Owner`s manual

134
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Inputs
Setting items Description Page
Input Assign Changes input connector assignment.
154
Source Rename Changes the display name for this source.
156
Hide Sources Remove from the display input sources that are not used.
156
Source Level Adjusts the playback level of the audio input.
156
Input Select Sets the audio input mode and decode mode.
157
Input Mode Set the audio input modes for the dierent input sources.
157
Decode Mode Set the audio decode mode for input source.
157
2 Speakers
Setting items Description Page
Audyssey
®
Setup The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made
automatically.
158
Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey® Setup.
167
Amp Assign Select power amplifier usage method to match your speaker system.
167
Speaker Config. Indicate speaker presence and select speaker size categories based on bass reproduction capability.
168
Distances Set distance from listening position to speakers.
170
Levels Set the volume of the test tone to be the same when it is output from each speaker.
170
Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer.
171
Bass Set subwoofer and LFE signal range playback.
172
Front Speaker Set the front speakers to use for every sound mode.
172