Manualshelf

User guide

ManualsBrandsMarantz ManualsRadio receiversST-15S1
11121314151617181920
10
ENGLISH
7
TP search
Use this function to find RDS stations broadcasting traffic
program (TP).
1. Press the MENU button !4 to select menu.
2. Turn the GYRO TUNING dial !1 to display “RDS”.
3. Press the ENTER button !3 to set the RDS search
selection mode.
4. Turn the GYRO TUNING dial !1 to display “TP Search”.
5. Press the ENTER button !3 to set the TP search
standby mode.
6. Turn the GYRO TUNING dial
!1
. The RDS search
automatically begins and the RDS LED flashes.
• If no TP station is found with above operation, all the
reception bands are searched.
• The station name is displayed on the display after
searching stops.
7.
• If no other TP station is found when all the frequencies
are searched, “NO programme” is displayed.
7
PTY search
• Use this function to find RDS stations broadcasting a
designated program type (PTY).
• For a description of each program type, refer to “Program
Type (PTY)”.
1. Press the MENU button !4 to select menu.
2. Turn the GYRO TUNING dial
!1
to display “RDS”.
3. Press the ENTER button !3 to set the RDS search
selection mode.
4. Turn the GYRO TUNING dial
!1
to display “PTY
Search”.
5. Press the ENTER button !3 to set the PTY search
selection mode.
6. Watching the display, turn the GYRO TUNING dial
!1
to
call out the desired program type.
• When receiving an RDS station, its program type is
displayed first.
• When not receiving an RDS station, “PTY” flashes.
7. Press the ENTER button !3 to set the PTY search
standby mode.
8. Turn the GYRO TUNING dial
!
1. The RDS search
automatically begins and the RDS LED flashes.
• If there is no station broadcasting the designated
program type above operation, all the reception bands
are searched.
• The station name is displayed on the display after
searching stops.
9.
• If no other station broadcasting the designated
program type is found when all the frequencies are
searched, “NO programme” is displayed.
OPERATION
ST-15S1N 01 Eng 06.8.29 2:48 PM ページ10