Model SR5400 User Guide AV Surround Receiver
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1.
12. Grounding or Polarization – This product may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 16.
INTRODUCTION .................................. 2 PRECAUTIONS ................................... 2 DESCRIPTION ..................................... 2 FEATURES .......................................... 3 ACCESSORIES ................................... 3 FRONT PANEL .................................... 4 FL DISPLAY ................................................................... 5 REAR PANEL ...................................... 6 REMOTE CONTROL OPERATION ..... 7 FUNCTION AND OPERATION ...............
ENGLISH INTRODUCTION Thank you for purchasing the Marantz SR5400 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR5400. As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
PO W ER TV NE R1 VC TU R R2 VC S/ DS CD DV P TA TV L. VO E D AU X SL CDR/M P AM EE D P D U EN M OF I F CS S S P EO DS ER O EM ST M 6 A/ D H 1C 6. SS BA IN 9 DT /E ST 3 EX R H -C M EA CH P.S U EN M K O TO T 2 5 8 0 AU 1 4 7 AIN M OL. V E UT M OS T EC IR S-D P/ TU E SE TON T. GH NI PLAY CL IP SK L/ NE AN CAN E OD DS ./R SP DI H RC EA /S NE TU M CR /V F. RE T.
ENGLISH !1 FRONT PANEL qw @1 !5 !6 !7 !8 !9 !0 u i o e r t y !1 !2 AV SURROUND RECEIVER SR5400 SELECTOR VOLUME CLEAR MEMORY VIDEO OFF SELECT TUNING 6.1CH INPUT F/P A/D DOWN MODE S-DIRECT UP MUTE TV DVD VCR1 DSS/VCR2 AUX CD-R TAPE CD ATT (Attenuate) button If the selected analog audio input signal is greater than the capable level of internal processing, the PEAK indicator will illuminate. If this happens, you should press the ATT button.
s d a DISP ¡6 SLEEP g f AUTO AUTO SURR TUNED DIRECT j k ¡0 ¡2 l ¡1 h ST V – OFF DISC 6.1 NIGHT MTX 6.1 PEAK ATT EQ ¡3 ANALOG SURROUND DIGITAL DIGITAL L C R These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will be illuminated. If the digital input signal is 2 channel PCM-audio, “L” and “R” will be displayed. If Dolby Digital 5.
ENGLISH b REAR PANEL z x c v b n m n DVD Y FM (75Ω) GND CB/ PB DSS/VCR2 CR/ PR Y DVD IN PB MONI.OUT CR/ PR Y CB/ PB CR/ PR SERIAL NO. DVD VCR1 IN DSS/VCR2 OUT IN OUT MONI. OUT VCR1 TV DSS/VCR2 OUT IN OUT DIGITAL IN MONI.OUT DIGITAL OUT RC-5 IN L SL C SWITCHED UNSWITCHED 1A 120W MAX 1A 120W MAX AC OUTLETS 120V 60HZ PRE 2 TV DVD 3 OPT. 4 COAX. OUT OUT VCR1 DSS/VCR2 CD TAPE R SR CDR/MD SB SW L SL C R 6.
z FUNCTION AND OPERATION x The provided remote control unit is a universal remote controller. The POWER button, numeric buttons and control buttons are used in common across different input source components. The input source controlled with the remote control unit changes when one of the input selector buttons is pressed. z x POWER TV VCR1 TUNER ¤4 ¤3 ¤2 DSS/VCR2 CD TV VOL. DVD TAPE CDR/MD AUX AMP SLEEP MUTE OSD MAIN VOL. MENU SETUP/ T.
ENGLISH SCANNING THE CODE TABLE PROGRAMMING THE REMOTE CONTROLLER Important: • Use the remote control buttons for programming, not the buttons of the receiver or other appliances. • Some codes may be not match your equipment. In this case, your equipment cannot be controlled with this remote controller. PROGRAMMING WITH THE 4-DIGIT CODE SETUP/ T.TONE 1. TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD TUNER CD AUX 2. TV VOL. SLEEP DSS/VCR2 TAPE DVD CDR/MD AMP MAIN VOL. MUTE OSD 2. 6. 3.
2. Insert the new batteries (AAA type) with correct and polarity. REMOTE CONTROL AMP MODE The distance between the transmitter of the remote control and the IR SENSOR of the SR5400 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible.
ENGLISH THE CONTRABLE FUNCTION TABLE POWER POWER TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD TV VOL. AUX AMP SLEEP MUTE OSD MAIN VOL. MENU Cursor OK SETUP/ T.TONE SETUP/T.TONE MENU OFF DTS S-DIRECT AUTO 1 2 3 NIGHT CSII EX/ES DSP 4 5 6 DISPLAY M-CH ST STEREO 7 8 9 CLEAR MEMO A/D P.SCAN 6.1CH IN MENU OFF 0-9 0 CHANNEL/SKIP TREBLE MODE +/A /ANT VCR POWER CALL UP MENU Cursor OK MENU OK BASS TV POWER CALL UP MENU Cursor OK –/B /VCR TUNE/SEARCH DISP./RDS F.
SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth pans across the front sound stage as the action moves from side to side.
CONNECTING AUDIO COMPONENTS OUT IN L L R R L R DIGITAL INPUT TAPE DECK CD PLAYER CD RECORDER / MD DECK DIGITAL OUT OUTPUT L L L R R R DIGITAL OUTPUT OUT IN L R L R ANALOG AUDIO R L L R L R COMPONENT VIDEO ANTENNA DVD CB/ Y FM (75Ω) GND L R PB DSS/VCR2 CR/ PR CB/ Y PB MONI.OUT CR/ PR Y CB/ PB CR/ PR SERIAL NO. AC IN TV VCR1 DVD IN DSS/VCR2 OUT IN OUT DIGITAL IN 1 2 TV DVD 3 MONI. OUT VCR1 TV DIGITAL OUT OPT.
There are 3 types of video jacks on the rear panel. SATELLITE TUNER DVD PLAYER VIDEO PROJECTOR DIGITAL AUDIO VIDEO COMPONENT S-VIDEO VIDEO OUT OUT OUT OUT OUT Y DIGITAL AUDIO VIDEO OUT OUT OUT COMPONENT S-VIDEO VIDEO IN IN CB / PB CR / PR Y S-VIDEO OUT CB / PB CR / PR L R L R L L R R L R DVD Y FM (75Ω) GND CB/ PB DSS/VCR2 CR/ PR Y DVD MONI.OUT CR/ PR Y CB/ PB Y CR/ PR FM (75Ω) AM VIDEO TV CB/ PB DVD VCR1 IN DSS/VCR2 OUT IN OUT DIGITAL IN MONI.
ENGLISH ADVANCED CONNECTING CONNECTING THE REMOTE CONTROL JACKS COMPONENT VIDEO ANTENNA DVD Y FM (75Ω) GND CB/ PB DSS/VCR2 CR/ PR Y CB/ PB MONI.OUT CR/ PR Y CB/ PB CR/ PR SERIAL NO. AM AC IN VIDEO R L R L TV IN R L DVD AUDIO PLAYER or SACD MULTI CHANNEL PLAYER CB/ OUT IN OUT MONI. OUT VCR1 TV DSS/VCR2 DVD IN OUT IN RC-5 IN L SL C OUT S-VIDEO MONI.OUT R L DIGITAL IN DVD Y GND DSS/VCR2 1 2 TV DVD 3 DIGITAL OUT OPT. 4 COAX.
AM LOOP ANTENNA FM EXTERNAL ANTENNA FM FEEDER ANTENNA DVD Y FM (75Ω) GND CB / PB AC IN DSS/VCR2 CR / PR Y CB / PB MONI.OUT C R/ PR C B/ PB Y CR / PR SERIAL NO. AM VIDEO TV AM EXTERNAL ANTENNA COMPONENT VIDEO ANTENNA VCR1 DVD IN DSS/VCR2 OUT IN OUT DIGITAL IN MONI. OUT VCR1 TV DIGITAL OUT S-VIDEO DSS/VCR2 DVD IN OUT IN RC-5 IN L SL C OUT MONI.
ENGLISH SETUP 1 2 3 4 5 6 7 After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR5400 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( , , , ) and OK buttons on the remote control or MULTI FUNCTION dial, TUNING / button and ENTER button on the front panel.
Four digital inputs can be assigned to a desired source. Use this menu to select the digital input jack to be assigned to the input source. 1. Select “INPUT SETUP” in SETUP MAIN MENU with or cursor button, and press the OK button. 1 CD T APE CD - R MA I N 2. 3. 4. I NPU T S E T UP : D3 - AT : ANA : D1 - AT TV DVD V CR 1 DS S : ANA : D4 - AT : ANA : D2 - AT EX I T To select the input source, press or cursor buttons. To select the digital input jack , press the or cursor buttons.
ENGLISH 2-2 SPEAKERS DISTANCE Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances. Begin by determining the ideal or most commonly used seating position in the room. This is important for the timing of the acoustics to create the proper sound space that the SR5400 and today’s sound systems are able to produce.
4 S URROUND S URR . MOD E H T - EQ L FE LEVEL C ENT ER S URR L S URR R S URR B ACK S UB W MA I N 1. 2. : AU TO : : : : : : : OF F 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB EX I T Select “SURROUND” in the SETUP MAIN MENU with the or cursor buttons, and press the OK button. To select a desired content , press the or cursor buttons. SURR.MODE : Select the desired surround mode with the or cursor buttons. HT-EQ : Select to active the HT-EQ with the or cursor buttons.
ENGLISH BASIC OPERATION SELECTING THE SURROUND MODE (PLAY BACK) Example : AUTO SURROUND ADJUSTING THE TONE (BASS & TREBLE) CONTROL. S-DIRECT AUTO 1 2 3 NIGHT CSII EX/ES DSP 4 5 6 DISPLAY M-CH ST STEREO 6.1CH IN CLEAR MEMO OK AV SURROUND RECEIVER SR5400 AV SURROUND RECEIVER SR5400 SELECTOR SELECTOR SELECTING AN INPUT SOURCE. SETUP/ T.TONE Before you can listen to any input media, you must first select the input source on the SR5400.
TV VCR1 DSS/VCR2 DVD TUNER CD TAPE CDR/MD TV VOL. AUX AMP SLEEP MUTE OSD The SR5400 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. MAIN VOL. MENU AUTO OK To program the SR5400 for automatic standby, press the SLEEP button on the remote.
ENGLISH MULTI CH. ST S (SOURCE ) - DIRECT This mode is used to create a wider, deeper and more natural soundstage from two channel source material. This is done by feeding the left channel signal to both left front and left surround speaker and the right channel signal to both right front and right surround speaker. Additionally, the center channel reproduces a mix of the right and left channel.
Surround Mode Input Signal Decoding AUTO Dolby Surr. EX Dolby D (5.1ch) Dolby D(2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) PCM(Audio) PCM 96kHz Analog Dolby D Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) PCM (Audio) PCM 96kHz Analog Dolby D Surr. EX Dolby D (5.1ch) DTS-ES DTS(5.1ch) Dolby D Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) PCM (Audio) Analog DTS-ES DTS 96/24 DTS (5.
ENGLISH OTHER FUNCTION ATTENUATION TO ANALOG INPUT SIGNAL TV AUTO ON/OFF FUNCTION BASS This function allows the component connected to the TV-VIDEO in jack to control the power (ON/ OFF) to the SR5400. MODE 3. 4. 5. 2. +/A /ANT UP DISP./RDS –/B /VCR F.DIRECT ATT. PTY Be sure the TV auto mode is ENABLED. (Refer page 18 : System Setup) Connect your TV TUNER (etc) to the TVVIDEO in terminal. Be sure to connect the VIDEO input. Turn OFF the power to the TV TUNER and the SR5400.
In normal operation, the audio or video source selected for listening through the SR5400 is sent to the record outputs. This means that any program you are watching or listening to may be recorded simply by placing machines connected to the outputs for TAPE OUT, CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT in the record mode. Recording the video from one source and the audio from another You can add the sound from one source to the video of another source to make your own video recordings.
ENGLISH BASIC OPERATION (TUNER) MANUAL TUNING 3. 1. (FM) TUNING MODE (AUTO STEREO OR MONO) TV 2. 1. 1. VCR1 DSS/VCR2 DVD CD TAPE CDR/MD TUNER 2. VOLUME MODE TV VOL. AUX AMP SLEEP MUTE MAIN VOL. +/A /ANT G F/P DOWN MODE –/B /VCR DISP./RDS F.DIRECT ATT. PTY UP DISC/DECK LISTENING TO THE TUNER R MEMORY TUNING F/P S-DIRECT DOWN MODE CLEAR MEMO A/D P.SCAN MUTE ATT SYSTEM REMOTE CONTROLLER 0 FF 6.
Note: • When entering a single digit number (2 for example), either input “02” or just input “2” and wait for a few seconds. RECALLING A PRESET STATION 2. 1. SETUP/ T.TONE S-DIRECT 1. EIVER SR5400 CLEAR MEMORY TUNING F/P MENU OFF AUTO DTS 1 2 3 CSII EX/ES DSP 4 5 DISPLAY M-CH ST STEREO 7 8 9 CLEAR MEMO A/D P.SCAN NIGHT 6 6.1CH IN D MODE 0 VIDEO OFF TV 6.1CH INPUT DVD VCR1 A/D DSS/VCR2 AUX S-DIRECT CD-R TAPE DISPLAY CD TUNER 1.
ENGLISH SYMPTOM TROUBLESHOOTING Can not select EX/ES mode. In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table.
Memory backup • In case a power outage occurs or the power cord is accidentally unplugged, the SR5400 is equipped with a backup function to prevent memory data such as the preset memory from being erased. ENGLISH ENGLISH DIMENSIONS 1 in. 25 mm TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................ 87.5 - 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion ...............
SETUP CODES CD Aiwa ............................................ 0151, 0184 Burmester .............................................. 0447 California Audio Labs .................. 0056, 0330 Carver ..................... 0184, 0206, 0326, 0464 DKK ....................................................... 0027 Denon .................................................... 0030 Emerson ............................................... 0332 Fisher .......................................... 0201, 0206 Garrard ...........
JVC ....................................................... 0080 KEC ....................................................... 0207 KTV ............................................. 0057, 0207 Kenwood ..................................... 0046, 0057 LG ......................................................... 0083 LXI ................. 0074, 0081, 0181, 0183, 0205 Logik ...................................................... 0043 Luxman ................................................. 0083 MGA ...............
Shogun .................................................. 0267 Singer .................................................... 0099 Sony ........................ 0027, 0059, 0062, 1059 Sylvania ................... 0027, 0062, 0070, 0108 Symphonic ............................................ 0027 TMK ....................................................... 0267 Teac ...................................................... 0027 Technics ...................................... 0062, 0189 Teknika ......................
www.marantz.com You can find your nearest authorized distributor or dealer on our website. JAPAN Marantz Japan, Inc. 35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works.
