R Model ST6000 User Guide TUNER
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 12. Grounding or Polarization — The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated. 1.
FIG.
Thank you for selecting the Marantz ST6000 FM/AM Stereo Tuner for your system. Please read these operating instructions carefully. We recommend that you read the entire user guide before you attempt to connect or operate the Tuner. After you have reviewed the contents of this manual, we suggest that you make all system connections before you attempt to operate the unit.
OPERATIONS 3. FINE, MANUAL TUNING 1. MEMORY PRESETTING This function used for selection the manual tuning of the fine tuning mode. Fine tuning mode is available only in the FM mode. a. Manual operation 1. Press the TUNING MODE button. 2. Every time you press this button, the following will be displayed For example: presetting FM 90.1 M Hz, to Preset number. 10 1. Select the FM by using the BAND button. 2. Tune to 90.1 MHz by using the TUNING 5∞ button. 3.
ENGLISH Daily timer 6. FILING (STATION NAME, ETC. ) Example: presetting ON time: 7:15 OFF time: 9:30 For example: FM 98.8 MHz Preset CH-10 Station name BBC1 1. Press the TIMER SET button. 1. Select the preset number 10 in the preset mode. DAILY PRESET CH MHz 2. Preset the ON time by the TUNING 5∞ button and the NEXT button. 2. Press the ST.NAME/DISPLAY button long pushed (for more than 1.5 (Same as operation of time adjust) second) Then, “_ _ _ _” will be displayed in the clock indicator.
TROUBLESHOOTING GUIDE If your Tuner should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization. Probable cause (s) Symptom Suggested remedy INPUT SELECTOR of amplifier is not Select “TUNER” in INPUT SELECTOR set to “TUNER” Volume of amplifier positioned in “MIN.” Adjust Volume accordingly The terminal for system connection is pullet out.
Use these buttons together to tune in a station by inputting the station’s broadcast frequency directly through the remote control. 1. Press the F.DIRECT button on the remote control. ENGLISH t F.DIRECT button, y Numeric buttons NAME AND USE OF EACH BUTTON ON THE REMOTE CONTROL 2. Next, use the numeric buttons (0 to 9) to input the broadcast frequency of the desired station. u !2 SLEEP BAND DISPLAY F.DIRECT 1 2 3 4 5 6 7 8 9 FM MODE IF BAND 0 TUNING PRESET PRESET MEMO P.
USING THE REMOTE CONTROL UNIT 1. Remote control Operate the remote control unit (RC6000ST) within a distance of approx. 5 m from the infrared signal reception window (remote sensor) on the front of the Tuner. Remote control operation may not be possible if the remote control unit’s transmitter is not pointing in the direction of the remote sensor or if there is an obstruction between the transmitter and the remote sensor. Remote control operating range Tuner (ST6000) ENGLISH Approx.
SPECIFICATIONS FM section Frequency range ......................................................................................................................... 87.5 MHz to 108.0 MHz 50 kHz steps: Manual mode (10 kHz steps: Fine mode) Sensitivity (S/N: 30 dB) .......................................................................................................................................... 1.2 µV Total harmonic distortion (1 kHz) Mono ................................................................
FIGURES BEFORE USE CAUTION:Do not plug the power cord of any component into AC outlets and do not turn their POWER switches on until connections have been performed.
CONTROLS AND FUNCTIONS h g !1 !6 !2 !3 TUNER ST6000 DOWN ON/OFF TIMER DAILY ONCE A ON/STAMDBY q STEREO RDS PTY B ANTETTA WIDE FM PRESET UP TIMER SET PT TP TA AUTO MEMO PRESET CH AM PM STANDBY POWER TUNED kHz MHz NARROW IF BAND w e TIME ADJ. ST.
COUNTRY AUSTRALIA AUSTRIA BELGIUM BULGARIA CANADA CYPRUS CZECH REPUBLIC DENMARK DUBAI ESTONIA F.Y.R.O.M. FINLAND FRANCE GERMANY GREECE HEADQUARTERS EUROPE: HONG KONG HUNGARY ICELAND INDIA IRAN IRELAND ISRAEL ITALY JAPAN KOREA KUWAIT LATVIA LEBANON LITHUANIA MALAYSIA MALTA MAURITIUS NETHERLANDS NEW ZEALAND NORWAY OMAN POLAND PORTUGAL PROFESSIONAL EUROPE PROFESSIONAL U.S.A.
