Radio User Manual

8
ENGLISH
ADJUSTING CURRENT TIME
1. Press the TIME ADJ button t. Then “Hour display”
indicator will blink.
2. The hour is set with the TUNING 5∞ button i.
3. Press the NEXT button !0. Then “minute display”
indicator will blink.
4. The minute is set with the TUNING 5∞ button i.
5. Press the NEXT button !0. The current time is set.
Note
• In the event of a power failure or when the AC mains cord
is disconnected, you must readjust the clock.
DAILY TIMER
Example: presetting ON time: 7:15 OFF time: 9:30
1. Press the TIMER SET button !3.
2. Preset the ON time by the TUNING 5∞ button i and
the NEXT button !0.
(Same as operation of time adjust)
3. If ON time setting OK, Press the NEXT button !0.
DAILY
DAILY
DAILY
4. Preset the OFF time by the TUNING 5∞ button i and
the NEXT button !0.
(Same as operation of time adjust)
5. Press the NEXT button !0. The timer setting is
completed.
* Daily timer makes the system turn on and off at preset
times every day.
* If you want to record at ON time, select the desired
source with the input selector deck to the REC
position.
* If the timer indicator “TIMER” is off, the daily timer
doesn’t work.
7
Checking the daily timer
* If you want to check the daily timer, press the TIMER
SET button !3 at first. The ON time setting will be
displayed in the clock indicator. And, press the TIMER
SET button !3 again. The OFF time setting will be
displayed. Finally press TIMER SET button !3 once
again. It returns to the normal display.
7
Canceling the daily timer
* While setting the daily timer, if the cancel button is
held depressed, the timer function will be canceled.
Note
To temporarily cancel the daily timer, press the (Timer)
ON/OFF button !2. The ON time and OFF time settings
are retained in memory.
DAILY TUNED STEREO
MHz
TIMER
DAILY
TUNED STEREO
MHz
DAILY
OPERATIONS
blink
blink
blink
ST6001N 01 Eng 06.1.20 10:34 AM ページ8