Owner`s manual

200
Appendix
Settings
PlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Tips
Resetting factory settings
Perform this procedure if the display is abnormal or if operations cannot be performed.
Note that when you perform this operation, various settings are reset to their default values and setup will need to be performed again.
X
ZONE2 SOURCE
M-DAX
1
Turn o the power using X.
2
Press X while simultaneously pressing M-DAX and
ZONE2 SOURCE.
3
Once the display starts flashing at intervals of about 1
second, release the two buttons.
%
•If in step 3 the display does not flash at intervals of about 1 second, start over
from step 1.