Model SR4001/SR5001 User Guide AV Surround Receiver
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
12. Grounding or Polarization – This product may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 16.
INTRODUCTION .....................................1 PRECAUTIONS.......................................1 DESCRIPTION ........................................2 FEATURES ..............................................3 ACCESSORIES.......................................3 FRONT PANEL........................................4 SR4001.................................................................................4 SR5001.................................................................................4 FL DISPLAY....
ENGLISH DESCRIPTION DTS was introduced in 1994 to provide 5.1 channels of discrete digital audio into home theater systems. DTS brings you premium quality discrete multichannel digital sound to both movies and music. DTS is a multichannel sound system designed to create full range digital sound reproduction. The no compromise DTS digital process sets the standard of quality for cinema sound by delivering an exact copy of the studio master recordings to neighborhood and home theaters.
P AIT STER CT TUAL 6 EO GHT IN 4 P.S CA SURR BAN D 4 NI H 1C 7. A/D ENGLISH ON IRE 3 VIR s dt ST 5 9 +10 A/B OFF Y P.D S /E EX 0 AT E UT M AT I/C ULT M LIP INP SYNC UT OU ND / T.M OD E N HT-EQ ME MO E UM LL VO M-S PKR TE PLA 2 II H -C M L /C CH D EN ME R SS CS SEND SET P EE SL 8 SPKR OS T.T SETUONE P/ BA NU T.D ISP PRES ET PTY + IT SC EX DI F.D L V-O SUBT FF IRE TUNIN GLE AN CH-SE CT G BA ITL SS DV E ATT.
ENGLISH q FRONT PANEL When this switch is pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated. SR4001 qw e r ty u i o !0 !1 !2 !3 w VOLUME DOWN SURROUND MODE 7.
ATT (Attenuate) button If the selected analog audio input signal is greater than the capable level of internal processing, the PEAK indicator will illuminate. If this happens, you should press the ATT button. “ATT” is displayed when this function is activated. The signal-input level is reduced by about half. Attenuation will not work with the output signal of “REC OUT” (TAPE, CD-R/MD, VCR1 and VCR2 output). This function is memorized for each input function.
¡4 ENGLISH FL DISPLAY s a DISP ¡8 SLEEP f g d MULTI h AUTO AUTO SURR TUNED DIRECT j ST V – OFF DISC 6.1 k ¡0 ¡2 ¡4 l ¡1 ¡3 NIGHT MT X 6.1 PEAK SPKR B ANALOG input indicator HOW TO ATTACH THE FRONT AUX JACK COVER This indicator is illuminated when an analog input source has been selected.
These are the video inputs and outputs. There are 4 video inputs and 2 video outputs and each one includes both composite video and S-video configurations. Connect VCRs, DVD players, and other video components to the video inputs. The 2 video output channels can be used to be connected to video tape recorders for making recordings. The input signals of video and S-video are converted each other, and each of the converted video signals can be output.
ENGLISH !0 Subwoofer Output Connect this jack to the line level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input. If you are using two subwoofers, either powered or with a 2 channel subwoofer amplifier, connect a “Y” connector to the subwoofer output jack and run one cable from it to each subwoofer amplifier. !1 7.
z Indicates when the remote controller is in the LEARN mode. x FUNCTION AND OPERATION The provided remote control unit is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components. The input source controlled with the remote control unit changes when one of the input selector buttons is pressed. ‹5 LEARN indicator SET button This button is used to enter learn mode and preset mode.
ENGLISH ¤1 BAND/LIP SYNC/INPUT button ¤6 ‹2 AUDIO buttons (When TUNER mode is selected) Used to select a radio band. (When DVD mode is selected) Used to select one of the audio language. (When AMP mode is selected) Used to select LIP SYNC mode. Note: Set the AMP mode to use this button with the SR4001/ SR5001. ‹3 (When TV mode is selected) Used to select monitor input. ¤7 ¤2 T.MODE button (When TUNER mode is selected) Used to select auto stereo mode or mono mode when the FM band is selected.
REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR4001/SR5001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible. LOADING BATTERIES CAUTIONS ON BATTERIES The life of the batteries used with the remote control is about 4 months with normal use.
ENGLISH GENERAL INFORMATION OF RC5001SR TO SR4001/SR5001 To control the SR4001/SR5001 by your RC5001SR, you have to select the device AMP or TUNER by pressing the SOURCE button. Please refer below for the details in AMP and TUNER mode. AMP MODE TUNER MODE LEARN SOURCE SEND SET OFF ON DISPLAY P.DIRECT SURROUND l/ SLEEP AUTO LIP SYNC/ INPUT dts 1 2 3 BAND EX/ES VIRTUAL T.MODE 5 6 STEREO NIGHT CS 4 M-CH ST 7 8 9 7.
1. 2. Press the desired SOURCE button. Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide. • It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) LEARN SOURCE SEND SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT l/ SLEEP AUTO 1 CS 2 3 BAND EX/ES VIRTUAL T.MODE 4 5 6 M-CH ST STEREO NIGHT 7 CH/ CAT P.SCAN 8 9 7.
ENGLISH CONTROLLING A MARANTZ CD RECORDER (CDR MODE) LEARN SOURCE SEND SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT l/ SLEEP AUTO 1 2 3 BAND EX/ES VIRTUAL T.MODE 5 6 STEREO NIGHT CS 4 M-CH ST 7 9 A/D HT-EQ 0 +10 MEMO SPKR A/B MUTE MULTI/ CAT M-SPKR CL CH/ CAT P.SCAN 8 7.
NORMAL MODE (When operating Marantz AV equipment products) This remote control is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD, CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifier). Learning is not necessary for Marantz products. You can use these products without setting any codes. Importants: • Some codes may be not match your equipment.
ENGLISH LEARN MODE 4. This remote control is capable of learning and storing codes used by other remote controls that you already own. For codes which are not learned, the remote control will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer. The receiver sensor for the remote control signals is located at the top of the remote control. 1.
SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back left and right speakers, and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth pans across the front sound stage as the action moves from side to side.
Note: Be sure to connect the positive and negative cables for the speaker properly. If they are miss-connected, the signal phase will be reversed and the signal quality will be corrupted.
There are 3 types of video jacks on the rear panel. DVD player DIGITAL OUT COMPONENT VIDEO OUT S-VIDEO VIDEO OUT OUT AUDIO OUT Satellite Tuner VIDEO PROJECTOR Y Y CB / PB CR / PR S-VIDEO OUT S-VIDEO jack The video signal is separated into luminance (Y) and color (C) signals for the S-VIDEO jack. The S-VIDEO signals enables high-quality color reproduction. If your video component has an S-VIDEO output, we recommend to use it.
ENGLISH ADVANCED CONNECTING CONNECTING THE REMOTE CONTROL JACKS INPUT 1 INPUT 3 COMPONENT VIDEO MONITOR OUT 2 DVD VCR IN VCR OUT DSS/VCR2 MONITOR OUT INPUT 2 CB/PB Y CR/PR Y CB/PB 3 CR/PR CB/PB Y 4 COAX INPUT 1 CR/PR IN 2 RC OUT IN R L R L R L R L DVD R L OUT VCR1 IN DSS/VCR2 IN CD OUT TAPE 1 IN OUT CDR/MD 2 DIGITAL IN 3 OPT DIGITAL OUT OUT RC-5 FLASHER DC IN TRIGER OPTION AUDIO R L R L R L R L L R L R L R L VIDEO CENTER FM (75Ω) L CENTER S-VIDEO GND
AM Loop Antenna FM External Antenna Connecting the supplied FM antenna The supplied FM antenna is for indoor use only. During use, extend the antenna and move it in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion. If you experience poor reception quality, an outdoor antenna may improve the quality.
ENGLISH XM RADIO OVERVIEW (SR5001 only) SR5001 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the XM Connectand-PlayTM or Possport system (sold separately) and subscribing the XM service. Introducing XM Satellite Radio There’s a world of audio listening pleasure beyond AM and FM.
Bi-wire Connection A bi-wire connection is possible with speakers that have two sets of inputs (for treble and bass). This allows you to drive the treble and bass units with separate channel amps, which enables better sound quality. Connect the speakers as shown in the figure. Set the SPEAKER C selector switch on the rear panel to ON.
ENGLISH HDMI JACK This unit has two HDMI inputs and one HDMI output. It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. Select an input source from the OSD menu system. (See page 26) Notes: • When the HDMI output is connected to a display monitor that does not support HDCP, signals are not output.
After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR4001/SR5001 incorporates an on-screen menu system, which makes various operations possible by using the cursor (3, 4, 1, 2) and ENTER buttons on the remote control or on the front panel. Note: To view the on-screen displays, make certain you have made a connection from the Monitor Out jack on the rear panel to the composite, S-Video, component video input of your TV or projector. (see page 19) 1.
ENGLISH 1 INPUT SETUP (ASSIGNABLE DIGITAL INPUT AND COMPONENT VIDEO INPUT) 4 digital inputs and 2 component video inputs can be assigned to a desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “INPUT SETUP” in SETUP MAIN MENU with 3 or 4 cursor button, and press the ENTER button.
Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room. This is important for the timing of the acoustics to create the proper sound space that the SR4001/ SR5001 and today’s sound systems are able to produce.
ENGLISH VIDEO CONVERT: Select the VIDEO CONVERT function to enable or disable with the 1 or 2 cursor buttons. (Video cable connection: Refer to page 19) 3-1 VIDEO CONVERT TV DVD VCR1 DSS AUX1 : : : : : ON ON ON ON ON Notes: • REMOTE is available for the external control. The RC5001SR cannot operate this function. • To select desired input source , press 3 or 4 cursor button. • To set ON or OFF, press 1 or 2 cursor button.
This sub-menu is to adjust the speaker levels for 7.1channel input sources. Here you will adjust the volume for each channel so that they are all heard by the listener at the same level. 8 MULTI ROOM (SR5001 only) SR5001 has features in MULTI ROOM SYSTEM such as source selector, sleep timer, Multi Room Speaker output and remote control. You can set these feature in this sub-menu. 8 MULTI ROOM 7 7.1 CH. INPUT LEVEL VIDEO-IN : LAST FRONT L : 0 dB CENTER : 0 dB FRONT R : 0 dB SURR.R : 0 dB SURR.
ENGLISH The relation of the speakers number and conectted speaker SIMPLE SETUP You can setup the speaker conditions quickly with SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “2. SPEAKER” setup menu. Press the SIMPLE SETUP button on the unit to enter this menu. 1. 2. 4. 3. 5.
(PLAYBACK) SELECTING AN INPUT SOURCE Before you can listen to any input media, you must first select the input source on the SR4001/SR5001. Example : DVD DISC+ ANGLE SUB TITLE CH-SEL V-OFF ATT. DVD VCR BASS TV AUDIO TREBLE DSS TUNER CD CDR MD TAPE AUX1 AUX2 AMP REMOTE CONTROLLER RC5001SR To select DVD, turn the INPUT SOURCE knob on the front panel or simply press the DVD button on the remote. After you have selected DVD, simply turn on the DVD player and play the DVD.
ENGLISH SELECTING THE SURROUND MODE ADJUSTING THE TONE (BASS & TREBLE) CONTROL USING THE SLEEP TIMER Example: AUTO SURROUND SOURCE SET OFF ON DISPLAY P.DIRECT SURROUND dts LIP SYNC/ INPUT PRESET + - TUNING + LEARN SEND l/ AV SURROUND RECEIVER SR5001 INPUT SELECTOR SLEEP DISC+ ANGLE SUB TITLE CH-SEL V-OFF ATT. AUDIO SOURCE AUTO 1 SURROUND MODE MULTI SPEAKER MULTI PURE DIRECT SIMPLE SETUP CS 4 STANDBY AUTO POWER ON/STANDBY HT-EQ 3 VIRTUAL 5 6 BASS T.
The SR4001/SR5001 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, Dolby Digital Surround EX, DTS, DTS-ES, DTS 96/24 or PCM-audio.
ENGLISH CSII-Mono mode This mode plays back monaural recordings from any source, including CDs, DVDs and TV and radio broadcasts in compelling 6.1-channel surround. Notes: • CS II mode is available for 2ch input signals which are encoded in Dolby Digital or PCM format. • PCM-audio signals can be subjected to Pro Logic processing when the sampling frequency is 32 kHz, 44.1 kHz or 48 kHz.
Surround Mode Input Signal Decoding AUTO Dolby Surr. EX Dolby D (5.1ch) Dolby D(2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) PCM(Audio) PCM 96kHz HDCD Analog Dolby D Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) PCM (Audio) PCM 96kHz HDCD Analog Dolby D Surr. EX Dolby D (5.1ch) DTS-ES DTS(5.1ch) Dolby D Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) PCM (Audio) Analog DTS-ES DTS 96/24 DTS (5.
ENGLISH OTHER FUNCTION ATTENUATION TO ANALOG INPUT SIGNAL REC TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the SR4001/SR5001. AUTO POWER ON 1. Be sure the TV auto mode is ENABLED. (Refer page 27 : System Setup) 2. Connect your TV TUNER (etc) to the TVVIDEO in terminal. Be sure to connect the VIDEO input. 3. Turn OFF the power to the TV TUNER and the SR4001/SR5001. 4.
TV DVD VCR DSS TUNER CD CDR MD TAPE AUX1 AUX2 AMP REMOTE CONTROLLER RC5001SR 4 5 6 M-CH ST STEREO NIGHT 7 8 9 CL CH/ CAT P.SCAN 7.1CH IN A/D HT-EQ 0 +10 MEMO SPKR A/B MUTE MULTI/ CAT M-SPKR 1. RECORDING AN ANALOG SOURCE In normal operation, the audio or video source selected for listening through the SR4001/SR5001 is sent to the record outputs.
ENGLISH 1. Select a desired Video source to decide the routed video signal to the Monitor Outputs. 2. Press the 7.1 CH INPUT button on the front panel or press 7.1 CH IN on the remote to switch the 7.1 channel input. 3. If it is necessary to adjust the output level of each channel, press the CH.SEL button on the remote. AUX2 INPUT If you don’t need to connect 7.1 Ch. input terminals with multi channel decoder, L(front left) and R (front right) inputs terminals are available as AUX2 input.
SOURCE SET OFF ON DISPLAY P.DIRECT SURROUND l/ VOLUME SLEEP AUTO DOWN UP 1 2 3 EX/ES VIRTUAL 4 5 6 M-CH ST STEREO NIGHT CS DISPLAY MEMORY CLEAR MUTE ATT ENTER EXIT BAND T-MODE DIGITAL AUX 1 INPUT S-VIDEO VIDEO L AUDIO R dts 7 CL CH/ CAT 8 9 7.1CH IN A/D 0 +10 SPKR A/B MUTE LIP SYNC/ INPUT T.MODE MANUAL PRESET MEMORY PRESET MEMORY With this unit you can preset up to 50 FM/AM stations in any order.
ENGLISH CLEARING STORED PRESET STATIONS SORTING PRESET STATIONS You can remove preset stations from the memory using the following procedure. 2. 3. AUTO 1 CS VOLUME 2. DOWN MEMORY CLEAR EXIT BAND T-MODE MUTE DIGITAL AUX 1 INPUT S-VIDEO VIDEO VIRTUAL 5 6 STEREO NIGHT 7 3. INFO 1. EX/ES 4 CH/ CAT DISPLAY 3 M-CH ST CL ENTER dts 2 8 9 7.1CH IN A/D 0 +10 AV SURROUND RECEIVER SR5001 INPUT SELECTOR VOLUME LIP SYNC/ INPUT T.
SELECTING AN INPUT SOURCE ENTER T.TONE /SET UP Before you can listen to XM Satellite Radio, you must first select the input source on the SR5001. SOURCE 1. SET OFF DISPLAY REC T.DISP PTY SURROUND dts LIP SYNC/ INPUT PRESET DISC+ AUTO 1 + 3 BAND VIRTUAL T.MODE 5 6 M-CH ST STEREO NIGHT CS 7 SURROUND MODE MULTI SPEAKER MULTI 8 - TUNING + 2. AUTO T.TONE /SET UP BASS V-OFF A/D HT-EQ 0 +10 MEMO DISC+ ANGLE SUB TITLE AUDIO V-OFF ATT. T.
ENGLISH When the channel Artist name/Song title is displayed: 2. When you press the INFO button, the following information will be displayed. N A M E / T I T L E VIDEO AUDIO P i n k F l o i d F l o i d / / Note: The front Panel display can indicate up to 13 alphanumeric characters at once. If the information contains more then 13 characters, the information scrolls from right to left. When this display appears, press the INFO button again. XM information like the following will appear.
7. You can select the desired channel from the category allocated to each channel. Category being aired can be only selected. 1. 2. 3. 4. 0 +10 SPKR A/B MUTE MULTI/ CAT M-SPKR CL CH/ CAT MEMO VOLUME EIVER SR5001 INFO SURROUND MODE PURE DIRECT SIMPLE SETUP DISPLAY MEMORY - HT-EQ MENU EXIT BAND PRESET + - TUNING Note: Category search automatically ends 5 minutes after the last operation.
CHECKING THE XM PRESET CHANNEL ENGLISH PRESET MEMORY You can store the desired channel in the Preset Memory. In addition to AM and FM, it is possible to preset 50 XM channels. 3. SOURCE 2.4. SET OFF CH/ CAT DISPLAY P.DIRECT AUTO dts 1 CS 2 3 EX/ES VIRTUAL CLEARING STORED PRESET STATIONS CS EX/ES 4 5 6 STEREO NIGHT 7 8 MUTE A/D 0 +10 P.SCAN HT-EQ MEMO M-SPKR CH/ CAT You can remove preset stations from the memory using the following procedure. T.MODE 9 7.
ENGLISH TROUBLESHOOTING If a problem should arise, first check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? 3. Are the speakers and other components operating properIy? If this unit is not operating properly, Check the items listed in the table beIow. Should the problem persist, there may be a malfuncation. Disconnect the power immediately and contact your store of purchase. SYMPTOM CAUSE REMEDY “ANTENNA” is displayed.
ENGLISH MULTI ROOM SYSTEM (SR5001 only) The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR5001 is located. To use this function, a multi room remote unit and remote control signal receiver available from your Marantz dealer are necessary. The operations possible with the multi room function are explained briefly below.
(SR4001 only) The Surround Speaker B system is a function which allows you to listen to the same source in a room other than the room in which the SR4001 is located. The operations possible with the Surround speaker function are explained briefly below. Notes for SURROUND SPEAKER B • SURROUND SPEAKER B On/ Off is available in main room only. • SURROUND SPEAKER B output terminals can be used when the SURROUND BACK SPEAKER is set NONE in SPEAKER SETUP menu. (See SPEAKER SETUP, page 26) • “The Surr.
ENGLISH TROUBLESHOOTING SYMPTOM Can not select EX/ES mode. In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table.
after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to operate the equipment Memory backup • In case a power outage occurs or the power cord is accidentally unplugged, the SR4001/ SR5001 is equipped with a backup function to prevent memory data such as the preset memory from being erased. HOW TO RESET THE UNIT Specifications subject to change without prior notice. AM TUNER SECTION Frequency Range ...................................
SETUP CODES TV Acer .......................................................... 1141 Admiral .................................1002, 1009, 1089 Aiko .......................................................... 1059 Aiwa.................................................1117, 1118 Akai .......................................................... 1001 Amtron ...................................................... 1023 Anam ........................................................ 1113 Anam National.....................
Dimensia ..............................3004, 3063, 3085 Dixon ..............................................3077, 3081 Dynatech .................................................. 3035 Electrohome ............................................. 3052 Electrophonic ........................................... 3052 Emerson .................... 3009, 3015, 3016, 3017 3018, 3019, 3022, 3035 3047, 3052, 3054, 3073 Fisher .............................................3029, 3032 Fuji.....................................
Hughes ...........................................4001, 4016 Janeil ........................................................ 4025 JVC........................................................... 4017 Mitsubishi ................................................. 4001 Panasonic ......................................4004, 4010 Philips .............................................4031, 4035 Proscan ......................4002, 4008, 4009, 4011 Radio Shack ...................................4036, 4037 RCA ..........
www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark.