Multimedia Remote Control User manual,RC5400

User Guide
23
You will do all of your Macro/Jump programming within a screen
that will appear after you press the Macro button on the Mode
menupage. Before proceeding with programming, make sure that
you understand how to move around in the MACRO mode and how
to read the RC5400’s shorthand notation for each macro step (see
page 40).
1 Write a list of all of the actions in the operation you want to
record.
2 Play with all of the example Macro buttons in MACRO device.
Are any of these examples adaptable to your purposes?
3 Use DELETE mode to delete all of the macro devices that you
don’t like (see page 38).
4 Use ADD mode to add a new macro device empty of any
programming from the device list (see page 35-36).
5 Switch to LABEL mode to re-label your macro devices.
(see page 32).
6 Switch to MOVE mode to re-order your macro devices, so that
the most commonly used Macro devices are near the top (see
page 39).
7 Switch to LABEL mode and navigate to the your new macro
device. Relabel the macro buttons with an appropriate name.
The buttons are large so try to imagine a descriptive name even
if it requires a few words.
8 Switch to MACRO mode. Tap the Macro to button to
proceed.
Note If you like to create a macro to the Device button, tap the
Macro to device button instead of the Macro to button
button.
Customizing Your RC5400
6. Programming Macros & Page Jumps