Model SR5400 User Guide AV Surround Receiver
ENGLISH NEDERLANDS WARRANTY For warranty information, contact your local Marantz distributor. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz. IMPORTANT When seeking warranty service, it is the responsibility of the consumer to establish proof and date of purchase. Your purchase receipt or invoice is adequate for such proof. FOR U.K.
CE MARKING English The SR5400 is in conformity with the EMC directive and low-voltage directive. Français Le SR5400 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR5400 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte. Nederlands De SR5400 voldoet aan de EMC eisen en de vereisten voor laag-voltage. Español El SR5400 está de acuerdo con las normas EMC y las relacionadas con baja tensión.
FOREWORD FOREWORD ........................................ 1 BASIC OPERATION (PLAY BACK) ... 20 PRECAUTIONS ............................................................. 1 INSTALLATION .............................................................. 1 SELECTING AN INPUT SOURCE. .............................. 20 SELECTING THE SURROUND MODE ....................... 20 ADJUSTING THE MAIN VOLUME .............................. 20 ADJUSTING THE TONE (BASS & TREBLE) CONTROL. ......
ENGLISH INTRODUCTION Thank you for purchasing the Marantz SR5400 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR5400. As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
PO W ER TV NE R1 VC TU R DS S/ CD R VC 2 D AU PE DV TA TV L . VO X SL CDR/M P AM EE D P M D M EN O T TO AU GH OF F I S S ST /E ST P DS O EO ER EM M 6 A/ D SS H 1C 6. BA IN 9 DT H R 3 EX -C M EA CAN /S L NE AN CH P.S U EN M CS 2 5 8 0 U K NI 1 4 7 AIN M O L. V E UT OS T EC IR S-D P/ TU E S E TO N T. PLAY CL P KI E DS ./R SP DI CH AR E /S NE TU OD M CR /V F. RE T.
ENGLISH o FRONT PANEL qw MODE button Press this button to select the auto stereo mode or mono mode when the FM band is selected. The “AUTO” indicator lights in the auto stereo mode. (See page 26) @1 !5 !6 !7 !8 !9 !0 u i o e r t y !1 !2 !0 MUTE button Press this button to mute the output to the speakers. Press it again to return to the previous volume level. AV SURROUND RECEIVER SR5400 SELECTOR VOLUME !1 CLEAR MEMORY VIDEO OFF SELECT TUNING 6.
s d a DISP ¡6 SLEEP g f AUTO AUTO SURR TUNED DIRECT j k ¡0 ¡2 l ¡1 h ST V – OFF DISC 6.1 NIGHT MTX 6.1 PEAK ¡3 ATT ANALOG SURROUND EQ DIGITAL DIGITAL L C R These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will be illuminated. If the digital input signal is 2 channel PCM-audio, “L” and “R” will be displayed. If Dolby Digital 5.
ENGLISH b REAR PANEL z x c v DVD Y GND n m COMPONENT VIDEO ANTENNA FM (75Ω) b CB/ PB DSS/VCR2 CR/ CB/ MONI.OUT CR/ PR Y DVD IN OUT IN RC-5 IN L SL C PB PR Y CB/ PB CR/ PR SERIAL NO. AM AC IN VIDEO TV DVD VCR1 IN DSS/VCR2 OUT IN OUT DIGITAL IN 1 2 3 MONI. OUT VCR1 TV DIGITAL OUT OPT. 4 COAX. OUT TV DVD VCR1 DSS/VCR2 DSS/VCR2 CD TAPE R SR CDR/MD OUT S-VIDEO AC OUTLETS 50HZ 230V PRE UNSWITCHED 100W MAX. SW L SL C R 6.
z FUNCTION AND OPERATION x The provided remote control unit is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components. The input source controlled with the remote control unit changes when one of the input selector buttons is pressed. z x POWER TV VCR1 TUNER ¤4 ¤3 ¤2 DSS/VCR2 CD TV VOL. DVD TAPE CDR/MD AUX AMP SLEEP MUTE OSD MAIN VOL. MENU SETUP/ T.
ENGLISH SCANNING THE CODE TABLE PROGRAMMING THE REMOTE CONTROLLER Important: • Use the remote control buttons for programming, not the buttons of the receiver or other appliances. • Some codes may be not match your equipment. In this case, your equipment cannot be controlled with this remote controller. PROGRAMMING WITH THE 4-DIGIT CODE SETUP/ T.TONE TV VCR1 TUNER CD DSS/VCR2 TAPE DVD S-DIRECT 2 CSII EX/ES 4 5 6 DISPLAY M-CH ST STEREO 6.1CH IN 7 8 9 CLEAR MEMO A/D P.
2. Insert the new batteries (AAA type) with and polarity. correct To control the SR5400 by your RC5400SR, you have to select the device AMP or TUNER by pressing the function selector button. Please refer below for the details in AMP and TUNER mode. REMOTE CONTROL AMP MODE The distance between the transmitter of the remote control and the IR SENSOR of the SR5400 should be less than 5 meters.
ENGLISH THE CONTRABLE FUNCTION TABLE TV POWER CALL UP MENU Cursor OK VCR POWER CALL UP MENU Cursor OK SETUP/T.TONE – – MENU OFF – POWER POWER TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD TV VOL. AUX AMP SLEEP MUTE OSD MAIN VOL. MENU Cursor OK MENU OK SETUP/ T.TONE MENU OFF DTS S-DIRECT AUTO 1 2 3 NIGHT CSII EX/ES DSP 4 5 6 DISPLAY M-CH ST STEREO 7 8 9 CLEAR MEMO A/D P.SCAN 6.1CH IN MODE +/A /ANT –/B /VCR TUNE/SEARCH DISP./RDS F.DIRECT ATT.
SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth pans across the front sound stage as the action moves from side to side.
CONNECTING AUDIO COMPONENTS OUT IN L L R R L R DIGITAL INPUT TAPE DECK CD PLAYER CD RECORDER / MD DECK DIGITAL OUT OUTPUT L L L R R R DIGITAL OUTPUT OUT IN L R L R ANALOG AUDIO R L L R L R COMPONENT VIDEO ANTENNA DVD CB/ Y FM (75Ω) GND L R PB DSS/VCR2 CR/ PR CB/ PB Y MONI.OUT CR/ PR Y CB/ PB CR/ PR SERIAL NO. AC IN TV VCR1 DVD IN DSS/VCR2 OUT IN OUT DIGITAL IN 1 2 TV DVD 3 MONI. OUT VCR1 TV DIGITAL OUT OPT. 4 IN OUT IN RC-5 IN L SL C COAX.
There are 3 types of video jacks on the rear panel. SATELLITE TUNER DVD PLAYER VIDEO PROJECTOR DIGITAL AUDIO VIDEO COMPONENT S-VIDEO VIDEO OUT OUT OUT OUT OUT Y DIGITAL AUDIO VIDEO OUT OUT OUT COMPONENT S-VIDEO VIDEO IN IN C B / P B CR / P R Y S-VIDEO OUT CB / PB CR / PR L R L R L L R R L R DVD Y FM (75Ω) GND CB/ PB DSS/VCR2 CR/ PR Y CB/ PB DVD MONI.OUT CR/ PR Y CB/ PB CR/ Y PR FM (75Ω) AM AC IN VIDEO TV DVD VCR1 IN DSS/VCR2 OUT IN OUT DIGITAL IN MONI.
ENGLISH ADVANCED CONNECTING CONNECTING THE REMOTE CONTROL JACKS COMPONENT VIDEO ANTENNA DVD Y FM (75Ω) GND CB/ PB DSS/VCR2 CR/ PR Y CB/ PB MONI.OUT CR/ PR Y CB/ PB CR/ PR SERIAL NO. AM AC IN VIDEO R L R L TV DVD Y IN OUT MONI. OUT TV DVD IN OUT IN RC-5 IN L SL C OUT S-VIDEO MONI.OUT 1 2 TV DVD 3 DIGITAL OUT OPT. 4 COAX. 2 CB/ PB DSS/VCR2 100W MAX. CR/ PR Y CB/ PB RC OUT MONI.OUT CR/ PR Y CB/ PB CR/ PR SERIAL NO.
AM LOOP ANTENNA FM EXTERNAL ANTENNA FM ANTENNA AM EXTERNAL ANTENNA 1. 2. 3. DVD Y FM (75Ω) GND CB / PB DSS/VCR2 CR / CB / PB MONI.OUT CR / PR PR Y DVD IN OUT IN RC-5 IN L SL C Y CB / PB CR / PR SERIAL NO. AM AC IN VIDEO TV DVD VCR1 IN DSS/VCR2 OUT IN OUT DIGITAL IN 1 2 TV DVD 3 MONI. OUT VCR1 TV DIGITAL OUT OPT. 4 DSS/VCR2 DSS/VCR2 COAX. OUT VCR1 CD TAPE R Press and hold down the lever of the AM antenna terminal.
ENGLISH SETUP 1 2 3 4 5 6 7 After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR5400 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote control or MULTI FUNCTION dial, TUNING / button and ENTER button on the front panel.
Four digital inputs can be assigned to a desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “INPUT SETUP” in SETUP MAIN MENU with or cursor button, and press the OK button. 1 CD T APE CD - R MA I N 2. 3. 4. I NPU T S E T UP : D3 - AT : ANA : D1 - AT TV DVD V CR 1 DS S : ANA : D4 - AT : ANA : D2 - AT EX I T To select the input source, press or cursor buttons. To select the digital input jack , press the or cursor buttons.
ENGLISH 2-2 SPEAKERS DISTANCE Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room. This is important for the timing of the acoustics to create the proper sound space that the SR5400 and today’s sound systems are able to produce.
4 S URROUND S URR . MOD E H T - EQ L FE LEVEL C ENT ER S URR L S URR R S URR B ACK S UB W MA I N 1. 2. : AU TO : : : : : : : OF F 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB EX I T Select “SURROUND” in the SETUP MAIN MENU with the or cursor buttons, and press the OK button. To select a desired content , press the or cursor buttons. SURR.MODE : Select the desired surround mode with the or cursor buttons. HT-EQ : Select to active the HT-EQ with the or cursor buttons.
ENGLISH BASIC OPERATION SELECTING THE SURROUND MODE Example : AUTO SURROUND (PLAY BACK) ADJUSTING THE TONE (BASS & TREBLE) CONTROL. S-DIRECT AUTO 1 2 3 NIGHT CSII EX/ES DSP 4 5 6 DISPLAY M-CH ST STEREO 6.1CH IN 7 8 9 CLEAR MEMO A/D P.SCAN OK AV SURROUND RECEIVER SR5400 AV SURROUND RECEIVER SR5400 SELECTOR SELECTOR SELECTING AN INPUT SOURCE. SETUP/ T.TONE Before you can listen to any input media, you must first select the input source on the SR5400.
TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD TV VOL. AUX AMP SLEEP MUTE OSD The SR5400 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. MAIN VOL. MENU AUTO OK To program the SR5400 for automatic standby, press the SLEEP button on the remote.
ENGLISH MULTI CH. ST S (SOURCE ) - DIRECT This mode is used to create a wider, deeper and more natural soundstage from two channel source material. This is done by feeding the left channel signal to both left front and left surround speaker and the right channel signal to both right front and right surround speaker. Additionally, the center channel reproduces a mix of the right and left channel.
Surround Mode Input Signal Decoding AUTO Dolby Surr. EX Dolby D (5.1ch) Dolby D(2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) PCM(Audio) PCM 96kHz Analog Dolby D Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) PCM (Audio) PCM 96kHz Analog Dolby D Surr. EX Dolby D (5.1ch) DTS-ES DTS(5.1ch) Dolby D Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) PCM (Audio) Analog DTS-ES DTS 96/24 DTS (5.
ENGLISH OTHER FUNCTION ATTENUATION TO ANALOG INPUT SIGNAL TV AUTO ON/OFF FUNCTION BASS This function allows the component connected to the TV-VIDEO in jack to control the power (ON/ OFF) to the SR5400. MODE 3. 4. 5. 2. TUNE/SEARCH +/A /ANT UP DISP./RDS –/B /VCR F.DIRECT ATT. PTY Be sure the TV auto mode is ENABLED. (Refer page 18 : System Setup) Connect your TV TUNER (etc) to the TVVIDEO in terminal. Be sure to connect the VIDEO input. Turn OFF the power to the TV TUNER and the SR5400.
In normal operation, the audio or video source selected for listening through the SR5400 is sent to the record outputs. This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT, CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the record mode. Recording the video from one source and the audio from another You can add the sound from one source to the video of another source to make your own video recordings.
ENGLISH BASIC OPERATION (TUNER) MANUAL TUNING 3. 1. (FM) TUNING MODE (AUTO STEREO OR MONO) 2. 1. 1. TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD 2. VOLUME MODE TV VOL. AUX AMP SLEEP MUTE MAIN VOL. +/A /ANT G F/P DOWN MODE –/B /VCR DISP./RDS F.DIRECT ATT. PTY UP DISC/DECK LISTENING TO THE TUNER R MEMORY TUNING F/P S-DIRECT DOWN MODE CLEAR MEMO A/D MUTE 6.
Note: • When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds. RECALLING A PRESET STATION 2. 1. SETUP/ T.TONE S-DIRECT 1. EIVER SR5400 MENU OFF AUTO 2 CSII EX/ES 4 5 6 DISPLAY M-CH ST STEREO 6.1CH IN CLEAR MEMO NIGHT 7 CLEAR MEMORY TUNING F/P DTS 1 3 DSP 8 9 A/D P.SCAN D MODE 0 VIDEO OFF TV 6.1CH INPUT DVD VCR1 A/D DSS/VCR2 AUX S-DIRECT CD-R TAPE DISPLAY CD TUNER 1.
ENGLISH PTY AUTO SEARCH RDS OPERATION Now in use in many countries, RDS (Radio Data System) is a description of the station’s programming hidden space in the FM signal. Your new receiver is equipped with RDS to assist in the selection of FM stations using station and network names, rather than broadcast frequencies. Additional RDS functions include the ability to search for programme types. Your receiver is equipped to automatically search for stations transmitting any of 29 different programme types.
Can not select EX/ES mode. In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table.
25 mm DIMENSIONS FM TUNER SECTION Frequency Range ................................ 87.5 - 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion .................................... Mono/Stereo 0.2/0.3 % Stereo Separation ....................................... 1 kHz 45 dB Alternate Channel Selectivity ............... ± 300 kHz 60 dB Image Rejection .......................................
SETUP CODES CD Aiwa ............................................ 0151, 0184 Burmester .............................................. 0447 California Audio Labs .................. 0056, 0330 Carver ..................... 0184, 0206, 0326, 0464 DKK ....................................................... 0027 Denon .................................................... 0030 Emerson ............................................... 0332 Fisher .......................................... 0201, 0206 Garrard ...........
JVC ....................................................... 0080 KEC ....................................................... 0207 KTV ............................................. 0057, 0207 Kenwood ..................................... 0046, 0057 LG ......................................................... 0083 LXI ................. 0074, 0081, 0181, 0183, 0205 Logik ...................................................... 0043 Luxman ................................................. 0083 MGA ...............
Shogun .................................................. 0267 Singer .................................................... 0099 Sony ........................ 0027, 0059, 0062, 1059 Sylvania ................... 0027, 0062, 0070, 0108 Symphonic ............................................ 0027 TMK ....................................................... 0267 Teac ...................................................... 0027 Technics ...................................... 0062, 0189 Teknika ......................
www.marantz.com You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.