Manualshelf

Owner`s manual

ManualsBrandsMarantz ManualsAV receiversSR5008
191192193194195196197198199200
199
Appendix
Settings
PlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Tips
2 The HDMI control function does not work
Symptom Cause / Solution Page
The HDMI control function does not
work.
•Check that “HDMI Control” in the menu is set to “On”.
•You cannot operate devices that are not compatible with the HDMI control function. In
addition, depending on the connected device or the settings, the HDMI control function may
not work. In this case, operate the external device directly.
•Check that the HDMI control function setting is enabled on all devices connected to this unit.
•When you make connection related changes such as connecting an additional HDMI device,
the link operation settings may be initialized. Turn o this unit and devices connected via
HDMI, and turn them on again.
150
119
119
119
2 When using ZONE2, no sound comes out
Symptom Cause / Solution Page
When using ZONE2, no sound comes
out.
•In ZONE2, you can select iPod/USB, TUNER, NETWORK, M-XPort or an input source with an
analog audio input connector.
129