Radio User Manual
q POWER ON /STANDBY button
This button is used to power on or power standby.
w STANDBY indicator
This indicator illuminates red when the unit’s status is
standby.
When daily timer is activated, this indicator lights green.
e ANTENNA A/B button
This button is used selection of the FM antenna A or B.
r IF BAND button
This button is used for selecting the bandwidth of the FM
broadcast.
t TIME ADJ (adjust) button
This button is used for adjusting the current time.
y ST.NAME/DISPLAY button
This button is used for displaying the signal strength.
Press this button slightly longer (for more than 1.5
second) to file in manually stations name in the preset
memory.
u TUNING MODE button
This button is used for selecting the manual tuning or the
fine tuning mode. Fine tuning mode is available only in
the FM band.
i TUNING 5∞ (UP/DOWN) button
This button used for tuning in the desired broadcasting
stations or adjusting the time, or manual tuning, etc.
o CANCEL button
This button is used for canceling the program during
manual file or adjusting the on/off time of the timer.
3
ENGLISH
!0 NEXT button
This button is used for advancing to the next step during
time adjustment or manual filing, etc.
!1 MEMO button
This button is used for presetting the broadcasting
stations.
!2 (Timer) ON/OFF button
This button used for engaging the daily timer function.
!3 TIMER SET button
This button is used for presetting the time when the
system is turned on and off every day at a specified
time.
!4 PRESET 5∞ (UP/DOWN) button
This button used for preset in the desired broadcasting
stations.
!5 FM MODE button
This unit automatically switches into the STEREO mode
when a FM stereo broadcast is received press this
button to change the monaural mode, then the
“STEREO” indicator will go out on the display.
!6 RDS button
When the FM RDS broadcasting is displayed, and it
retrieves, this button is operated. (See page 9)
!7 BAND button
This button is used for selecting the FM, MW or LW
broadcast.
!8 DISPLAY/INDICATOR
!9 Antenna A or B indicator
@0 FM WIDE or NARROW band indicator
PARTS NAMES AND FUNCTIONS
FM/AM TUNER ST6001
ANTETTA
IF BAND
FM
ON/STAMDBY
POWER
STANDBY
WIDE
NARROW
AB
RDS
TIMER SET
BAND
ON/OFF
FM MODE
PRESET
UP
DOWN
UP
DOWN
TUNING
MEMONEXT
CANCEL
TUNING
MODE
/DISPLAY
ST.NAME
TIME ADJ.
TIMER
DAILY
TUNED STEREO RDS
PTY TP TA
PRESET
kHz
MHz
CH
MEMO
qew r tyu oi!0!1
!2 !3 !4
!5 !6 !7
!8
@0!9
FRONT PANEL
FM
More than 50dB
25dB
-
49dB
10dB
-
24dB
Less than 9dB
MW/LW
More than 75dB
60dB
-
74dB
50dB
-
59dB
Less than 49dB
Condition
Signal strength is good
Signal strength is marginal
Signal strength is poor
Loss of the signal
ST6001N 01 Eng 06.1.20 10:34 AM ページ3