Operation Manual

7.1ch + Front B:
0
Setting to assign the power amplifiers
within this unit for connecting the second
set of front speakers.
0
You can switch between the desired
combination of front speakers A and
front speakers B.
Switch the front speaker using the “Front
Speaker” setting. (v p. 217)
0
You can connect speakers for up to 9.1-
channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1-
channels in accordance with the input
signal and sound mode.
0
When “Assign Mode” is set to “7.1ch + ZONE2”, “7.1ch (Bi-Amp)” or “7.1ch +
Front B” in the menu, the assigned channels are output from HEIGHT2
speaker terminals.
0
When Assign Mode is set to “5.1ch (Bi-Amp) + ZONE2” in the menu, the front
channels for Bi-Amp connection are output from HEIGHT1 speaker terminals,
and the ZONE2 channels are output from HEIGHT2 speaker terminals.
o
Floor
n
Layout
Select the floor speakers location.
5ch & SB
(Default):
This layout combines a surround back
speaker with the basic 5-channel layout.
5ch：
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
Contents Connections Playback Settings Tips Appendix
204
Front panel Display Rear panel Remote Index