations by RC on this unit without visual contact Remotely connecting Marantz audio devices You can connect an external IR receiver to the REMOTE CONTROL connectors to perform operations on this unit with the supplied remote control unit without visual contact.
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet. AC IN To household power outlet (AC 120 V, 60 Hz) .
Contents Connections Playback Settings Tips Appendix o Contents Playback a device Basic operation Turning the power on 37 Switching the power to standby 37 Selecting the input source 38 Adjusting the volume 38 Turning off the sound temporarily (Muting) 38 Playing a USB memory device 39 Playing back files stored on PC or NAS 41 Getting the HEOS App 51 AirPlay function 62 Spotify Connect function 65 Front panel Rear panel Remote control unit Listening to music on a Bluetooth dev
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on AMP X 1 Input source select buttons 0 You can also press X on the main unit to turn on power from standby mode. 0 You can also press 1/3 to turn on power from standby mode. 1/3 INPUT Press AMP X to turn on. Switching the power to standby 1 VOLUME df MUTE Press AMP X. The unit switches to standby mode. 0 You can also switch the power to standby by pressing X on the main unit. NOTE .
Contents Connections Playback Settings Selecting the input source 1 Tips Appendix Adjusting the volume 1 Press the input source select button to be played back. The selected input source appears on the display. 0 This unit switches between Optical 1, Optical 2 and Coaxial each time OPT/COAX is pressed. 0 You can also press INPUT to select the input source. 0 You can also select the input source by turning INPUT SELECTOR on the main unit. Use VOLUME df to adjust the volume.
Contents Connections Playback Settings Tips Appendix Listening to Internet Radio 0 Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. 0 The Internet Radio station list on this unit the database service provided by TuneIn Radio service. INTERNET RADIO 0 The audio format types and specifications supported by this unit for playback are as follows. See “Playing back Internet Radio” (v p. 118) for details.
Contents Connections Playback Settings Listening to Internet Radio 1 2 NOTE Select the station you want to play. Operation buttons 0 The radio station database service may be suspended or be otherwise unavailable without notice. Function Playback / Pause Stop 2 89 z Skip to previous track / Skip to next track ui Select the item ENTER Enter the selected item / Playback BACK Moving up a level in the hierarchy FAVORITES CALL Call from the “HEOS Favorites” (v p.
Contents Connections Playback Settings Tips Appendix Playing back files stored on PC or NAS 0 This unit can play back music files and playlists (m3u, wpl) from DLNA compatible servers including PCs and NAS devices on your network. 0 The audio format types and specifications supported by this unit for playback are as follows. See “Playing back files stored on a PC and NAS” (v p. 117) for details.
Contents Connections Playback Settings 3 Playing back files stored on PC or NAS Use this procedure to play music files or playlists stored on DLNA files servers on your local network. 1 2 Tips Appendix Browse the music on your PC/NAS and select something to play. Press MUSIC SERVERS to switch the input source to “Music Servers”. 0 When you select something to play you will be asked how you want to queue up your music. Select the name of your networked PC or NAS (Network Attached Storage) server.
Contents 4 Connections Playback Settings Use ui to select the “Play Now” or “Play Now & Replace Queue”, then press ENTER. NOTE Function 1/3 Playback / Pause 2 Stop 89 Skip to previous track / Skip to next track ui Select the item ENTER Enter the selected item BACK Moving up a level in the hierarchy REPEAT L Repeat playback 0 Switching between Single-track repeat and All-track repeat. RANDOM P Random playback INFO Switching the album name and file format.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device 0 Playing back music files stored on a USB memory device. 0 Only USB memory devices conforming to mass storage class standards can be played on this unit. 0 This unit is compatible with USB memory devices in “FAT32” or “NTFS” format. USB 0 The audio format types and specifications supported by this unit for playback are as follows. See “Playing back a USB memory devices” (v p. 114) for details.
Contents Connections Playback Settings 4 Playing files stored on USB memory devices 1 2 3 Insert a USB memory device into the rear panel’s USB port. Select the name of this unit. 5 Browse the music on your USB memory device and select something to play. Play Now: Inserts the item into the queue after the currently playing track and plays the selected item immediately. Play Now & Replace Queue: Clears the queue and plays the selected item immediately.
Contents Connections Operation buttons Playback Settings Function 1/3 Playback / Pause 2 Stop 89 Skip to previous track / Skip to next track ui Select the item ENTER Enter the selected item / Playback BACK Moving up a level in the hierarchy REPEAT L Repeat playback 0 Switching between Single-track repeat and All-track repeat. RANDOM P Random playback INFO Switching the album name and file format.
Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Communication is possible up to a range of about 98.4 ft/30 m. NOTE Bluetooth 1/3 0 To play back music from a Bluetooth device, the Bluetooth device needs to support the A2DP profile. 9 8 INFO .
Contents Connections Playback Settings 3 Listening to music on a Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 2 4 Press Bluetooth. Remote control unit Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device. Play music using any app on your Bluetooth device.
Contents Connections Playback Settings Pairing with other Bluetooth devices 2 NOTE Activate the Bluetooth settings on your Bluetooth device. Press and hold Bluetooth on the remote control unit for at least 3 seconds. This unit will go into the pairing mode. 3 Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device. 0 This unit can be paired with a maximum of 8 Bluetooth devices.
Contents Connections Playback Settings Reconnecting to this unit from a Bluetooth device After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. This operation also needs to be performed when switching the Bluetooth device for playback. 1 2 3 4 If a Bluetooth device is currently connected, deactivate the Bluetooth setting of that device to disconnect it. Activate the Bluetooth setting of the Bluetooth device to be connected.
Contents Connections Playback Settings Tips Appendix Getting the HEOS App . You can use many online music streaming services from the HEOS App. Depending upon your geographical location, there are several options to choose from. Download the HEOS App for iOS or Android by searching App Store, Google Play store or Amazon Appstore for “HEOS”. 0 Specifications of the HEOS App may be changed without prior notice for improvement purposes.
Contents Connections Playback Settings Appendix o Changing your HEOS Account HEOS Account 1 2 HEOS Accounts can be registered in “HEOS Account” (v p. 93) in the menu of this unit or by tapping “Music” tab - “Settings” icon a in the HEOS App. o What is a HEOS Account? 3 4 A HEOS Account is master account or “keychain” for managing all of your HEOS music services with one single username and password. o Why do I need a HEOS Account? Tap the “Music” tab.
Contents Connections Playback Settings Tips Playing from streaming music services Appendix Rooms Drag one room into another to group them A music service is an online music company that provides access to vast music collections via free and/or paid subscriptions. Depending upon your geographical location, there are several options to choose from. Dining L + Dining R Song Name 1 Kitchen NOTE Song Name 2 0 The HEOS app and brand is not affiliated with any manufacturer of any mobile device.
Contents Connections Playback Settings Tips o Selecting the music track or station from music sources Music Tap the “Music” tab and select a music source. 0 All music services displayed may not be available in your location. This Phone Music Servers Playlists Rooms .
Contents Playback Settings Browse the music to play. Play Now: Inserts the item into the queue after the currently playing track and plays the selected item immediately. Play Now & Replace Queue: Clears the queue and plays the selected item immediately. Play Next: Inserts the item into the queue after the current song and plays it when the current song ends. Add to End of Queue: Adds the item to the end of the queue.
Contents Connections Playback Settings Listening to the same music in multiple rooms Tips Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining The HEOS system is a true multi-room audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 HEOS devices to your HEOS system.
Contents Connections Playback Settings Tips o Ungrouping rooms 1 2 Press and hold your finger on room that you want to remove from the group. Appendix Rooms Rooms Drag one room into another to group them Drag one room into another to group them Dining Dining Song Name 1 Drag it out of the group and lift your finger. Song Name 1 Living Living Song Name 2 NOTE Song Name 2 Living 0 You can not remove the first room that started playing the music before grouping.
Contents Connections Playback Settings o Grouping all rooms (party mode) Rooms You can easily group 16 rooms together into Party Mode by using a “pinch” gesture. Drag one room into another to group them Dining 1 Appendix Rooms Drag one room into another to group them Place two fingers on the screen over the list of rooms. Song Name 1 Living Dining Song Name 2 Quickly pinch your two fingers together and release.
Contents Connections Playback Settings o Ungrouping all rooms You can easily ungroup all of your rooms and exit Party Mode by using a “spread” gesture. 2 3 Rooms Rooms Drag one room into another to group them Dining Song Name 1 Place two fingers close together on the screen over list of rooms. 2 Dining Song Name 1 Living Song Name 2 Living 3 Kitchen Song Name 3 Kitchen Bedroom Bedroom All of your rooms will be ungrouped.
Contents Connections Playback Settings Tips Appendix Playing digital input 1 2 OPT/COAX 3 Prepare for playback. Check the connection, then turn on this units. (“Connecting to a device with digital audio output connectors” (v p. 29)) Press OPT/COAX to switch the input source to “Optical 1”, “Optical 2” or “Coaxial”. Play the component connected to this unit. 0 If the sampling frequency cannot be detected, “Signal Unlock” will be displayed.
Contents Connections Playback Settings 0 When “TV Input” is set in the menu, this unit automatically turns on when the TV connected to the unit is turned on, and the input source switches to “Optical 1”, “Optical 2” or “Coaxial”. (v p. 80) NOTE 0 Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers. o Specifications of supported audio formats See “D/A converter” (v p. 115).
Contents Connections Playback Settings Tips Appendix AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. 0 0 0 0 PC Input source will be switched to “AirPlay” when AirPlay playback is started. You can stop AirPlay playback by choosing other input source. For information about how to use iTunes, also see the Help for iTunes. The screen may differ depending on the OS and software versions. NOTE .
Contents Connections Playback Settings Playing songs from your iPhone, iPod touch or iPad 1 2 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit. Install iTunes 10, or later, on a Mac or Windows PC that is connected to the same network as this unit. Start iTunes and click the AirPlay icon to select this unit. 0 For details, see your device’s manual. Play the song on your iPhone, iPod touch or iPad. AirPlay icon is displayed on the iPhone, iPod touch or iPad screen.
Contents Connections Playback Settings 2 Play a song from your iPhone, iPod touch or iPad on multiple synced devices (AirPlay 2) Tips Tap the AirPlay icon. Displays a list of devices/speakers that can be played back on the same network. 0 A circle is displayed to the right of AirPlay 2 compatible devices. Songs from an iPhone, iPod touch or iPad operating iOS 11.4 or later can be synced with multiple AirPlay 2 supported devices for simultaneous playback.
Contents Connections Playback Settings Tips Appendix Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops. For information on how to set up and use Spotify Connect please visit www.spotify.
Contents Connections Playback Settings Tips Appendix Convenience functions 0 This section explains how to use convenient functions that can be used for each input source. 0 Control of “HEOS Favorites” operations is optimized for the app. For AMP X more information on acquiring the app, see “Getting the HEOS App” (v p. 51). Input source select buttons Adding to HEOS Favorites This function only works for streamed content.
Contents Connections Playback Settings Playing back HEOS Favorites 1 2 3 1 Press FAVORITES CALL. 2 Use ui to select the content you would like to playback, then press ENTER. Use ui to select “Play Now”, then press ENTER. 3 0 You can select content you would like to playback from your HEOS Favorites by pressing 0-9 and +10. Rear panel Remote control unit Appendix Deleting a HEOS Favorites The “HEOS Favorites” is displayed. Front panel Tips 67 Press FAVORITES CALL.
Contents Connections Playback Settings Adjusting the tone 1 2 The signal does not pass through the tone adjustment circuitry (BASS, TREBLE and BALANCE), resulting in playback of a higher sound quality. The SOURCE DIRECT indicator turns off. 1 Turn the BASS, TREBLE and BALANCE knobs to adjust the tone. 0 You can also press SOURCE DIRECT on the main unit to turn off source direct mode. Rear panel Appendix Playback in source direct mode Press SOURCE DIRECT to turn off source direct mode.
Contents Connections Playback Settings Switching the display’s brightness Appendix Using the sleep timer The display brightness can be adjusted between four levels. Switching the display off reduces a source of noise that affects sound quality, enabling higher sound quality playback. 1 Tips You can have the power automatically switched to standby once a set time has elapsed. This is convenient for listening while going to sleep. 1 Press DIMMER.
Contents Connections Playback Settings Recording Audio signals input into this unit can be output to an external recording device. When recording audio from a playback device connected to this unit, audio can be recorded with the playback device still connected to this unit. 1 2 Press AMP X to turn on. Press the input source select button to switch to the input source from which you want to record. The selected input source is displayed on the display. 3 Recording starts.
Contents Connections Playback Settings Tips Appendix Menu map For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. Setting items Audio Front panel Description Page Volume Limit Detailed items Make a setting for maximum volume. The volume cannot be increased above this setting. 79 Subwoofer - Low Pass Filter Sets the low pass filter for the subwoofer output.
Contents Connections Setting items General Playback Detailed items Tips Appendix Description/Detailed items Page TV Input Set this when playing audio from a TV on this unit. 80 IR Control Assign operations on this unit to the remote control of your TV. This enables you to operate this unit with the remote control of your TV. 81 Language Sets the language for display the menu. 81 Auto-Standby Sets the unit power to standby when the unit is not in use.
Contents Connections Setting items Network Playback Detailed items Tips Appendix Description/Detailed items Page Network Information Displays various information about the network. 86 Network & USB-A The network and USB memory playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. 86 Wi-Fi The Wi-Fi function can be stopped to prevent noise that affects the sound quality.
Contents Connections Setting items Network Playback Settings Detailed items Settings Description/Detailed items Used for manually setting the IP address. Diagnostics Front panel Rear panel Page 91 91 IP Addressz1 91 Subnet Maskz1 91 Gatewayz1 91 DNSz1 91 Save 91 Used to check the network connection. Connectionz2 92 92 Router Access 92 Internet Access 92 Wireless (Wi-Fi)” will be displayed.
Contents Connections Setting items HEOS Account Playback Settings Detailed items Tips Appendix Description Page 【When the user is signed out the HEOS Account】 I have a HEOS Account Selects to sign in. 93 Create Account Creates new HEOS Account. 93 Forgot Password If you have forgotten the password, an email explaining how to reset the password will be sent. 93 【When the user is signed in the HEOS Account】 Signed in As Displays your HEOS Account.
Contents Connections Playback Settings Tips Appendix Menu operation 1 2 3 4 Press SETUP. The menu is displayed on the display. Use ui to select the menu to be set or operated, then press ENTER. Use ui to change to desired setting. Press ENTER to enter the setting. 0 To return to the previous item, press BACK. 0 Exiting the Menu, press SETUP while the menu is displayed. The display returns to the normal display. ui ENTER SETUP .
Contents Connections Playback Settings Tips Appendix Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. 0 Friendly Name (v p. 87) 0 Character input for the network functions 3 Use 0 – 9, +10 until the desired character is displayed. 0 The types of characters that can be input are as shown in the following table. Using the number buttons 1 1.@-_/: abcABC2äàáâãåæćçčÄÀÁÂÃÅÆĆÇČ Display the screen for inputting characters.
Contents Connections Playback Settings 3 Using the cursor buttons 1 Appendix Repeat step 2 to input characters then press ENTER to register it. Display the screen for inputting characters. 0 Press CLEAR to erase the character that is currently selected. 0 Press and hold CLEAR for 3 seconds or more to erase all characters. 0 Press 9 to insert a space. 0 To change a character, use o p to align the cursor with the character that you want to change. Use ui to change the character.
Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. Subwoofer - Low Pass Filter Volume Limit Make a setting for maximum volume. The volume cannot be increased above this setting. Off (Default): Sets the low pass filter for the subwoofer output. Set this according to your speakers and subwoofer. The output audio signal has a lower frequency than the set value. Do not set a maximum volume.
Contents Connections Playback Settings Tips Appendix General o Auto-Play TV Input When a TV audio source is input to this unit, the unit automatically switches to the input source set in “Default Input” and the Auto-Play function for playing TV audio on this unit is set. Set this when playing audio from a TV on this unit.
Contents Connections Playback Settings IR Control Sets the language for display the menu. English / Français / Español (Default : English) Use ui to select the operation on this unit to be performed with the remote control of your TV and press ENTER. Auto-Standby Sets the amount of time that must elapse without unit operation or an input signal before the unit goes into standby automatically.
Contents Connections Playback Settings Usage Data Tips Appendix Firmware Checks for and installs the latest firmware information updates and upgrades. Also sets the upgrade notification message display. For product improvement purposes, please send information on the device settings and operating conditions of the functions to Marantz. Information provided by customers will be used as reference material for product development purposes in the future.
Contents Connections Playback Settings o Auto-Update Tips Appendix o Allow Update This unit will automatically update to the newest firmware when in standby mode. Enable or disable updates and upgrades for this unit. n Auto-Update This unit will automatically update to the newest firmware when in standby mode. On: Turns on Automatic Updates. Off (Default): Turns off Automatic Updates. On (Default): Enables this unit to receive updates and upgrades.
Contents Connections Playback Settings o Add New Feature Appendix Notes concerning use of “Update” and “Add New Feature” 0 In order to use these functions, you must have the correct system Display new features that can be downloaded to this unit and perform an upgrade. Upgrade Package: Display the items to be upgraded. Upgrade ID: The ID number shown on the display is needed when carrying out the procedure. Upgrade Status: Display a list of the additional functions provided by the upgrade.
Contents Connections Playback Settings Information Appendix Reset Perform this procedure if the display is abnormal or if operations cannot be performed. Restores the contents of each setting to the factory settings. Make settings again. o Notification Alerts Sets whether or not to display the notification when the power is turned on. On (Default): Notification messages are displayed. Off: Notification messages are not displayed. Reset factory defaults: Unit is initialized.
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
Contents Connections Playback Settings Tips Appendix Friendly Name Network Control The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. Enables network communication in standby power mode. On (Default): Network is on during standby. Main unit operable with a network compatible controller. Off: Suspend network function during standby. o Friendly Name Selects Friendly Name from the list.
Contents Connections Playback Settings Tips Appendix o Wi-Fi Setup Connection Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. Choose whether to connect the home network to a wireless LAN or a wired LAN. When connecting to the network using wired LAN, select “Wired” after connecting a LAN cable. When connecting to the network using wireless LAN, select “Wi-Fi” and configure the “Wi-Fi Setup”.
Contents Connections Playback Settings n Share Wi-Fi setting from an iOS device Use a WPS-compatible router to connect using the push button method. 1. Select “WPS Router” on the display. 2. Switch to the WPS mode by pressing the WPS button of the router you wish to connect to. 0 The time for pressing the button varies depending on the router. 3. Press ENTER within 2 minutes. 1. Select “Share Wi-Fi setting from an iOS device” on the display. 2.
Contents Connections Playback Settings Tips Appendix n Manual Enter the name (SSID) and password of the network you wish to connect to. 0 The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or tablet that supports wireless LAN connection. 1. Set the following items. SSID: Input the name of the wireless network (SSID). Security: Select the encryption method according to the encryption setting of the access point you are using. Password: Input the password. 1.
Contents Connections Playback Settings Appendix o Subnet Mask Settings When connecting an xDSL modem or connector adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0. Configure the IP address.
Contents Connections Playback Settings Checks whether this unit has access to the Internet (WAN). Used to check the network connection. OK o Physical Connection Error: Checks the physical LAN port connection. OK The LAN cable is not connected. Check the connection. 0 When connected using a wireless LAN, “Connection be displayed. Wireless (Wi-Fi)” will o Router Access Checks the connection from this unit to the router.
Contents Connections Playback Settings Tips Appendix HEOS Account Make HEOS Account-related settings. HEOS Account is needed in order to use HEOS Favorites. The menu displayed differs depending on the status of the HEOS Account. You have not signed in You have already signed in o I have a HEOS Account o Signed in As If you already have a HEOS Account, enter the current account name and password to sign in. The currently signed in HEOS Account is displayed.
Contents Connections Playback Settings o Contents Appendix Troubleshooting Tips I want to listen to high sound performance playback 95 I want to play TV audio at higher quality 95 I want to adjust the tone myself 95 I want sound playback that is faithful to the original sound 95 Simple operations in the power off state 96 I want the volume not to become too loud by mistake 96 I want to operate a Marantz CD player with this unit’s remote control 96 Front panel Tips Rear panel Remote c
Contents Connections Playback Settings Tips Appendix Tips I want to listen to high sound performance playback 0 The network and USB memory playback (USB-A) functions can be stopped to prevent noise that affects the sound quality. Set “Network & USB-A” to “Disabled” in the menu. (v p. 86) 0 The Wi-Fi function can be stopped to prevent noise that affects the sound quality. Set “Disabled” to the “Wi-Fi”. (v p.
Contents Connections Playback Settings Tips Appendix Simple operations in the power off state 0 Press the 1/3 button to simultaneously perform each operation and switch the unit on. 0 When the “Network Control” function is set to “On”, you can perform playback, or other operations through AirPlay or HEOS App. (v p. 87) I want the volume not to become too loud by mistake 0 Set the volume upper limit for “Volume Limit” in the menu beforehand.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? 0 If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem. Continue pressing the X button on the unit until “Restart” appears in the display, or remove and re-insert the power cord of the unit.
Contents Connections Playback Settings Tips Appendix Power does not turn on / Power is turned off Power is not turned on. 0 Check whether the power plug is correctly inserted into the power outlet. (v p. 35) 0 This unit is in standby mode. Press the X button on the unit or the AMP X button on the remote control. (v p. 37) Power automatically turns off. 0 The sleep timer is set. Turn on the power again. (v p. 69) 0 “Auto-Standby” is set.
Contents Connections Playback Settings Tips Appendix Operations cannot be performed through the remote control unit Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. (v p. 7) 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 7) 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix No sound comes out No sound comes out of speakers. 0 Check the connections for all devices. (v p. 23) 0 Insert connection cables all the way in. 0 Check that input connectors and output connectors are not reversely connected. 0 Check cables for damage. 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 24) 0 Securely tighten the speaker terminals.
Contents Connections Playback Settings Tips Appendix Sound is interrupted or noise occurs During playback from the Internet radio or USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. 0 The network communication speed is slow or the radio station is busy. When making a call on mobile phone, noise occurs in audio output on this unit. 0 When making a call, keep a distance of 0.
Contents Connections Playback Settings Tips Appendix When playing a record, the sound is distorted. 0 Adjust to a proper needle pressure. 0 Check the tip of the needle. 0 Replace the cartridge. When playing a record, a humming noise comes out of the speakers. 0 Check that the turntable is connected correctly. (v p. 27) 0 If there is a TV or AV device near the turntable, such devices may affect the playback sound.
Contents Connections Playback Settings Desired sound does not come out The volume does not increase. 0 The maximum volume is set too low. Set the maximum volume using “Volume Limit” on the menu. (v p. 79) Left/right volume balance is unbalanced. 0 Adjust the BALANCE control knob. (v p. 68) No sound is produced from subwoofer. 0 Check the subwoofer connections. (v p. 25) 0 Turn on the subwoofer’s power. The settings of the BASS, TREBLE and BALANCE knobs are not applied.
Contents Connections Playback Settings Tips Appendix AirPlay cannot be played back The AirPlay icon is not displayed on iTunes / iPhone / iPod touch / iPad. 0 This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN). Connect it to the same LAN as this unit. (v p. 32) 0 The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the firmware to the latest version. 0 Set “Network & USB-A” in the menu to “Enabled”.
Contents Connections Playback Settings Tips Appendix USB memory devices cannot be played back USB memory device is not recognized. 0 Disconnect and reconnect the USB memory device. (v p. 31) 0 Mass storage class compatible USB memory devices are supported. 0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to the USB port. 0 The USB memory device must be formatted to FAT32 or NTFS. 0 Not all USB memory devices are guaranteed to work.
Contents Connections Playback Settings Tips Appendix File names on the USB memory device are not displayed properly The file names are not displayed properly (“...”, etc.). 0 Characters that cannot be displayed are used. This is not a malfunction. Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed are replaced with a “. (period)”. Bluetooth cannot be played back Bluetooth devices cannot be connected to this unit.
Contents Connections Playback Settings Tips Appendix The Internet radio cannot be played back A list of broadcasting stations is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. (v p. 32) 0 Perform the network diagnostic mode. Internet Radio cannot be played. 0 The selected radio station is broadcasting in a format that is not supported by this unit. Formats that can be played back in this unit are WMA, MP3 and MPEG-4 AAC. (v p.
Contents Connections Playback Settings Tips Appendix Music files on PC or NAS cannot be played back (Music server) Files stored on a computer cannot be played. 0 Files are stored in a non-compatible format. Record in a compatible format. (v p. 117) 0 Files that are copyright protected cannot be played on this unit. 0 Even if PC is connected to the USB port on this unit, music files on it cannot be played back. Connect PC to this unit through the network. (v p.
Contents Connections Playback Settings Tips Appendix Various online services cannot be played Various online services cannot be played. 0 The online service may have been discontinued. Cannot connect to a wireless LAN network Cannot connect to the network. 0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the network settings according to the setting details of this unit. (v p.
Contents Connections Playback Settings Tips Appendix Cannot connect to a WPS Router. 0 Check that the WPS mode of the router is operating. 0 Press the WPS button on the router and then press the ENTER button within 2 minutes. (v p. 89) 0 A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption time to “None”, WPA-PSK (AES) or WPA2-PSK (AES). 0 If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by using the WPS button on the router.
Contents Connections Playback Settings Tips Appendix Audio from digital devices cannot be played back (Coaxial/Optical) “Signal Unlock” is displayed. 0 When digital audio signals cannot be detected properly, “Signal Unlock” is displayed. (v p. 60) “Unsupported” is displayed. 0 “Unsupported” is displayed when audio signals that are not supported by this unit are input. Check the audio output signal format from your digital device. (v p.
Contents Connections Playback Settings Tips Appendix Update/upgrade error messages If an update/upgrade is interrupted or fails, an error message appears. Display Description Connection failed. Please check your network, then try The network connection is unstable. again. Connection to the server failed. Check your network environment and try the update again. Update failed. Please check your network, then try again. The download of the firmware failed.
Contents Connections Playback Settings Tips Appendix Resetting network settings If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the unit before returning the settings to the default settings. (v p. 97) If the operations are not improved by restarting the unit, follow the steps below. Network settings are reset to the factory default values. Make settings again.
Contents Connections Playback Settings Tips Appendix Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/Apple Lossless/DSD) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly. o Specifications of supported files Sampling frequency 32/44.1/48 kHz 32/44.1/48 kHz 32/44.1/48/88.2/ 96/176.4/192 kHz 32/44.1/48 kHz 44.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Item Number of folder directory levels z1 o Specifications of supported audio formats USB memory device n Coaxial/Optical 8 levels Number of folders 500 Number of filesz2 5000 Linear PCM (2-channel) z1 The limited number includes the root folder. z2 The allowable number of files may differ according to the USB memory device capacity and the file size.
Contents Connections Playback Settings Playing back a Bluetooth device This unit supports the following Bluetooth profile. 0 A2DP (Advanced Audio Distribution Profile): When a Bluetooth device that supports this standard is connected, monaural and stereo sound data can be streamed at a high quality. 0 AVRCP (Audio/Video Remote Control Profile): When a Bluetooth device that supports this standard is connected, the Bluetooth device can be operated from this unit.
Contents Connections Playback Settings Tips Appendix Playing back files stored on a PC and NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3/WAV/FLAC) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly. 0 A server or server software compatible with distribution in the corresponding formats is required to play music files via a network.
Contents Connections Playback Settings Playing back Internet Radio o Playable broadcast station specifications Sampling frequency Bit rate Extension WMA 32/44.1/48 kHz 48 – 192 kbps .wma MP3 32/44.1/48 kHz 32 – 320 kbps .mp3 MPEG-4 AAC 32/44.1/48 kHz 48 – 320 kbps .aac/ .m4a Last function memory This function stores the settings which were made before going into the standby mode.
Contents Connections Playback Settings Tips Appendix Explanation of terms o Audio FLAC (Free Lossless Audio Codec) FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below.
Contents Connections Playback Settings THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Contents Connections Playback Settings Tips Appendix o Network Sampling frequency Sampling involves taking a reading of a sound wave (analog signal) at regular intervals and expressing the height of the wave at each reading in digitized format (producing a digital signal). The number of readings taken in one second is called the “sampling frequency”. The larger the value, the closer the reproduced sound is to the original.
Contents Connections Playback Settings Tips Appendix o Other WPA-PSK/WPA2-PSK (Pre-shared Key) This is a simple authentication system for mutual authentication when a preset character string matches on the wireless LAN access point and client. Source direct Playback with higher fidelity to the source becomes possible, as input audio signals are output by bypassing the audio quality-control circuits (BASS/TREBLE/BALANCE).
Contents Connections Playback Settings Tips Appendix . Trademark information . The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. . Apple, AirPlay, iPad, iPad Air, iPad Pro and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
Contents Connections Playback Settings Tips Specifications o Audio amplifier RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) : 60 W x 2 (8 Ω/ohms load) 80 W x 2 (4 Ω/ohms load) Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) : 0.02 % Frequency response (CD, 1 W, 8 Ω/ohms load) : 5 Hz – 100 kHz ±3 dB Dumping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : 100 and over Input sensitivity/impedance: PHONO (MM): 2.
Contents Connections Playback Settings Tips Appendix o Wireless LAN section Network type (wireless LAN standard): Conforming to IEEE 802.11a/b/g/n (Wi-Fi® compliant) z1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Used frequency range: 2.4 GHz, 5 GHz z1 The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance. o Bluetooth section Communications system: Bluetooth Specification Version 4.
Contents Connections Playback Settings o General Operating temperature: 41 °F - 95 °F (5 °C - 35 °C) Power supply: AC 120 V, 60 Hz Power consumption: 220 W Power consumption in standby modes : 0.4 W (Normal standby (“Auto-Play”-“Off”)) 0.8 W (Optical standby (“Auto-Play”-“On”)) Power consumption in “Network Control” – “On” mode: 4.5 W 0 For purposes of improvement, specifications and design are subject to change without notice.
Contents Connections Playback Settings Tips 8 7/8 (225) 3/4 (18) 2 3/8 (59) 15 (379) 13 (329) 1 7/8 (45) 1 3/8 (32) o Dimensions (Unit : in. (mm)) 2 1/4 (56) 2 (50) 7 1/2 (190) 5 (125) 2 (50) . 13 1/2 (340) 5/8 (14) 4 3/8 (111) 17 3/8 (440) o Weight : 23 lbs 13 oz (10.
Contents Connections Index Settings Front panel ..................................................... 11 AirPlay ............................................................ 62 Auto Standby ................................................. 81 vH vB HEOS Account ......................................... 52, 93 vI vD Rear panel Inputting characters ........................................ 77 Internet Radio ................................................. 39 Remote control unit Menu map ........
Contents Connections vR Playback Settings vU Rear panel ...................................................... 14 Remote control unit ........................................ 17 Resetting network settings ........................... 113 vS USB memory device ................................ 31, 44 vW Wi-Fi settings ................................................. 88 Wired LAN ................................................ 32, 88 Sleep timer .....................................................
Contents Connections Playback Settings Tips Appendix License o License information for the software used in the unit n GPL Open Source Used bridge-utils busybox ebtables Linux kernel mtd-utils ntfs-3g_ntfsprogs ntpclient u-boot wireless-tools About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies.
Contents Connections Playback Settings n LGPL Appendix n e2fsprogs-libs-1.40.8/lib/uuid Open Source Used ffmpeg glibc libmms Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Version 0.8.3 2.9 0.6.2 1. Redistributions of source code must retain the above copyright notice, and the entire permission notice in its entirety, including the disclaimer of warranties. 2.
Contents Connections Playback Settings n expat-2.0.1 Tips Appendix n getopt Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers. http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libc/stdlib/ Copyright (c) 1987, 1993, 1994 The Regents of the University of California. All rights reserved.
Contents Connections Playback Settings n jQuery Appendix n libpcap-1.4.0 Copyright 2014 jQuery Foundation and other contributors http://jquery.
Contents Connections Playback Settings n libtar-1.2.11 Appendix n mDNS 320.10.80 Copyright (c) 1998-2003 University of Illinois Board of Trustees Copyright (c) 1998-2003 Mark D. Roth All rights reserved.
Contents Connections Playback Settings n mongoose Appendix n openssl-1.0.0d https://github.
Contents Connections Playback Settings Tips Appendix n portmap-6.0 THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT "AS IS" AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Contents Connections Playback Settings n pstdint.h-0.1.12 Appendix n rl78flash 2000.3.1 0 BSD License: License ======= The MIT License (MIT) Copyright (c) 2012 Maxim Salov 0 Copyright (c) 2005-2011 Paul Hsieh 0 All rights reserved.
Contents Connections Playback Settings n sqlite 2003.5.7 Appendix n strlcpy.c , v1.11 SQLite Copyright SQLite is in the Public Domain 0 Copyright (c) 1998 Todd C. Miller 0 Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
Contents Connections Playback Settings n tinyxml 2002.4.3 Appendix n Tremor www.sourceforge.net/projects/tinyxml This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. http://wiki.xiph.org/index.php/Tremor Copyright (c) 2002, Xiph.
Contents Connections Playback Settings n zlib http://www.zlib.net/ zlib.h -- interface of the 'zlib' general purpose compression library version 1.2.3, July 18th, 2005 Copyright (C) 1995-2004 Jean-loup Gailly and Mark Adler This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.
. 3520 10703 00AM Copyright © 2019 D&M Holdings Inc. All Rights Reserved.
ENGLISH FRANÇAIS Network Integrated Amplifier ESPAÑOL PM7000N Quick Start Guide Guide de démarrage rapide / Guía de inicio rápido Read Me First.... Lisez-moi en premier.... / Lea esto primero.... Printing Color : Black 1.PM7000NU_ENG_QSG_190808.
Welcome Thank you for choosing a Marantz network integrated amplifier. This guide provides stepby-step instructions for setting up your network integrated amplifier. Please do not return this unit to the store – call for assistance. If you need help… : If you need additional help in solving problems, contact Marantz customer service in your area.
Optional iOS device Router with WPS LAN cable • These drawings are for illustrative purposes only and may not represent the actual product(s). 2 Printing Color : Black 1.PM7000NU_ENG_QSG_190808.
Important: External Antennas The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the PM7000N. nn Connecting the external antennas for Bluetooth / Wireless connectivity For each of the two antennas: q Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel.
Setup There are six steps to the setup process. 1 Installing batteries in the remote control unit 2 Connect the speakers to the amplifier 3 Plug the power cord into a power outlet 4 Connect to the network 1 Installing batteries in the remote control unit Batteries 5 Enjoying your music! 6 Download the HEOS App 4 Printing Color : Black 1.PM7000NU_ENG_QSG_190808.
2 Connect the speakers to the amplifier COAXIAL OPTICAL DIGITAL AUDIO IN PHONO AC IN SIGNAL GND CD AUX RECORDER AUDIO IN w RECORDER SUBWOOFER AUDIO OUT PRE OUT Connecting the speaker cables w q q q Peel off about 3/8 inch (10 mm) of sheathing from the tip of the speaker cable, then either twist the core wire tightly or apply solder to it. w Turn the speaker terminal counterclockwise to loosen it. (R) (L) e Insert the speaker cable’s core wire to all the way into the speaker terminal.
3 Plug the power cord into a power outlet COAXIAL OPTICAL DIGITAL AUDIO IN PHONO AC IN SIGNAL GND CD AUX RECORDER AUDIO IN RECORDER SUBWOOFER AUDIO OUT PRE OUT Connect to household power outlet (AC 120 V, 60 Hz) Power cord (supplied) 6 Printing Color : Black 1.PM7000NU_ENG_QSG_190808.
4 W Connect to the network Choose from one of the following options. Wireless 1 Power on. 2 iOS device iOS version 7 or later Select language. (After selecting a language, please be patient while the network settings initialize. Expect to wait a few minutes.) 3 Make sure your iOS device is connected to your Wi-Fi Network. Select the network named “Marantz PM7000N” from the Settings/Wi-Fi screen on your device. Select Language Select Connection Method English ENTER 1 Power on.
Wired 1 Connect a network cable between your PM7000N and your router. (cable not included) COAXIAL 2 Power on. 3 Select language. 4 Please wait while your PM7000N connects to your wired network. Connected! OPTICAL DIGITAL AUDIO IN PHONO AC IN SIGNAL GND CD AUX RECORDER AUDIO IN 4 RECORDER SUBWOOFER AUDIO OUT PRE OUT ORK NETW Follow the instructions and tap Next. 5 Please wait as completing the connection can take a few minutes.
Auto-Update Setting 1 Turns on Auto-Update so that future updates are automatically downloaded and installed when your PM7000N is in standby mode. Usage Data Setting To help us improve our products and customer service, Marantz collects anonymous information about how you use your PM7000N. Marantz will never provide any information we collect to third parties. Select “On” to turn on Auto-Update. Auto-Update On Feature updates are automatically do... Select “Off” to turn off Auto-Update.
5 Enjoying your music! n Enjoying Internet Radio 1 2 3 Press INTERNET RADIO. Select the station you want to play, then press ENTER. Select “Play Now”, then press ENTER. n Enjoying music using Apple AirPlay 1 2 Open Control Center (iOS 7 and later) by swiping up from the bottom of your screen, then tap AirPlay. 【Example】iOS 12 【Example】iOS 9 Drop: ryone AirPlay Select the “Marantz PM7000N” from the AirPlay Device list. Marantz PM7000N 3 Play the song on your iPhone, iPod touch or iPad.
n Enjoying music using Bluetooth 1 3 Press Bluetooth to select Bluetooth. When using for the first time, the unit will go into the pairing mode automatically and “Bluetooth Pairing Mode” will appear on the display of the unit. 4 Bluetooth Bluetooth Pairing Mode Marantz NA6005 Turn on Bluetooth fr... BACK 2 Select “Marantz PM7000N” from the Bluetooth device list on your mobile device. Bluetooth Marantz PM7000N Play music using any app on your device.
6 Download the HEOS App The HEOS App lets you control your PM7000N from anywhere in your home. Use HEOS to explore, browse, and play music from many online streaming services or from your own music library. Owner’s Manual • For more information, visit www.marantz.com • Refer to the Online Manual for other functions information and operation procedure details. manuals.marantz.com/PM7000N/NA/EN/ Online Manual 12 Printing Color : Black 1.PM7000NU_ENG_QSG_190808.
Printed in Vietnam 5411 11776 00AM Copyright © 2019 D&M Holdings Inc. All Rights Reserved. Printing Color : Black 4. PM7000NU_QSG_BackPage_190808.
Product information PM7000N INTEGRATED STEREO AMPLIFIER WITH HEOS BUILT-IN Discover the PM7000N, the first Marantz fully discrete, current feedback integrated Hi-Fi amplifier with HEOS Built-in technology. The ideal choice for audiophiles, the PM700N includes high-grade audio components, current feedback HDAMs, a toroidal transformer and a high-speed instantaneous current power supply. Stream music wirelessly, or enjoy high-resolution digital audio files up to 24 bits and 192 kHz sampling.
PM7000N INTEGRATED STEREO AMPLIFIER WITH HEOS BUILT-IN FEATURES PM7000N AUDIO SPECIFICATIONS Power Output (8 ohm) 60 W Channels 2 Power Output (4 ohm) 80 W Current Feedback Topology • Frequency Response 5 Hz – 100 kHz ±3 dB Phono EQ OP amp + FET input stage Total Harmonic Distortion (8 ohm, 20 Hz - 20 kHz) 0.02% HDAM version HDAM-SA3, SA2 Damping Factor (8 ohm, 20 Hz - 20 kHz) 100 and over Power Transformer Toroidal Input Sensitivity: MM 2.
For U.S.A. ■na•antz® Limited Warranty Marantz America, Inc. ("Marantz") warrants the following Marantz Products for the periods indicated: 1. The following Marantz Audio/Video components, have a 3 year warranty for both Parts & Labor, from the original purchase date: Amplifiers, Pre Amplifiers, Pre Amplifier-ProcessorTuners, Integrated Amplifiers, Tuners, Receivers, Blu-ray DVD SA-CD/CD Players/Changers, Learning Remote Control Devices, iPod Docks & DLP front Projectors.
For CANADA ■naaeantz® MARANTZ CANADA LIMITED WARRANTY Marantz Canada ("Marantz") warrants the following Marantz products for the periods indicated: Who May Enforce the Warranty 3-year warranty for both Parts & Labour, from the original purchase date : What We Will Pay For Amplifiers; Pre Amplifiers; Pre Amplifier-Processor-Tuners; Integrated Amplifiers; AV Pre Tuner; Tuners; Receivers; AV Surround Receiver; Blu-ray DVD Super Audio CD/CD Players/ Changers; CD Receiver; Turntable; Network Audio Player; D
Safety Instructions marantz . (Read these safety instructions before operating the unit.) 0 SAFETY PRECAUTIONS CAUTIONS ON INSTALLATION CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
CAUTION (FOR AMPLIFIER): HOT SURFACE. DO NOT TOUCH. The top surface over the internal heat sink may become hot when operating this product continuously. Do not touch hot areas, especially around the "Hot surface mark" and the top panel. Hot surface mark PRECAUTION (POUR AMPLIFICATEUR) : SURFACE CHAUDE. NE PAS TOUCHER. La surface superieure du dissipateur de chaleur peut devenir chaude si vous utilisez ce produit en continu.
CAUTIONS ON USING BATTERIES AVISOS SOBRE DE LAS PILAS There is a possibility of smoke, fire, explosion from the battery, Please note as following. • Insert the specified batteries in the remote control un it. • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to the unit. (The supplied batteries are only for verifying operation. Replace them with new batteries at an early date.
Notes on radio USA CANADA IC Information (For Canadian customers) FCC Information (For US customers) 1. COMPLIANCE INFORMATION • Product Name: Network Integrated Amplifier • Model Number: PM7000N • CONTAINS TRANSMITTER MODULE FCC ID: RAX-AIOS4-0S This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 11) this product may not cause harmful interference.
n1a ..antz · CE [ENGLISH) 1. DECLARATION OF CONFORMITY [SVENSKA) 1. 6VERENSSTAMMELSESINTYG Hereby. (D&M Holdings Inc.I declares that our product is in compliance with following EU/EC Directives. The f ull text of t he EU declaration of conformity is available at the following internet address: Harmed f6rsakrar (D&M Hol dings Inc.). alt va r produkt overensstiimmer med direktiv EU/EC. Den fullstand1ga texten till EU-f6rsiikran om 6verensstiimmelse !inns pa f61jande webbadress: 2.
uetoo-- Fi ® CERTIFIED Ct) 01 Ct) 10
