® Model PV6111W User Guide HD-Ready Rear Projection Television As an ENERGY STAR® Partner, Marantz has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
Contents Setup .................................................. 50 GENERAL INFORMATION IMPORTANT INFORMATION .................................... 3 IMPORTANT SAFEGUARDS .................................... 4 Main Features ........................................................... 6 Supplied Accessories .............................................. 7 Before Operating Your Rear Projection TV ...................... 7 Antenna Connections .............................................. 9 Main Unit ..........
All mentions of “Rear Projection TV” in this OPERATION MANUAL refer to the Marantz HD-Ready Rear Projection Television. IMPORTANT To aid reporting in case of loss or theft, please record the Rear Projection TV model and serial numbers in the space provided. The numbers are located at the rear of the Rear Projection TV. Model No.: Serial No.
NOTICE ON ADVERSE EFFECTS ON THE SCREEN When playing TV games or displaying still pictures with your Rear Projection TV, be sure to keep in mind the following points: Picture Burn Prevention • Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non-moving) patterns can cause permanent damage to projection television receivers. Such “PATTERN BURNS” constitute misuse and are NOT COVERED by your Marantz Factory Warranty.
16. Power Lines—An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 17.
Main Features • SDTV and HDTV compatible SDTV and HDTV broadcasts can be displayed by connecting a commercially available DTV decoder. • DUAL TUNER (TWIN PICTURE screen and SEARCH screen function) Two TV tuners are provided, making it possible to split the screen vertically in two and display moving images simultaneously on them. In addition, the channel search function makes it possible to view other programs on the right side of the screen.
REC VCR/DVD POWER DDFC TITLE STOP PAUSE CH/SKIP VIEW MODE REW PLAY FF INPUT ENT. FLASHBACK TWIN PICTURE CH INPUT ANT-A/B DISPLAY CH MUTE MENU AV MODE ENTER VOL DVD/ CATV D C VCR/ TV DTV STB B A POWER PERSONAL PREFERENCE Supplied Accessories Infrared Remote Control Part Number : RRMCG1704CESA Size AA Dry Batteries (2 pcs.
Before Operating Your Rear Projection TV (Continued) Viewing The main feature of the Rear Projection TV is its large viewing screen. To be able to enjoy this large screen at its best, test the Rear Projection TV by placing it in various different parts of the room, in which it will be set, to find the ideal spot for viewing. It is best viewed by sitting directly in front of the Rear Projection TV and about 10 to 18 feet from the screen.
Antenna Connections • To fully utilize the various features provided, such as the 2-Tuner POP System, UNIVERSAL PLUS, and some connectors for high-quality VCR/DVD playback, set up this unit properly by following the procedures below. Universal Remote Control • The UNIVERSAL REMOTE CONTROL can be compatible with various VCR/DVD player and CATV converter brands by setting the correct control code.
Antenna Connections (Continued) A-2. Connection recommendation if your cable TV converter has AUX terminals. (If your cable TV converter has both RF OUTPUT and AUX terminals, it is recommended to connect them as shown in example A-1.
Antenna Connections (Continued) C.
Antenna Connections (Continued) E. Connection with Antenna Cable 1. Cable without a CATV Converter 2. VHF/UHF Combination Antenna Back of Rear Projection TV Cable TV lead-in ANT/CABLE 75 ANT-A VHF, UHF or VHF/UHF combination antenna 75 ohm coaxial cable (round) or 300 ohm twin-lead (flat) 300-75 ohm ADAPTOR (Not supplied) Home Antenna terminal (75 ohm) OUT ANT-B Coaxial Cable (Not supplied) 3.
Main Unit Front control section POWER Press → On. Press again → Off.
Basic Remote Control Functions This remote control can be used to operate the Rear Projection TV, a VCR, a DTV STB Decoder, a DVD Video Player and a Cable TV converter. The buttons that can be used differ according to the device connected. Please refer to the next page for details. Remote control mode select buttons INFRARED TRANSMITTER WINDOW POWER Use to switch the remote control unit modes.
Basic Remote Control Functions (Continued) • Buttons which can be used with the Rear Projection TV, VCR, CATV, DVD player and DTV STB. Name of button POWER VOLUME-UP VOLUME-DOWN MUTE 0 1 2 3 4 5 6 7 8 9 100/ENT.
EZ SETUP on First Power On When you turn on the Rear Projection TV for the first time, it automatically memorizes the broadcasting channels in your area. Please perform the following steps before you press the POWER button. (1) Insert the batteries into the remote control. (See page 8.) (2) Connect the antenna cable to the Rear Projection TV. (See pages 9 ~ 12.) (3) Plug in the AC POWER cord to the wall outlet.
Menu Functions When you master these basic operations, the rest is simple. POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. PERSONAL PREFERENCE A B C D TIMER/CLOCK TIMER/CLOCK VIDEO AUDIO SCREEN PARENT CTRL CC CH SETUP SETUP SLEEP TIME TV-ON TIME CLOCK SET SELECT NEXT MENU EXIT ENTER AV MODE Press or to move the cursor to the desired function mode. • moves the cursor up. MUTE • VOL CH MENU 2 moves the cursor down.
Menu Functions (Continued) ■ MENU SUMMARY 1. TIMER/CLOCK Using the TIMER/CLOCK mode, you can set the current time and the times for automatically switching on and off the power of the Rear Projection TV. See pages 19 ~ 23. 2. VIDEO You can adjust the settings of VIDEO ADJ. (PICTURE, TINT, COLOR, BRIGHT, SHARP, COLOR TEMP.),PRO ADJ. (VMS, EVC, BLACK, VDE, GAMMA), VIDEO NR and OPC (optical control). See pages 25 ~ 27. 3. AUDIO You can adjust the AUDIO ADJ.
TIMER/CLOCK Using the TIMER/CLOCK mode, you can set the current time and the times for automatically switching on and off the power of the Rear Projection TV. The TIMER/CLOCK mode features the following three types: • CLOCK SET mode ...... Sets the current time. • SLEEP TIME mode ..... Sets the time for switching off the power. • TV-ON TIME mode ..... Sets the time for switching on the power.
TIMER/CLOCK (Continued) ■ AUTO CLOCK SETTING POWER DTV STB VCR/ TV DVD/ CATV PERSONAL PREFERENCE A B C 5 D Use or to select “ON” and then press ENTER to display the XDS CH screen. :CLOCK SET XDS CH AUTO ANT-A ANT-B SELECT ENTER BACK MENU EXIT ENTER VOL CH MENU 6 AV MODE Press or , select “AUTO”, “ANT-A” or “ANT-B” and then press ENTER . :CLOCK SET XDS CH AUTO ANT-A ANT-B SELECT NEXT MUTE BACK MENU INPUT ANT-A/B ENT.
TIMER/CLOCK (Continued) SLEEP TIME POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. PERSONAL PREFERENCE A B C D 2 ENTER VOL Press ENTER or to access the TIMER/CLOCK mode.
TIMER/CLOCK (Continued) TV-ON TIME This function cannot be used if the current time has not been set. (See page 19.) POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. PERSONAL PREFERENCE A B C D 2 ENTER VOL Press ENTER or to access the TIMER/CLOCK mode.
TIMER/CLOCK (Continued) 7 Press or “ON” or “OFF”. to select • ON: Activates the TV-ON TIMER. • OFF: Deactivates the TV-ON TIMER. 8 Press MENU :TV-ON TIME STATUS OFF ON SELECT BACK MENU EXIT to exit. • Be aware that if the time is not set, the TV-ON TIME function cannot be used. Prior Note to accessing the above function, remember to set the current time. • When the STATUS of TV-ON TIME is ON, the VIEW TIMER LED will light up.
Closed Caption How to set Closed Caption • Your Rear Projection TV is equipped with an internal Closed Caption decoder. “Closed Caption” is a system which allows you to view conversations, narration, and sound effects in TV programs and home videos as subtitles on your Rear Projection TV screen. • Not all programs and videos offer closed caption. Please confirm whether the Closed Caption system mark signifies applies to the broadcast program or the video tape you are watching.
Video Adjust Description of Adjustment Items Selected item PICTURE TINT COLOR BRIGHT SHARP COLOR TEMP. button button To decrease contrast To increase contrast To make skin tones purplish To make skin tones greenish To decrease color intensity To increase color intensity To decrease brightness To increase brightness To decrease sharpness To increase sharpness Allows hue adjustment of the entire screen (Low produces the reddest hue while High produces the bluest hue). (LOW-M.L. (Mid Low)-M.H.
Video Adjust (Continued) 6 Press 7 Press MENU to exit. • To set other VIDEO adjustments, repeat steps 4 to 6. Note or to adjust ADJUST “COLOR” and press ENTER COLOR (STD) 3‰ 3 . BACK MENU EXIT • Pressing AV MODE changes the setting applied to the currently viewed image in the following sequence (See page 59.): STD → SOFT → USER → DYNAMIC → STD For example, the “SOFT” setting can be used conveniently with the VCR and the “DYNAMIC” setting can be used with the DVD player.
Video Adjust (Continued) 4 Press or to move the “ ” mark to an item (e.g. “EVC”) you want to adjust, then press ENTER or :PRO ADJ. (DYNAMIC) EVC OFF ON SELECT to access the EVC BACK MENU EXIT mode. 5 Press or to select “ON” or “OFF”, and then press ENTER . 6 Press MENU to exit. • To set other PRO adjustments, repeat steps 4 to 5. VIDEO NR This produces a sharper picture when video images input from the S-VIDEO or VIDEO input terminal appear gritty.
Audio Adjust Description of Adjustment Items Selected item BASS TREBLE BALANCE RESET button To decrease bass response. To decrease treble response. To emphasize the left speaker’s volume. To return all adjustments to the factory preset levels. 1 POWER DTV STB VCR/ TV button To increase bass response. To increase treble response. To emphasize the right speaker’s volume. Press MENU to access MAIN MENU screen and then use or to select “AUDIO”.
Audio Adjust (Continued) Other Audio Settings Q SOUND This function simulates surround sound. EQUISOUND This function keeps the volume level constant during program changes and commercial breaks. Q SOUND EQUISOUND SPEAKER ON ON SP OFF ▼ ▼ OFF ▼ ▼ INTERNAL SPEAKER SWITCH (SPEAKER) This function turns the Rear Projection TV’s internal speakers “ON” or “OFF” when listening to sound from external speakers and using the AUDIO OUTPUT JACKS.
Audio Adjust (Continued) MTS/SAP Select mode ■ Switching MTS mode and displaying the broadcasting mode POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen and then use or to select “AUDIO”. PERSONAL PREFERENCE A B C D 2 ENTER VOL CH Press ENTER or to access the AUDIO mode. MENU TIMER/CLOCK TIMER/CLOCK VIDEO AUDIO SCREEN PARENT CTRL CC CH SETUP SETUP AUDIO AUDIO ADJ. Q SOUND EQUISOUND SPEAKER MTS AUDIO ADJ.
Screen Adjust You can adjust the vertical or horizontal screen size and screen position in this mode. (This mode can be used only when the picture is in LETTERBOX, PANORAMIC, or ANAMORPHIC (vertical only) view mode. (See page 57.) You can adjust the items by following the tables below. Screen adjustment items vary depending on Screen size mode.
Screen Adjust (Continued) POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. PERSONAL PREFERENCE A B C D 2 ENTER VOL Press or to move the cursor to “SCREEN”.
Parent Control (V-CHIP operation) • This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is for preventing your children from watching programs of mature nature. • Restriction of TV programs is based on information about the program’s MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are restricted by age and contents.
Parent Control (V-CHIP operation) (Continued) TV PARENTAL GUIDELINES (example) Example 1.1 : Age-Based setting Go through all select ratings and select unblocked. This will automatically unblock everything. :TV RATINGS TV-Y TV-Y7 FV TV-G TV-PG D L TV-14 D L TV-MA L :BLOCK S S S V V V SELECT NEXT BACK MENU Example 1.2 : Age-Based setting For “TV-G” select “Block”. This will automatically block the higher age ratings “TV-PG”, “TV-14”, “TV-MA” and “TV-G”.
How to Set V-CHIP Parent Control First Setting POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. PERSONAL PREFERENCE A B C D 2 ENTER VOL Press or to move the cursor to “PARENT CTRL”. CH MENU AV MODE TIMER/CLOCK TIMER/CLOCK VIDEO AUDIO SCREEN PARENT CTRL CC CH SETUP SETUP TIMER/CLOCK TIMER/CLOCK VIDEO AUDIO SCREEN PARENT CTRL CC CH SETUP SETUP SLEEP TIME TV-ON TIME CLOCK SET SELECT NEXT MENU V-CHIP VIEW TIMER SECRET No.
How to Set V-CHIP (Continued) MPAA Rating POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. TIMER/CLOCK TIMER/CLOCK VIDEO AUDIO SCREEN PARENT CTRL CC CH SETUP SETUP PERSONAL PREFERENCE A B C D 2 ENTER VOL Press or to move the cursor to “PARENT CTRL”, then press ENTER or to access the CH MENU PARENT CTRL mode. SLEEP TIME TV-ON TIME CLOCK SET SELECT NEXT MENU TIMER/CLOCK TIMER/CLOCK VIDEO AUDIO SCREEN PARENT CTRL CC CH SETUP SETUP V-CHIP VIEW TIMER SECRET No.
How to Set V-CHIP (Continued) TV Rating POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 4 of MPAA Rating on page 36. :V-CHIP MPAA TV RATINGS OTHERS DOWNLOAD STATUS PERSONAL PREFERENCE OFF OFF SELECT NEXT BACK A B C D MENU 2 ENTER VOL Press or to move the “ ” mark to “TV RATINGS”, and then press CH MENU ENTER or .
How to Set V-CHIP (Continued) Additional mode There may be new or additional rating systems in the future. In that case, please set up as follows and the new rating system will be set up automatically. POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 4 of MPAA Rating on page 36 to access V-CHIP select mode. PERSONAL PREFERENCE :V-CHIP MPAA TV RATINGS OTHERS DOWNLOAD STATUS OFF OFF SELECT NEXT BACK A B C D MENU 2 ENTER VOL Press or “DOWNLOAD”.
How to Set V-CHIP (Continued) ■ Additional mode (Example) Before performing the precedure below, download V-CHIP data correctly. (See page 38.) POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 4 of MPAA Rating on page 36. PERSONAL PREFERENCE :V-CHIP MPAA TV RATINGS OTHERS DOWNLOAD STATUS OFF OFF SELECT NEXT BACK A B C D MENU 2 ENTER VOL CH Press or to select “OTHERS”, then press ENTER or .
How to Set V-CHIP (Continued) Turn on V-CHIP Block ■ To operate V-CHIP BLOCK POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 4 of MPAA Rating on page 36. PERSONAL PREFERENCE :V-CHIP MPAA TV RATINGS OTHERS DOWNLOAD STATUS OFF OFF SELECT NEXT BACK A B C D MENU 2 ENTER VOL Press or to move the “ ” mark to “STATUS”.
How to Set V-CHIP (Continued) ■ To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK is activated POWER DTV STB VCR/ TV DVD/ CATV 1 PERSONAL PREFERENCE A B C D Note ENTER VOL “V-CHIP BLOCK IS ACTIVATED” will be displayed if you watch a program with Program Rating data matching those you have configured. 111 ANT AN T-A ID‰1 ID TV-PG DLSV V-CHIP BLOCK IS ACTIVATED • “V-CHIP BLOCK IS ACTIVATED” will not be displayed if STATUS is not configured to “ON” (See page 40.).
How to Set V-CHIP (Continued) ■ To change the V-CHIP BLOCK setting (Secret No. is registered.) POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 2 of MPAA Rating on page 36. • “INPUT SECRET No.” will be displayed. 2 Enter the 4-digit SECRET No. by using DIRECT ACCESS ( • The V-CHIP select mode will be displayed. 3 Repeat the configuration of the V-CHIP BLOCK on the page 40. PERSONAL PREFERENCE A B C D ENTER VOL CH ~ ).
Parent Control (VIEW TIMER) VIEW TIMER This function allows you to restrict Rear Projection TV viewing times and also to control Rear Projection TV usage. This function is for preventing your children from watching too much Rear Projection TV. • It is recommended that the “OFF TIME” function and the “VIEWING TIME” function are both set under the “VIEW TIMER” function. The VIEWING TIME: sets the duration of the viewing time of the Rear Projection TV.
Parent Control (VIEW TIMER) (Continued) POWER DTV STB VCR/ TV DVD/ CATV 8 Press or to move the “ ” mark to “STATUS”. PERSONAL PREFERENCE A B C :VIEW TIMER VIEWING TIME 2H 00M OFF TIME --H --M STATUS OFF SELECT D NEXT BACK MENU EXIT ENTER VOL CH MENU 9 AV MODE MUTE Press ENTER or and then use :VIEW TIMER STATUS OFF ON or to set “STATUS” to “ON” to turn on the VIEW TIMER. SELECT BACK MENU EXIT INPUT ANT-A/B DISPLAY 10 Press MENU to exit. ENT.
Channel Setup If EZ SETUP does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. AIR/CABLE Setting POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. TIMER/CLOCK TIMER/ CLOCK VIDEO AUDIO SCREEN PARENT CTRL CC CH SETUP SETUP PERSONAL PREFERENCE A B C D 2 ENTER VOL Press or to move the cursor to “CH SETUP”.
Channel setup (Continued) Saving Broadcast TV channels to memory (Channel Search) POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 3 of AIR/ CABLE Setting on page 45. PERSONAL PREFERENCE CH SETUP AIR/CABLE CH SEARCH CH MEMORY FAVORITES UNIV.PLUS AIR SELECT NEXT BACK A B C D MENU 2 ENTER VOL Press or to move the “ ” mark to “CH SEARCH”. CH MENU CH SETUP AIR/CABLE CH SEARCH CH MEMORY FAVORITES UNIV.
Channel setup (Continued) Adding Weak or Additional Channels or Erasing Unwanted Channels from TV Memory POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 3 of AIR/CABLE Setting on page 45. PERSONAL PREFERENCE CH SETUP AIR/CABLE CH SEARCH CH MEMORY FAVORITES UNIV.PLUS AIR SELECT NEXT BACK A B C D MENU 2 ENTER VOL Press or to move the “ ” mark to “CH MEMORY”. CH MENU CH SETUP AIR/CABLE CH SEARCH CH MEMORY FAVORITES UNIV.
Channel setup (Continued) FAVORITES FAVORITES allows you to program four favorite channels, in four different categories. (A total of 16 channels) By setting the FAVORITES channels in advance, you can select your favorite channels easily. Press A , B , C or D a number of times until your favorite channel is selected. POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 3 of AIR/CABLE Setting on page 45. PERSONAL PREFERENCE CH SETUP AIR/CABLE CH SEARCH CH MEMORY FAVORITES UNIV.
Channel setup (Continued) UNIVERSAL PLUS Function VCR/DVD input mode will be selected automatically when pressing VCR/DVD player PLAY button on the UNIVERSAL REMOTE CONTROL. (For VCR/DVD player connections, see pages 9 ~ 11) POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 to 3 of AIR/ CABLE Setting on page 45. PERSONAL PREFERENCE CH SETUP AIR/CABLE CH SEARCH CH MEMORY FAVORITES UNIV.PLUS AIR SELECT NEXT BACK A B C D MENU 2 ENTER VOL Press or to move the “ ” mark to “UNIV. PLUS”.
Setup LANGUAGE The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH. POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. PERSONAL PREFERENCE A B C D 2 ENTER VOL Press or cursor to “SETUP”.
Setup (continued) GRAY SCREEN Automatically turns the screen gray if a broadcast signal is not received. POWER DTV STB VCR/ TV DVD/ CATV 1 Press MENU to access MAIN MENU screen. PERSONAL PREFERENCE A B C D 2 ENTER VOL Press or to move the cursor to “SETUP”, and then press CH ENTER or to access the MENU SET UP mode. AV MODE TIMER/CLOCK TIMER/ CLOCK VIDEO AUDIO SCREEN PARENT CTRL CC CH SETUP SETUP SLEEP TIME TV-ON TIME CLOCK SET SETUP LANGUAGE ENGLISH GRAY SCREEN ENERGY SAVE CONVER.
Setup (Continued) ENERGY SAVE This feature lets you lower the power consumption of your Rear Projection TV which in turn saves electricity and minimizes the impact on the environment. When this feature is turned on, it reduces the brightness of the Rear Projection TV to a level that consumes approximately 20 percent less energy than when the feature is turned off. The reduction in brightness will be less noticeable under low room lighting conditions.
Setup (Continued) CONVERGENCE ADJUST Your Rear Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called “convergence”.
Setup (Continued) POWER DTV STB VCR/ TV DVD/ CATV 5 PERSONAL PREFERENCE A B C D Specify the crosshatch which stands out with a comparatively uneven color by using ~ . (e.g. bottom right)*, , press , or to Red move the red cross to match it to the green cross. ENTER VOL * Buttons which corresponds to each crosshatch CH MENU AV MODE MUTE INPUT ANT-A/B DISPLAY Red ENT.
Setup (Continued) INPUT MODE You can select the input signal in INPUT 3 and INPUT 4. The setting items vary in INPUT 3 and INPUT 4. 1 POWER DTV STB VCR/ TV DVD/ CATV Press or to move the “ ” mark to “INPUT MODE”. PERSONAL PREFERENCE A B C Repeat steps 1 and 2 of the ENERGY SAVE setting on page 52. D SETUP LANGUAGE GRAY SCREEN ENERGY SAVE CONVER.ADJ. INPUT MODE INPUT 3 CH/INPUT ID INPUT 4 SELECT NEXT BACK MENU EXIT ENTER VOL CH 2 MENU Press ENTER or to access the INPUT MODE.
Setup (Continued) CH/INPUT ID With the “CH ID” of the CH/INPUT ID function, it is possible to input the names (up to four letters) of channels, for example CNN, NBC. With the “INPUT ID”, it is possible to input names (up to four letters) for each of the input terminals on the Rear Projection TV (for example, VCR, DVD, STB). This function makes it easy to select the source being displayed on the screen. POWER DTV STB VCR/ TV DVD/ CATV 1 Repeat steps 1 and 2 of the ENERGY SAVE setting on page 52.
Changing Screen Size The size of the picture can be adjusted to the following screen sizes. VIEW PERSONAL PREFERENCE A B C D 1 Press MODE . • Each time 4:3 PANORAMIC LETTERBOX ANAMORPHIC VIEW MODE is pressed, the mode changes in the order above. ENTER VOL CH (4:3 image) MENU 4:3: Suitable for viewing news or sitcoms. Video software can be viewed in its original screen frame size. AV MODE MUTE INPUT ANT-A/B DISPLAY ENT.
Selecting DDFC Mode or AV Mode Selecting DDFC Mode POWER DTV STB VCR/ TV DVD/ CATV PERSONAL PREFERENCE A B C D Press 1 DDFC . • You can select the picture quality from three different modes. • Each time DDFC is pressed, the mode changes in the order below. 540P (Progressive) ENTER VOL 540P 1080I (AUTO) 1080I (Interlace) CH MENU 540P This mode is used to display (Progressive) still images or graphics without flickering.
Multi-screen Function View two Screens (TWIN PICTURE Screen) The screen can be split vertically, making it possible to view different images on the left and right. TWIN POWER DTV STB VCR/ TV DVD/ CATV PERSONAL PREFERENCE A B C D 1 VOL CH 12 • Press DIRECT ACCESS ( ~ ) or or to select your desired channel for the Main picture. • Press ENTER Press PICTURE . CH 10 ANT-B ANT-A Main picture Sub-picture to select your desired channel for the Sub-picture.
Multi-screen Function (Continued) Making Notes From the Program Content (Freeze Screen) The screen can be frozen, such as for taking down a recipe from a cooking program or address for entering a contest. POWER DTV STB VCR/ TV DVD/ CATV PERSONAL PREFERENCE A B C D ENTER VOL 1 Press FREEZE . • The freeze function serves as a memo function. By changing a full screen into twin picture mode the left screen is frozen.
Multi-screen Function (Continued) Searching for a Program on a Different Channel (Search Screen) The screen on the right side can be divided into three different screens, making it possible to search for programs or enjoy multiple images. SEARCH POWER DTV STB VCR/ TV DVD/ CATV 1 Press screen. to display 3-SEARCH 6 ANT-A 3 PERSONAL PREFERENCE A B C 2 D 4 ENTER • Each time VOL SEARCH is pressed, the screen mode changes in the following order.
Multi-screen Function (Continued) Interchanging the Left and Right Screens you are Currently Watching (Swap Screen) Use SWAP to interchange the left and right screens you are currently watching. TWIN POWER DTV STB VCR/ TV DVD/ CATV 1 Press PICTURE to use the 12 twin picture display. A picture PERSONAL PREFERENCE A B C 10 ANT-A ANT-B B picture D ENTER SWAP VOL CH MENU 2 Press to interchange the left and right screens.
Operation of the Remote Control for Other Devices ENTER VCR/DVD POWER VOL CH MENU CH/SKIP AV MODE MUTE REW INPUT VCR/DVD POWER Press to turn the VCR/DVD player on and off. VCR CHANNEL, DVD SKIP CHANNEL UP ( ) / DOWN ( ) for VCR, SKIP for DVD player Press to scan up or down through channels on the VCR or SKIP for DVD player. REWIND Press to perform fast reversing with the tape/disc. REW STOP ANT-A/B DISPLAY PLAY ENT.
Operation of the Remote Control for Other Devices (Continued) How to Identify a VCR The remote control may already be set to operate your VCR. Try this initial check to see whether it will be necessary to “identify” your VCR. POWER DTV STB VCR/ TV DVD/ CATV PERSONAL PREFERENCE A B C D VCR/DVD POWER . (1) Point the remote towards the VCR and press (2) Does the remote turn the VCR ON and OFF? • If yes, the remote is ready to operate the VCR and no further steps are needed.
Operation of the Remote Control for Other Devices (Continued) VCR BRAND Akai Audio Dynamics Broksonic Canon Capehart Craig Curtis Mathis Daewoo DBX Dynatech Emerson Fisher Funai GE Goldstar Hitachi Instant Replay JC Penney JVC Kenwood Lloyds Magnavox Magnin Marantz Memorex Minolta Mitsubishi Montgomery Ward REMOTE CONTROL CODE NUMBER 25, 26, 37 15, 22, 30 32 04 34 31 04 34 15, 22, 30 29 21, 32, 35 09, 11 29 04 24 06 04 04, 06, 24, 30 15, 41, 42 15 29 04, 05, 08 31 30 04, 10, 24, 29 06 17, 18, 39, 40 02, 43
Operation of the Remote Control for Other Devices (Continued) How to Identify a DVD Player POWER DTV STB VCR/ TV DVD/ CATV PERSONAL PREFERENCE A B C ■ To Identify Your DVD player –Direct Entry Method Use the following steps and the list below to quickly find the remote control code for your DVD player. • First look up your DVD player’s remote code number on the list below before continuing the direct code entry steps below. DVD/ CATV D (1) Press and the button lights.
Operation of the Remote Control for Other Devices (Continued) How to Identify a DTV STB (Digital TV Set-Top Box) POWER DTV STB VCR/ TV DVD/ CATV PERSONAL PREFERENCE A B C ■ To Identify Your DTV STB –Direct Entry Method Use the following steps and the list below to quickly find the remote control code for your DTV STB. • First look up your DTV STB’s remote code number on the list below before continuing the direct code entry steps below. DTV/ STB D and the button lights.
Operation of the Remote Control for Other Devices (Continued) How to Identify a Cable Converter POWER DTV STB VCR/ TV DVD/ CATV PERSONAL PREFERENCE A B C ■ To Identify Your Cable Converter –Direct Entry Method Use the following steps and list (on page 69) to quickly find the remote control code for your cable TV converter. • First look up your converter’s remote code number on page 69 before continuing the direct code entry steps below. DVD/ CATV D and the button lights.
Operation of the Remote Control for Other Devices (Continued) CATV CONVERTER BRAND Anvision Cable Star Eagle Eastern International General Instrument Hamlin Jerrold Macom Magnavox NSC Oak Oak Sigma Panasonic REMOTE CONTROL CODE NUMBER 07, 08 07, 08 08 02 04, 05, 15, 23, 24, 25, 30, 36 12, 13, 34 04, 05, 15, 23, 24, 25 30, 36 37 07, 08, 19, 25, 28, 29, 32, 33, 40, 41 09 01, 16, 38 18 27, 39 CATV CONVERTER BRAND Philips Pioneer Randtek RCA Regal Regency Scientific Atlanta Sylvania Teknika Texscan Tocom Unik
Using the Video and Audio Input Jacks ■ Connecting video equipment for video playback • When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen on the television screen. Connecting a video device equipped with a video output terminal (Front terminals of Rear Projection TV) IN 2 L-AUDIO-R When noise or distortion appears on TV caused by connecting a video game machine, select the other setting of the DDFC mode (See page 58).
Using the Video and Audio Input Jacks (Continued) ■ Video playback INPUT • Press the remote’s to select the VIDEO INPUT mode to which the video equipment you want to play back is connected. INPUT • The external VIDEO INPUT mode will change as follows each time is pressed.
Using the Audio Output Jacks These jacks are used for connecting a standard studio amplifier. Control of STEREO/MONO/SAP, BASS, TREBLE, BALANCE, VOLUME and MUTE is retained at the Rear Projection TV. These jacks relay the audio signals of all programs being displayed on the Rear Projection TV screen.
Before Calling for Service No Picture or Sound from External Video/Audio Products Remote Control Does not Work Bars On Screen Picture Distorted Picture Rolls Vertically No Color Poor Reception on Some Channels Weak Picture Lines or Streaks in Picture Ghosts in Picture Picture Blurred Sound OK, Picture Poor Picture OK, Sound Poor No Picture or Sound Dark and Blank Picture External Electrical Noise Interfering with TV’s Operation Try a new channel, if OK, then possible station trouble.
Unidad Principal Sección de control delantera POWER (potencia) Pulsar → On. Pulsar de nuevo → Off. POWER POWER VIEW Área sensor para el control remoto Para abrir la cubierta POWER POWER DETRÁS DE LA CUBIERTA MENU Botón MENU (Menú) Pulse el botón MENU (Menú) para acceder a la pantalla del MAIN MENU (Menú Principal) VIEW Entrada AUDIO L/R (I/D) Botón ENTER IN 2 L-AUDIO-R ENTER (Los otros terminales están ubicados en la parte trasera.
Funciones Básicas del Control Remoto Este control remoto puede usarse para operar el televisor de retroproyección, una videograbadora, un decodificador DTV STB, un reproductor de video DVD y un convertidor de cable TV. Los botones que pueden usarse varian de acuerdo al dispositivo conectado. Para los detalles, refiérase a la página siguiente. Ventana del transmisor infrarrojo Pulsar → On. Pulsar de nuevo → Off (Stand-by).
Antes de llamar al Servicio de Reparaciones El equipo de video/audio externo no produce imágen ni sonido El control remoto no funciona Barras en la pantalla Imagen distorsionada La imagen se desplaza verticalmente No hay color Mala recepción de algunos canales Imagen débil Franjas en la imagen Imagen fantasma Imagen borrosa Sonido adecuado, imagen mala Sonido adecuado, sonido malo No hay imagen ni sonido Imagen oscura y en blanco Interferencia de ruido eléctrico externo con el funcionamento d
Unité Principale Commandes avant POWER (Alimentation) Appuyez une fois sur cette touche → Marche Appuyez à nouveau sur cette touche → Arrêt POWER POWER VIEW ZONE DU CAPTEUR DE TELECOMMANDE Pour ouvrir le couvercle POWER POWER Derrière le couvercle Entrée AUDIO L/R (audio gauche/droite) Touche ENTER(Entrée) MENU Touche MENU Appuyez sur cette touche pour accéder à la page de menu principal (MAIN MENU). VIEW IN 2 L-AUDIO-R ENTER (D’autres bornes se trouvent à l’arrière.
Fonctions de Base de la Télécommande Cette télécommande peut être utilisée pour faire fonctionner le téléviseur à rétroprojection, un magnétoscope, un décodeur DTV STB, un lecteur vidéo DVD et un convertisseur de télévision par câble. Les touches utilisables varient selon l’appareil utilisé. Consultez la page suivante pour les détails. CAPTEUR INFRA-ROUGE Touches de sélection de mode de la télécommande POWER (Alimentation) S’utilisent pour commuter entre les modes de fonctionnement de la télécommande.
Avant de faire appel au Service Après-vente Absence d’image et de sons des dispositifs audio/vidéo externes La télécommande ne fonctionne pas Barres sur l’écran Distorsion d’image Défilement vertical de l’image Absence de couleur Mauvaise réception de certaines chaînes Image faible Lignes ou stries sur l’image Fantômes sur l’image Image floue Son normal, mais image défectueuse Image normal, mais son défectueux Absence d’image et de son Image sombre ou vierge Bruits électriques externes gênant
DIMENSIONS FOR INSTALLATION 56.00" (1422) 48.07" (1221) 44.88" (1140) 56.1" (1425) 30.16" (766) 28.89" (734) 13.86" (352) 53.62" (1362) 58.4" (1482) 31.61" (803) 1.89" (48) 0.75" (19) 52.32" (1329) PV6111W DIMENSIONS SHOWN AS INCHES (MM) 80 25.
NOTES 81
NOTES 82
NOTES 83
® Limited Warranty for the Marantz Rear Projection Television Who is covered? You must have proof of purchase to receive warranty service. What is covered? 1) Warranty coverage begins the day you purchase your Rear Projection Television, and contintues for a period of one year. 2) Marantz America will incur all labor charges for repairs during the warranty period. 3) Marantz America will incur all freight charges for warranty repairs, both to Marantz and the return to the customer.
