User guide

15
ENGLISH
SEARCH MODE
7
Sorted list search mode
• You can select any component for listening from the list of
sorted components.
• The sorted components are set in the sort mode. (
☞
page 16)
1. Press the MENU !4 button to select menu.
2. Turn the GYRO TUNING dial !1 to display the search
mode selection screen.
3. Press the ENTER button !3 to set the search mode.
4. Turn the GYRO TUNING dial !1 to select “Search Mode
(Sorted List)”.
5. Press the ENTER button !3 to display the first channel
on the Sorted List.
• You can select any component from the sorted list.
7
Preset search mode
1. Press the MENU button !4 to select menu.
2. Turn the GYRO TUNING dial !1 to display the search
mode selection screen.
3. Press the ENTER button !3 to set the search mode.
4. Turn the GYRO TUNING dial !1 to select “Search Mode
(Preset)”.
5. Press the ENTER button !3 to display the first channel at
Preset.
• You can select any component from the preset.
OPERATION
7
Tuning aid
1. Press the MENU button !4 to select menu.
2. Turn the GYRO TUNING dial !1 to display the search
mode selection screen.
3. Press the ENTER button !3 to set the search mode.
4. Turn the GYRO TUNING dial !1 to select “Search Mode
(Tuning aid)”.
5. Press the ENTER button !3 to display the first channel at
Tuning aid.
6. Turn the GYRO TUNING dial !1 to display the frequency
of the ensemble that you want to receive.
7. Press the ENTER button !3 to display the signal strength
for that ensemble.
• Move antenna while watching the display and to try to
raise the current level to the “>” mark.
8. Press the ENTER button !3 to display the first channel
on this ensemble (Sounds comes out).
• The search mode at this time is set to “Sorted list
search mode”.
DISPLAYDISPLAY
TUNEDTUNED
STEREOSTEREO
DOWNDOWN TUNING/PRESETTUNING/PRESET UPUP
RDSRDS
SECONDARYSECONDARY
DAB/FM/AM TUNER ST-15S1DAB/FM/AM TUNER ST-15S1
BANDBAND
SELECTSELECT
AUTOAUTO
TUNETUNE
MENUMENU
ENTERENTER
MEMOMEMO
POWER ON/OFFPOWER ON/OFF
!1 !4!3
ST-15S1N 01 Eng 06.8.29 2:48 PM ページ15