User guide

3
ENGLISH
FRONT PANEL
PART NAMES AND FUNCTIONS
DISPLAYDISPLAY
TUNEDTUNED
STEREOSTEREO
DOWNDOWN
TUNING/PRESETTUNING/PRESET
UPUP
RDSRDS
SECONDARYSECONDARY
DAB/FM/AM TUNER ST-15S1DAB/FM/AM TUNER ST-15S1
BANDBAND
SELECTSELECT
AUTOAUTO
TUNETUNE
MENUMENU
ENTERENTER
MEMOMEMO
POWER ON/OFFPOWER ON/OFF
q w e rtyu o !0 !1 !2
!5
!3 !4i
For details on the functions of these parts, refer to the pages given in parenthesis.
q DISPLAY button
This button is used to select the display mode (
☞
page
9, 11, 17).
w BAND SELECT button
This button is used to select DAB, FM or AM.
e AUTO TUNE button
• When FM (AM) is selected.
Press to preset automatically FM (AM) stations.
(
☞
page 7)
• When DAB is selected.
Press to active auto location of all available DAB
services.
Press once for UK service or hold for longer than 2
seconds to activate an inter national search.
r TUNED indicator
This indicator illuminates when a station is properly
tuned in.
t STEREO indicator
This indicator illuminates when an FM station is being
tuned into stereo condition.
y RDS indicator
This indicator illuminates when receiving RDS broadcasts,
and flashes during the RDS search.
u SECONDARY indicator
This indicator illuminates when a secondary service is
available (
☞
page 14).
i Remote control sensor
This sensor receives the infrared light transmitted from
the wireless remote control unit.
For remote control, point the wireless remote control unit
to the sensor.
Some of the functions can be operated with the remote
control unit (Accessory of Marantz’s integrated amplifier
PM-11/15 series etc.).
o Display
!0 Power ON/OFF switch
This is used to turn the unit’s power ON and OFF.
When it is pressed, the display lights and the power is
turned on; when it is pressed again, the power is turned off.
!1 GYRO TUNING dial
This dial is used in conjunction with the MENU button,
and is used to select and determine the operation mode.
Also, this dial is used for the TUNING/PRESET search.
In the tuning mode, the reception frequency is tuned up
or down. Turning the control in the right direction tunes
the frequency up. Tuning the control in the left direction
tunes the reception frequency down.
In the preset mode, the selection of the preset channel is
moved up or down. The auto tuning operation cannot be
used when in this mode.
When entering station names, use this control to select
the letters (
☞
page 12).
!2 MEMO button
Press this button to enter the tuner preset memory
numbers or station names.
!3 ENTER button
This button is used to set the menu.
!4 MENU button
This button to ENTER/EXIT menu mode.
The unit times out if no operation is performed for about
5 seconds after the menu mode is set.
!5 Illumination Lamp
The side illumination casts a blue light over switches and
buttons. It can be turned ON and OFF from the
DISPLAY button. For instructions on how to operate the
side illumination, see “HOW TO OPERATE THE
ILLUMINATION LAMP” on page 18.
Memo
• Please be sure to unplug the cord when you leave home
for, say, a vacation.
• Noise may be generated if a near-by television set is on
during AM, FM or DAB broadcasting reception. The tuner
should be used as far away from a television as possible.
• Effective period of memory back-up is about a month
under normal temperature.
ST-15S1N 01 Eng 06.8.29 2:48 PM ページ3