Manualshelf

User guide

ManualsBrandsMarantz ManualsRadio receiversST-15S1
11121314151617181920
8
ENGLISH
7
Manual tuning (FM/AM)
1. Press the POWER ON/OFF switch !0 to turn on the
power.
2. Watching the display, press the BAND SELECT button
w to select the desired band (AM or FM).
3. Press the MENU button !4 to select menu.
4. Press the ENTER button !3 to set search mode.
5. Turn the GYRO TUNING dial !1 to select “Manual”.
6. Press the ENTER button !3 to set the manual tuning
mode.
7. Turn the GYRO TUNING dial !1 to tune in the desired
station.
7
Preset stations (FM/AM)
1. Use the “Auto tuning” or “Manual tuning” operation to
tune in the station to be preset in the memory.
2. Press the MENU button !4 to select menu.
3. Turn the GYRO TUNING dial !1 to select “Memory”.
4. Press the ENTER button !3 to set the preset mode and
make the preset channel number flash.
• Steps 1 to 4 can be skipped when using the MEMO
!2 button.
When this button is pressed, the preset memory
standby mode is set, regardless of the menu setting at
that time.
5. While the preset channel number is flashing, turn the
GYRO TUNING dial !1 to select the desired preset
channel (1 to 10).
6. While the preset channel number is flashing, press the
ENTER button !3 or MEMO button !2 to store the station
in the preset memory.
• To preset other channels, repeat steps 2 to 6.
• A total of 100 broadcast stations can be preset — 10
stations (channels 1 to 10) in each of groups A to J.
OPERATION
7
Recalling preset stations (FM/AM)
1. Press the POWER ON/OFF switch !0 to turn on the
power.
2. Watching the display, press the BAND SELECT button
w to select the desired band (AM or FM).
3. Press the MENU button !4 to select menu.
4. Press the ENTER button !3 to set search mode.
5.
Turn the GYRO TUNING dial !1 to select “Preset”.
6. Press the ENTER !3 button and set the preset mode.
7. Watching the display, turn the
GYRO TUNING dial !1
to
select the desired preset channel.
ST-15S1N 01 Eng 06.8.29 2:48 PM ページ8