Model SR7001/SR8001 User Guide AV Surround Receiver
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
12. Grounding or Polarization – This product may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 16.
ENGLISH TABLE OF CONTENTS INTRODUCTION ....................................2 6 ACOUSTIC EQ ............................................................38 PRECAUTIONS ......................................2 BASIC OPERATION (PLAY BACK).....40 DESCRIPTION .......................................2 SELECTING AN INPUT SOURCE ...................................40 OUT TERMINALS.............................................................56 SELECTING THE SURROUND MODE...........................
ENGLISH INTRODUCTION PRECAUTIONS Thank you for purchasing the Marantz SR7001 Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR7001. As there are a number of connection and configuration options, you are encouraged to discuss your own particular home theater setup with your Marantz A/V specialist dealer.
Neo:6 offers several important improvements as follow, • Neo:6 provides up to six full-band channels of matrix decoding from stereo matrix material. Users with 6.1 and 5.1 systems will derive six and five separate channels, respectively, corresponding to the standard home-theater speaker layouts. • Neo:6 technology allows various sound elements within a channel or channels to be steered separately, and in a way which follows naturally from the original presentation.
ENGLISH Dolby Virtual Speaker is a technologycertified by Dolby Laboratories that creates a virtualized surround sound experience from two speakers using a multichannel Dolby Digital source. Additionally, Dolby Virtual Speaker can simulate the surround sound effect produced by Dolby Pro Logic or Dolby Pro Logic II. Dolby Virtual Speaker retains all the original Multichannel audio information and provides the listener with the sensation of being surrounded by additional speakers.
The SR7001 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II (Movie, Music and Game), Dolby ProLogic IIx (Movie, Music and Game), Circle Surround II (Cinema, Music and Mono). In addition, Marantz has focused on the future. By utilizing pre-out jacks, 7.
ENGLISH u FRONT PANEL q w e r ty u io!0 !1 !2 !3 !4 AV SURROUND RECEIVER SR8001 READY i BAND button Press this button to switch between FM, AM and XM (XM Ready) in the TUNER mode. VOLUME INPUT SELECTOR PURE DIRECT DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST SPKR A B DISC 6.1 V-OFF MTX 6.1 PEAK NIGHT ATT ANALOG EQ DIGITAL o SURROUND DIGITAL L AAC C R LFE PCM SL DSD S SR DOWN SURROUND MODE PURE DIRECT UP MULTI AUTO MULTI SPEAKER BAND 7.
SPEAKER A/B button Press this button to select speaker systems A and/or B. s Opening and closing the front panel door When you want to use the controls behind the front panel door, open the door by gently pressing on the lower part of the panel. Keep the door closed when not using these controls. f a d DISP MULTI SLEEP h g AUTO TUNED AUTO SURR DIRECT k ¡0 ¡1 ¡3 ¡2 l j ST V – OFF DISC 6.1 NIGHT MT X 6.
ENGLISH y REAR PANEL q e w r tyu i INPUT 2(DVD) INPUT 1(TV) OUT PUT 1 SPEAKER SYSTEMS SURROUND BACK MODEL NO.
REMOTE CONT. IN/OUT terminals Connect to a Marantz component equipped with remote control (RC-5) terminals. @1 AUDIO IN/OUT (TV, DVD, VCR1, DSS/VCR2, TAPE, CD/CDR) REMOTE CONTROLLER RC8001SR NAMES AND FUNCTIONS These are the analog audio inputs and outputs. There are 6 audio inputs (4 of which are linked to video inputs) and 4 audio outputs (2 of which are linked to video outputs). The audio jacks are nominally labeled for cassette tape decks, compact disc players, DVD players and etc....
ENGLISH (7) DISP. button Selects the display mode for the front display of the SR7001. (8) OSD button When this button is pressed, the current setting are displayed on the TV monitor. (9) SLEEP (sleep timer) button This button is used for setting the sleep timer. It can be operated the same way as the button in unit. ⁄7 MENU button (when AMP mode is selected) This button is used to call up the SETUP MAIN MENU of the SR7001.
Close the cover until it clicks. The distance between the transmitter of the remote control and the IR SENSOR of the SR7001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible. BATTERY REPLACEMENT INTERVAL Under normal usage, alkaline batteries last approximately four months. When the batteries wear out, a battery mark is displayed on the LCD.
ENGLISH CHECKING THE TIME AMP MODE To check the time, hold down the > button for three seconds or more. The current time is displayed for five seconds. POWER OFF Note: • Although the remote control uses a quartz clock, the time may become out of sync over the course of operation. Be sure to correct the clock from time to time. ON/OFF ON SOURCE M D1 D1 D2 SOURCE ON/OFF POWER ON POWER OFF D1 - D5 / >(Page) VOL +/MUTE Cursor OK SURR (3) 7.
SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back left and right speakers, and a subwoofer. For best results we recommend that all front speakers be of the same type, with identical or similar driver units. This will deliver smooth pans across the front sound stage as the action moves from side to side.
CONNECTING AUDIO COMPONENTS Tape Deck CD recorder / MD deck OUT IN OUT IN L L R R L R DIGITAL INPUT DIGITAL OUTPUT L R R L R L R L R L R Analog Audio R L INPUT 2(DVD) INPUT 1(TV) OUT PUT 1 Note: • Be sure to connect the positive and negative cables for the speaker properly. If they are miss-connected, the signal phase will be reversed and the signal quality will be corrupted.
This SR7001 has four HDMI inputs and one HDMI output (The SR8001 has two HDMI outputs.). It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. The SR7001 is also capable of converting analog video signals (Composite Video, S-Video, Component Video) for HDMI output. Select an input source from the OSD menu system.
ENGLISH VIDEO, S-VIDEO, COMPONENT JACKS CONNECTING VIDEO COMPONENTS There are 3 types of video jacks on the rear panel. DVD player DIGITAL AUDIO OUT OUT COMPONENT VIDEO OUT VIDEO OUT Y COMPONENT VIDEO IN S-VIDEO OUT CB / PB CR / PR Y CB / PB CR / PR S-VIDEO IN VIDEO PROJECTOR VIDEO jack The video signal for the VIDEO jacks is the conventional composite video signal.
CONNECTING THE REMOTE CONTROL JACKS INPUT 1(TV) ENGLISH ADVANCED CONNECTING INPUT 2(DVD) OU PU 1 FM (75Ω) R L GND AM ANTENNA R L R L INPUT 2(DVD) CB/ Y COMPONENT VIDEO INPUT 1(TV) CR/ PR PB Y INPUT 3(VCR1) CB/ PB CR/ PR Y CB/ PB CR / PR INPUT 4(DSS/VCR2) INPUT 3(VCR1) INPUT 4(DSS/VCR2) OUTPUT 1 OU PU 2 OUTPUT 2 HDMI Ver1.
ENGLISH CONNECTING THE SUPPLIED ANTENNAS CONNECTING THE ANTENNA TERMINALS FM Antenna AM Loop Antenna FM External Antenna INPUT 1(TV) Connecting the supplied FM antenna The supplied FM antenna is for indoor use only. During use, extend the antenna and move it in various directions until the clearest signal is received. Fix it with push pins or similar implements in the position that will cause the least amount of distortion.
SR7001 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to the XM Connectand-PlayTM or Passport system (sold separately) and subscribing the XM service. Introducing XM Satellite Radio There’s a world of audio listening pleasure beyond AM and FM.
ENGLISH CONNECTING FOR SPEAKER C USE CONNECTING FOR THE MULTI ROOM (Multi room speaker) RIGHT SPEAKER INPUT 1(TV) LEFT SPEAKER Notes: • If incorrectly connected, a protective circuit in the receiver will trip and set the receiver to standby. (The STANDBY indicator will flash.) In such case, recheck the connections between the speakers and the receiver. • Turn power to the receiver off before changing the setting of the SPEAKER C selector switch.
ENGLISH CONNECTING OTHER EQUIPMENT a INPUT 1(TV) INPUT 2(DVD) OUT PUT 1 MODEL NO. SR8001 SURROUND BACK L RS-232C MPONENT VIDEO CB/ PB Y CR / PR INPUT 3(VCR1) Y CB/ PB CR/ PR Y CB/ PB C R/ PR INPUT 4(DSS/VCR2) INPUT 3(VCR1) INPUT 4(DSS/VCR2) OUTPUT 1 OUT PUT 2 R OUTPUT 2 HDMI Ver1.2 L XM S/VCR2(4) MONITOR OUT MULTI OUT TV(1) DVD(2) VCR1(3) DSS/VCR2(4) AC IN MONI. OUT R IN OUT RC-5 MULTI RC IN AX.
ENGLISH SETUP RC8001SR BUTTON CONTROL After all components are connected, initial setup must be performed. CH UP button VOL ONSCREEN DISPLAY MENU SYSTEM The SR7001 incorporates an onscreen menu system, which makes various operations possible by using the cursor (3, 4, 1 , 2) and OK/ENTER buttons on the remote control unit or on the front panel.
ENGLISH Note: • After you complete this portion of the setup, move cursor to “RETURN” with the 3, 4, 1 and 2 cursor buttons and press the OK/ENTER button. MAIN MENU MAIN MENU 1.INPUT SETUP 2.SPKR SETUP 3.SURR SETUP 4.VIDEO SETUP 5.PREFERENCE 6.ACOUSTIC EQ RETURN LOCKED UNLOCK NEXT EXIT SUB MENU 1.INPUT FUNC SETUP INPUT 7.1CH SETUP INPUT FUNCTION 3.SURR SETUP 5.
ENGLISH 1.INPUT 1 INPUT SETUP FUNC This menu is for setting the matching the output of connected audio devices and the input jacks of this receiver. 7.1CH • FUNC RENAME : “1-3 FUNCTION RENAME” (see page 26) 1. Select “1. INPUT SETUP” from the MAIN MENU with 3 or 4 cursor button, and press the OK/ENTER button. 1.INPUT FUNC 7.1CH INPUT INPUT FUNCTION RETURN ☞ P.
The 6 and F (Front) digital inputs can be assigned to a desired source. HDMI and COMPONENT inputs can be assigned to the preferred source. Use this menu to select which digital input jacks are to be assigned to which input source. 1. Select “FUNC INPUT SETUP” from the 1.INPUT SETUP menu with the 3 or 4 cursor buttons and press the OK/ENTER button. FUNC INPUT SETUP 1 F U N C : M O D E DIG HDMI COMP V/S TV :AUTO DVD :AUTO VCR1 :AUTO DSS :AUTO AUX1 :AUTO RETURN 2.
ENGLISH 1-3 FUNCTION RENAME 9. Input sources can be registered under any name. This menu is for renaming input source. This menu is for renaming function name. Names can be up to 10 characters long, including spaces. (Characters are selected from those appearing on the display.) This name appears on the receiver's FL display and the OSD, but it does not appear in the OSD Setup menu. 1. Select “FUNCTION RENAME” from the 1. INPUT SETUP menu with the 3 or 4 cursor buttons and press the OK/ENTER button.
After you have installed the SR7001 connected all the components and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.
ENGLISH • Use a stand or tripod to position the microphone at ear height in the listening position. • Remove any obstructions between the speakers and microphone. • To use the internal subwoofer of the amp, set the volume to the middle point and set the crossover frequency to the highest. • During measurement, step away from the microphone and operate the SR7001 via the remote control unit from a position that is out of the path of the speaker sound.
8. Move the microphone to the second listening position, select “START” with the 3/4 cursor buttons and press the OK/ENTER button to measure the second point. At this point, you can cancel second point measurement and calculate measurement results by selecting “CALCULATE” and pressing the OK/ENTER button. AUTO SPEAKERS 2ND SETUP CHECK:OK When calculations for the measurement results end, a screen appears for confirming the calculation results.
ENGLISH ERROR MESSAGES Displayed Error Cause MIC SET ERROR!! AUTO AUTO SETUP: START 2CH MIC SET AUTO SETUP SPEAKERS • The speakers required for suitable playback were not detected. • Speaker polarity is connected backwards. • Check the speaker that is indicated as having reversed polarity ([REV] can appear with some speakers even when properly connected. In such case, ignore the error indication.
1. Select “2. SPKR SETUP” from the MAIN MENU. 2. Select “MANUAL SETUP” with the 3 or 4 cursor buttons. 3. Press the OK/ENTER button to enter the selection. SPEAKER THX SPKR SUB W FRONT CENTER SURR. SURR.B SURR.B SIZE LPF/HPF BASS MIX RETURN SIZE : NO : YES : SMALL : SMALL : SMALL : 2CH : SMALL : 80Hz : NEXT EXIT When setting the speaker size in the SPEAKER SIZE menu, use the guidelines below.
ENGLISH SUB W: Set the distance from the subwoofer to your normal listening position. SURR. B L: Set the distance from the surround back left speaker to your normal listening position. SURR. B R: Set the distance from the surround back right speaker to your normal listening position. Notes: • Set the distance to each speaker in meters (m) or feet (ft) as follows. m: 0.03 - 9.15 m in 0.03 m steps ft: 0.1 - 30.0 ft in 0.1 ft steps (The values appearing on the FL display are approximate.
This menu is for setting surround effect parameters for the various surround input signals so as to bring out the live audio effect of your speaker system. • CHANNEL LEVEL: “3-1 CHANNEL LEVEL” (see page 33) • PLIIx MUSIC PARAMETER: “3-2 PLIIx MUSIC PARAMETER” (see page 34) • CSII PARAMETER: “3-3 CSII PARAMETER” (see page 34) • NEO:6 PARAMETER: “3-4 NEO:6 PARAMETER” (see page 34) 1. 2. Select “3. SURR SETUP” from the MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button.
ENGLISH SUB W LEVEL: Set the effect level of the subwoofer speaker between –18 and +12 level in 0.5 level interval . • If “NONE” was selected for the subwoofer speaker setting in the SPEAKER SIZE, then this setting will not appear. Note: • Setting to a mode other than multichannel stereo or CSII will affect the speaker level as explained in “2-2 MANUAL SETUP”.
Video settings are made as follows. 1. Select “4. VIDEO SETUP” from the MAIN MENU with the 3/4 cursor buttons and press the OK/ENTER button. 4.VIDEO VIDEO CONVERT TV.AUTO OSD INFO I/P CONVERT HDMI OUT COMPO OUT2 RETURN 2. SETUP :DISABLE :ENABLE :ENABLE :OUTPUT1 :MAIN NEXT EXIT • COMPONENT OUT (This feature is not available on the SR7001.) This setting is for selecting whether to output the images for the main room or the images for the multi room system to the COMPONENT MONITOR OUT 2 terminal.
ENGLISH 5.PREFERENCE 5 PREFERENCE MULTI ROOM DC TRIGGER • MULTI ROOM SETUP : “5-1 MULTI ROOM SETUP” (see page 37) • DC TRIGGER SETUP : “5-2 DC TRIGGER SETUP” (see page 37) 1. STANDBY : BILINGUAL : HDMI AUDIO: RETURN Select “5. PREFERENCE” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button. 5.
The SR8001 has source selectors, sleep timers and multispeaker output remote control units (Room A only) for the two other rooms in the multi room system. (The SR7001 has only one other room in the multi-room system.) These features can be set from this menu. 1. 2. 3. Select “5. PREFERENCE” from the MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button. Select “MULTI ROOM SETUP” with the 3 or 4 cursor buttons and select either “Room A” or “Room B” with the 1 or 2 cursor buttons.
ENGLISH 3. 6 ACOUSTIC EQ This display is for setting up the equalizer and changing the Equalizer mode. • PRESET G. EQ ADJ : “6-1 PRESET G. EQ ADJ” (see page 39) • CHECK AUTO 1 & 2 : “6-2 CHECK AUTO” (see page 39) EQ MODE: There are 4 equalizer modes to choose from: PRESET G. EQ that allows the user to manually adjust the equalizer, and AUDYSSEY, FRONT and FLAT that automatically adjust the equalizer from the measurement results of the AUTO SETUP feature (see page 28).
6-2 CHECK AUTO These modes allow you to set a 9-band graphic equalizer for each of the 7 channels. These menus are for confirming the results of AUTO SETUP function equalizer measurement (AUDYSSEY, FRONT, FLAT). 1. Select “6. ACOUSTIC EQ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button. 2. 3. 1. Select “6. ACOUSTIC EQ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK/ENTER button. Select “PRESET G. EQ ADJ” with the 3 or 4 cursor buttons. 2.
ENGLISH BASIC OPERATION ADJUSTING THE MAIN VOLUME SELECTING THE SURROUND MODE ADJUSTING THE TONE (BASS & TREBLE) CONTROL Example: AUTO SURROUND (PLAY BACK) READY CH VOLUME VOL M M EAK ATT ANALOG GHT EQ DIGITAL SURROUND L AAC C R LFE PCM SL SELECTING AN INPUT SOURCE D1 DIGITAL S SR D1 DOWN UP D2 OK D2 BAND Before you can listen to any input media, you must first select the input source on the SR7001.
ANALOG VIDEO CONVERSION CONNECTION EXAMPLE • When a monitor is connected to the HDMI MONITOR OUT terminal of the SR7001 • When a monitor is connected to the COMPONENT VIDEO MONITOR OUT terminal of the SR7001 TEMPORARILY TURNING OFF THE SOUND ENGLISH VIDEO CONVERT AV SURROUND RECEIVER SR8001 READY INPUT SELECTOR VOLUME PURE DIRECT DSD DOWN The SR7001 is equipped to convert video signals for monitor output.
ENGLISH SURROUND MODE SURROUND The SR7001/SR8001 is equipped with many surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played. The available surround modes may be restricted depending on the input signal and speaker setup. SOURCE DIRECT In the Source Direct mode, the tone control circuit Acoustic EQ. and bass management configuration are bypassed for full-range frequency response and the purist audio reproduction.
This mode provides 6.1 channel surround for Dolby Digital EX, and DTS-ES-encoded source material such as DVD. This mode cannot be used when an analog input has been selected. Dolby Digital EX In a movie theater, film soundtracks that have been encoded with Dolby Digital Surround EX technology are able to reproduce an extra channel which has been added during the mixing of the program.
ENGLISH The relationship between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on the SR7001 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and the input signal. That relationship is as follows: Surround Mode Input Signal Decoding AUTO Dolby Surr.EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.
Input Signal Decoding Dolby Virtual Speaker Dolby Surr.EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) Multi Ch-PCM SA-CD (5.1ch) SA-CD (2ch) PCM (Audio) HDCD Analog Dolby Surr.EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) Multi Ch-PCM Multi Ch-PCM 96kHz SA-CD (5.1ch) SA-CD (2ch) PCM (Audio) HDCD Analog Dolby Surr.EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) DTS-ES DTS 96/24 DTS (5.1ch) Multi Ch-PCM SA-CD (5.
ENGLISH OTHER FUNCTION TV AUTO ON/OFF FUNCTION ATTENUATION TO ANALOG INPUT SIGNAL MUTE GUIDE EXIT TEST CH.SEL 1 2 3 7.1CH ATT SPK-AB 4 5 6 DISP OSD SLEEP 7 SURR 8 9 THX CLEAR 0 MEMO HEAD AUTO POWER ON 1. 2. 3. Be sure the TV auto mode is ENABLED. (Refer to page 35: PREFERENCE) Connect your TV TUNER (etc) to the TVVIDEO in terminal. Be sure to connect the VIDEO input. Turn OFF the power to the TV TUNER and the SR7001. 4. Turn ON the TV TUNER and tune in a receivable station. 5.
SELECTING ANALOG AUDIO INPUT OR DIGITAL AUDIO INPUT AV SURROUND RECEIVER SR8001 LIP.SYNC PREV MUTE M GUIDE PURE DIRECT DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST SPKR A B DISC 6.1 V-OFF MT X 6.1 PEAK NIGHT ATT ANALOG EQ DIGITAL SURROUND MODE S TEST SR MULTI AUTO MULTI SPEAKER BAND 7.1CH INPUT T-MODE SURR 1 2 3 7.1CH ATT SPK-AB 4 5 6 DISP OSD SLEEP 7 8 9 D2 MEMORY D3 D4 MultEQ THX ENTER MENU PHONES CH.
ENGLISH SPEAKER A/B 1. To cancel the 7.1 CH. INPUT setting, press the 7.1 CH INPUT button on the front panel or press 7.1 CH on the remote. 2. AV SURROUND RECEIVER SR8001 LIP.SYNC VOLUME PREV INPUT SELECTOR MUTE GUIDE ULTI AUTO AUTO SURR TUNED DIRECT ST SPKR A B DISC 6.1 V-OFF MT X 6.1 PEAK NIGHT ATT ANALOG EQ DIGITAL SURROUND C SL S PURE DIRECT SLEEP SR TEST CH.SEL SURR 1 2 3 7.1CH ATT SPK-AB MULTI SPEAKER BAND 7.
SOURCE M 1. (TUNER) To operate the unit from the remote control, press the TUNER button on the remote control so that the tuner mode is engaged. LISTENING TO THE TUNER 2. 3. 4. Frequency scan step for AM is selectable. Default setup is 10 kHz step, if your country’s standard is 9 kHz step, Press BAND button on the front panel or TUNER button on the remote more than 5 seconds. Scan step will change. Note: • Preset memory for the tuner will clear by changing this setup. SOURCE 3. 2.
ENGLISH MANUAL PRESET MEMORY PRESET MEMORY With this unit you can preset up to 60 FM/AM stations in any order. For each station, you can memorize the frequency and reception mode if desired. 3. RECALLING A PRESET STATION 2. 4. LIP.SYNC PREV DIRECT DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST SPKR A B DISC 6.1 V-OFF MTX 6.1 PEAK NIGHT ATT ANALOG EQ DIGITAL SURROUND DIGITAL L AAC C VCR DSS CD CD-R MD TAPE AUX1 AUX2 AMP LIGHT S SR 1 2 3 7.
SORTING PRESET STATIONS You can remove preset stations from the memory using the following procedure. NAME INPUT OF THE PRESET STATION. AV SURROUND RECEIVER SR8001 READY INPUT SELECTOR VOLUME PURE DIRECT 2. 3. DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST SPKR A B DISC 6.1 V-OFF MTX 6.1 PEAK NIGHT ATT ANALOG EQ DIGITAL SURROUND DIGITAL L AAC C R LFE PCM SL DSD S SR DOWN SURROUND TEST CH.SEL SURR 1 2 3 7.
ENGLISH CHECKING THE XM SIGNAL STRENGTH AND RADIO ID LISTENING TO XM SATELLITE RADIO SELECTING AN INPUT SOURCE Before you can listen to XM Satellite Radio, you must first select the input source on the SR7001. 3. Adjust the antenna location until signal strength is good. SWITCHING XM INFORMATION IN THE FRONT PANEL DISPLAY 4. Select channel 0 (XM000) with the 3 or 4 cursor buttons of the SR7001 or the SCAN + or SCAN – buttons of the remote control unit.
N A M E / T I T L E P i n k F l o i d This XM information can also be displayed on a TV monitor connected to the SR7001. TEST / CH.SEL SURR 1 2 3 7.1CH ATT SPK-AB 4 5 6 DISP OSD SLEEP 7 8 9 2. PRESET SEARCH MODE SEARCH MODE CH You can search for the channel you want to listen to using one of three search modes. You can also enter the number directly to select the desired channel. VOL 2.
ENGLISH CATEGORY SEARCH MODE CHANNEL DIRECT CALL You can select the desired channel from the category allocated to each channel. Category being aired can be only selected. You can select the desired channel by directly tapping the numeric keypads on the remote control unit. LIP.SYNC PREV MUTE GUIDE M D1 D2 D3 D4 DIRECT DISP SLEEP MULTI AUTO AUTO SURR TUNED DIRECT ST SPKR A B DISC 6.1 V-OFF MT X 6.
CLEARING STORED PRESET STATIONS You can remove preset stations from the memory using the following procedure. M D1 2. 3. D2 D3 D4 D4 USE TV PAGE 2 DVD D5 VCR 3.5. 2. 5. TEST CH VOL V ST SPKR A B DISC 6.1 V-OFF MTX 6.1 TUNER CD CD-R MD TAPE AUX1 AUX2 AMP DIGITAL SURROUND SURR 1 2 3 7.1CH ATT SPK-AB 4 5 6 DISP OSD SLEEP DIGITAL L C R 7 LFE PCM SL S SR 8 9 DOWN THX 0 CLEAR BAND T-MODE MEMORY MEMO CLEAR DISPLAY LIP.SYNC 1.
ENGLISH MULTI ROOM SYSTEM MULTI ROOM PLAYBACK USING THE MULTI ROOM OUT TERMINALS 2. The Multiroom System mode allows the same source or different sources to be heard in two rooms other than where this receiver is installed. The SR7001 allows you to connect another set of speakers and place them in a different room or separated area for Iistening to music. 1. AV SURROUND RECEIVER SR8001 2. VOLUME INPUT SELECTOR PURE DIRECT DISP MULTI SLEEP AUTO AUTO SURR TUNED DIRECT ST SPKR A B DISC 6.
Room A output can be operated from a room where the receiver is not installed. This requires a separately sold IR receiver. (For connections, see page 12.) M 2. Press the VOL+ or VOL− button on the multi room remote control to set the desired volume. 3. In multi room mode, the multi room remote control can be used in the multiroom to operate the following functions.
ENGLISH REMOTE CONTROLLER OPERATION CONTROLLING MARANTZ COMPONENTS 1. Press the desired function button. • The selected function name and USE are displayed in the LCD. 2. Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide. • It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) POWER OFF ON/OFF ON SOURCE M D1 D1 D2 D3 D4 USE PAGE 1 D5 CH VOL OK 9 ; LIP.
ENGLISH CONTROLLING A MARANTZ CD RECORDER (CDR MODE) POWER OFF ON/OFF ON SOURCE M D1 D1 D2 D3 D4 USE 1 PAGE D5 CH VOL OK SOURCE ON/OFF POWER ON POWER OFF D1 - D5 / >(Page) MENU 0-9 MEMO CLEAR 2 4/¢ 9 ; 0 Turns the CD recorder on and off Turns the CD recorder on Turns the CD recorder off (Refer to page vi) Switches the display information Input the numeric Programs Clears the inputting Play Skip forward or previous track Stop Pause Record CONTROLLING A MARANTZ MD DECK (MD MODE) POWER OFF
ENGLISH BASIC OPERATION USE MODE (Normal operation status) This remote control is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD/CD-R, MD, TAPE (tape deck), AUX1, AUX2, and AMP (amplifier). Learning is not necessary for Marantz products. You can use these products without setting any codes. 1. 2. 3. Press the SOURCE button. For this example, press DVD.
This remote control is capable of learning and storing codes used by other remote controls that you already own. For codes which are not learned, the remote control will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer’s AV equipment which is set by the customer. The receiver sensor for the remote control signals is located at the top of the remote control. 7. Follow the same procedure to make the remote control learn the other buttons. 8.
ENGLISH 3. 4. 5. 6. 7. 8. 9. Press the DVD source button . The NAME indicator blinks. The “ ” blinks to indicate that the letter can be changed. ERASING PROGRAMMED CODES (RETURNING TO INITIAL SETTINGS) Press the 2 cursor button twice. Codes can be erased in five ways: by buttons, direct buttons, direct button pages, sources, and by all memory contents. The D in DVD blinks to indicate that the letter can be changed. Erasing Buttons and Erasing Direct Buttons Press the 1 numeric button to select A.
This procedure clears (resets) all programmed codes and names. Once all the data is cleared, the memory is returned to the factory default status. The programmed macros are also erased. 1 3 4 LEARN LEARN USE 1. PAGE 1 USE PAGE 1 2 USE PAGE 1 2 Hold down the M button for three seconds or more. The menu is displayed. 2. 3. 4. Press the D5 (ERASE) direct button . The USE and LEARN indicators blink. Press the CLEAR button while holding down the POWER ON and OFF buttons at the same time.
ENGLISH 2. Press the D4 (MACRO) direct button. The macro menu is displayed. The MACRO indicator displays and LEARN 2. Press the D4 (MACRO) direct button. The macro menu is displayed. The MACRO indicator displays and blinks. 3. Press the D1 (M-01) direct button . 4. Press the D3 (NAME) direct button . 5. 6. Press the 5 numeric button to select M. The NAME is displayed. 3. 4. The “ ” blinks to indicate that rewriting is possible. 7. 8.
EXECUTING THE MACRO TIMER Setting the macro timer enables the macro program to automatically turn the power for a device on or off or perform other operations. In the settings, you can select to execute the macro timer everyday or only once. Be sure to set the clock to the correct time before using the timer. The macro timer can only be set for one program a day. This example shows how to use the timer only once at 20:35 to execute a macro programmed to M-01.
ENGLISH • If the copying fails in the middle of the copying process, ERROR is displayed on the remote control. Check and perform steps 1 to 7 again. 5. Press the OK cursor button to enter the lighting time. 6. Once the setting is finished, press the M button. 11. Once copying is completed, press the M button on both remote controls. SETTING THE LIGHTING TIME • The LCD lights up when the LIGHT buttons are pressed.
In case of trouble, check the following before calling for service: 1. 2. 3. Are the connections made properly ? Are you operating the unit properly following the user’s guide ? Are the power amplifiers and speaker working properly ? If the unit does not operate properly, check items shown in the following table.
ENGLISH HDMI TROUBLESHOOTING If a problem should arise, first check the following. SYMPTOM CAUSE The display does not appear over an HDMI connection. The connected monitor or projector does not support HDCP. 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? 3. Are the speakers and other components operating properIy? The HDMI input of on the TV is not on. Set HDMI input so that it turns on, as explained in the TV's instruction manual.
disconnect the plug from the AC line supply - after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to operate the equipment Memory backup • In case a power outage occurs or the power cord is accidentally unplugged, the SR7001 is equipped with a backup function to prevent memory data such as the preset memory from being erased. HOW TO RESET THE UNIT SPKR A B DISC 6.1 V-OFF MTX 6.
RECEIVER/TUNER SETUP CODES AMPLIFIER Source button name : AMP Brand name Amstrad Arcam Audiolab Carver GE Genexxa Grundig Harman/Kardon JVC Left Coast Linn Magnavox Marantz Micromega Myryad Optimus Panasonic Philips Pioneer Polk Audio Realistic Revox Sony Soundesign Technics Thorens Victor Wards Yamaha Setup code 0105 0296 0296 0296 0105 0422 0296 0919 0358 0919 0296 0296 0919, 0296 0296 0296 0422 0335 0919, 0296 0040 0919, 0296 0422 0296 0247 0105 0335 0296 0358 0105, 0040 0381 RECEIVER/TUNER Source but
SATELLITE TAPE DECK CD/CD-R PLAYER TV Source button name : DSS Source button name : TAPE Source button name : CD, CDR, MD Source button name : TV Brand name Nokia OctalTV Orbitech Pace Panasonic Panda Paysat Philips Brand name Aiwa Carver Grundig Harman/Kardon Magnavox Marantz Myryad Optimus Philips Pioneer Polk Audio RCA Revox Sansui Sony Thorens Wards Brand name Genexxa Goodmans Grundig Harman/ Kardon Hitachi JVC Kenwood Krell LXI Linn MCS Magnavox Marantz Matsui Memorex Meridian Micromega Miro
TV TV TV TV Source button name : TV Source button name : TV Source button name : TV Source button name : TV Brand name Chun Yun Chung Hsin Cimline Cineral Citizen Clarion Clarivox Clatronic Condor Conrac Contec Craig Crosley Crown Curtis Mathes Brand name GE Brand name Kathrein Kendo Kenwood Kneissel Kolin Korpel Koyoda L&S Electronic LG LXI Leyco Liesenk & Tter Loewe Luxor M Electronic Brand name Onwa Optimus Optonica Orion Osaki Otto Versand Palladium Panama Panasonic Pathe Cinema Pausa Penney
TV TV VCR VCR Source button name : TV Source button name : TV Source button name : VCR Source button name : VCR Brand name Sambers Sampo Brand name Teac Tec Technema Technics Techwood Teco Teknika Telefunken Telemeister Teletech Tensai Tera Thomson Thorn Toshiba Brand name Anam Anam National Anitech Asha Asuka Audiovox Baird Basic Line Beaumark Bell & Howell Blaupunkt Brandt Brandt Electronic Broksonic Bush CCE CGE Calix Canon Carver Cimline Cineral Citizen Colt Combitech Craig Crown Curtis Mathes
VCR VCR VCR DVD Source button name : VCR Source button name : VCR Source button name : VCR Source button name : DVD Brand name Matsui Matsushita Medion Memorex Brand name Realistic Reoc ReplayTV Rex Roadstar Runco SBR SEG SEI STS Saba Salora Sampo Samsung Sanky Sansui Sanyo Saville Schaub Lorenz Schneider Scott Sears Seleco Semp Sharp Shintom Shogun Siemens Silva Singer Sinudyne Sonic Blue Sontec Sony Sunkai Sunstar Suntronic Sylvania Symphonic TMK Tandy Tashiko Diamond Digitrex Emerson Tatung Teac
DIRECT BUTTON FUNCTIONS Source button name : AMP PAGE Command Note PAGE 1 1 AUTO SELECT AUTO SURROUND 22 SELECT DOLBY MODE 3 DTS SELECT DTS MODE 4 EX/ES SELECT EX/ES 5 DIRECT SELECT PURE DIRECT PAGE 2 1 MCH-ST SELECT MULTI CHANNEL STEREO 2 STEREO SELECT STEREO MODE 3 VIRTUA SELECT VIRTUAL MODE 4 CS-II SELECT CS-II MODE 5 HT-EQ – PAGE 3 1 NIGHT NIGHT MODE ON/OFF 2 BASS + BASS + 3 BASS BASS 4 TREB + TREBLE + 5TREB TREBLE PAGE 4 1 MULTI MULTI ROOM ON/OFF 2 M-SPKR MULTI SPEAKER ON/OFF 3 A/D SELECT ANALOG/DIGITA
www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark.
