User guide

49
5. Sample Rate
The Sample Rate menu choice allows you to select the sampling
rate 44.1kHz or 48kHz.
1.
From Stop, press and hold the DISPLAY button for 3 seconds.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2 or 3.
Then press the 3/8/ENTER button to accept the selected
Preset.
4.
Press the VOL + or VOL – button to select the Sample Rate
item. Then press the ¢ or 4 button to tab through the
Sample Rate choices (44.1kHz or 48kHz).
5.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.
6. Manual Track
When the Manual Track (Manual Track incrementing) is On during
recording, press the REC button to increment the audio file.
A new audio file is created at that point.
1.
From Stop, press and hold the DISPLAY button for 3 seconds.
2.
Press the VOL + or VOL – button to select Preset Menu. Then
press the 3/8/ENTER button to accept.
3.
Press the VOL + or VOL – button to select Preset 1, 2 or 3.
Then press the 3/8/ENTER button to accept the selected
Preset.
4.
Press the VOL + or VOL – button to select the Manual Track
item. Then press the ¢ or 4 button to tab through the
Manual Track choices (On or Off).
5.
Press the VOL + or VOL – button to select other Menu choices.
When changing the Preset is complete, press the DISPLAY
button to store the changes, or press the STOP/CANCEL
button to exit Menu mode without storing any changes.