Owner`s manual

35
Tuning in radio stations
nListening to preset stations
1
Press SHIFT/TOP MENU to select
the memory block (A to G).
CH A
FM 97.90MHz
ST.Name HD1
Song Title
Artist Name
Program Type
AUTO
STEREO
MEMORY
Memory
SEARCH
Search
BandTuning Mode
Preset
PRESET
TUNING
BAND T.MODE
TUNER
A8 FM 90.10MHz
A7 FM 90.10MHz
A6 FM 90.10MHz
A5 FM 90.10MHz
A4 FM 108.00MHz
A3 FM 98.10MHz
A2 FM 89.10MHz
A1 FM 87.50MHz
Preset Channel
2
Press PRESET +, PRESET – or
1 – 8 to select the desired preset
channel.
nDirect frequency tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH/INFO.
CH A1
Now Playing
FM ---.--MHz
DIRECT TUNE
AUTO
Input
0-9
MEMORY
Memory
SEARCH
Search
BandTuning
Preset
PRESET
TUNING
BAND
TUNER
2
Input frequencies using the 0 – 9.
•If o is pressed, the immediately preceding input is cancelled.
3
When setting is completed, press ENTER.
The preset frequency is tuned in.
RDS (Radio Data System)
Note that the RDS function only works when receiving RDS compatible
stations.
RDS (works only on the FM band) is a broadcasting service which
allows a station to send additional information along with the regular
radio program signal.
NOTE
The operations described as follows using
SEARCH/INFO will not function in areas in
which there are no RDS broadcasts.
nRDS search
Use this function to automatically tune to FM stations that provide
the RDS service.
1
Press TUNER twice to switch the
input source to “TUNER”.
2
Press SEARCH/INFO to select
“RDS”.
TUNER
CH A
Now Playing
FM 97.90MHz
ST.Name HD1
Song Title
Artist Name
Program Type
AUTO
MEMORY
Memory
SEARCH
Search
BandTuning Mode
Preset
PRESET
TUNING
BAND T.MODE
RDS station
Program category
Traffic info
Radio text
RDS
PTY
TP
RT
RDS
SEARCH CH+/-
Search mode
A1 FM 87.50MHz
Tuning
3
Press PRESET + or PRESET –.
The search for RDS stations begins automatically.
•If no RDS stations are found with the above operation, all the
reception bands are searched.
•When a broadcast station is found, that station’s name appears on
the display.
•If no RDS station is found when all the frequencies have been
searched, “NO RDS” is displayed.
If you press PRESET + or PRESET – within 5 seconds after the
broadcast station name is shown on the display, you can search for a
different station.
Basic version
Advanced version
Information
Basic version
BD