Model ES7001 User Guide Home Theater System ES7001U DFU_0_cover.indd III 07.7.
IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Before using this unit, please read the User Guide carefully to ensure proper operation of the unit, and retain it together with the supplied warranty. ENGLISH Thank you for purchasing the Marantz Home Theater System. CONTENTS FEATURES .................................................................................................. 2 BEFORE USING THIS UNIT........................................................................ 3 NAMES AND FUNCTIONS OF PARTS ..............................................
ENGLISH FEATURES [MAIN FUNCTION] [DIGITAL AMPLIFIER SECTION] ¶ What is OPSODIS? The unit incorporates a 6-channel digital power amplifier, allowing direct drive of the speakers’ tweeter, midrange and woofer. The digital audio signals are input to the digital amplifier of the unit through the optical digital and the HDMI connectors without digital-analog conversion.
¶ DOLBY ¶ dts This section must be read before any connection is made to the mains supply. 7 Equipment mains working Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, the doubleD symbol and “AAC” are trademarks of Dolby Laboratories. ¶ AAC AAC is a format of the MPEG2 standard. This features excellent high-compression encoding and high-quality sound, enabling reproduction of 2-channel stereo sound and 5.1-channel surround, and bilingual broadcast.
ENGLISH BEFORE USING 7 For use of Remote controller ¶ Loading batteries Before using the remote controller for the first time, load the batteries in the remote controller. The batteries provided are used to verify the operations of the remote controller only. q Remove the battery cover. ¶ Cautions on handling batteries Misuse of the batteries can result in electrolyte leakage, rupturing, corrosion, etc. Bear in mind the following points when using batteries.
NAMES AND FUNCTIONS OF PARTS ENGLISH o Dolby PL II indicator The indicator lights in green when 2channel signal is input and the Dolby Pro Logic II mode is set to Pro Logic II MOVIE or Pro Logic II MUSIC. When Dolby Pro Logic II mode is set to OFF by pressing the Dolby PL II button on the remote controller, this indicator goes out. FRONT PANEL !0 Dolby D indicator When a Dolby digital signal is input, this indicator lights in blue.
ENGLISH NAMES AND FUNCTIONS OF PARTS w ANALOG IN 1 (VCR)/2 (AUX) jacks REAR PANEL These jacks are used to connect to the analog output jacks on a VCR and external player. • Connect a VCR to the ANALOG IN 1 jacks. To select the input, press the A1 button on the remote controller. • Connect an external player to the ANALOG IN 2 jacks. To select the input, press the A2 button on the remote controller. MODEL NO.ES7001 e SUB W.
ENGLISH NAMES AND FUNCTIONS OF PARTS REMOTE CONTROLLER: RC002ES 7 Buttons used for this unit z x ⁄3 ⁄2 ⁄1 ⁄0 c v b n m . , z POWER button Press this button to turn on the unit or to set it to standby mode. x Input select buttons These buttons are used to select the input source to be played. Press the input source button you want to play. c Dolby PL II button Press this button to switch the Dolby Pro Logic II sound field environment.
ENGLISH NAMES AND FUNCTIONS OF PARTS 7 Buttons used for a TV ⁄4 TV POWER button Notes: ⁄4 • Before using the remote controller for a TV, set the preset code for the TV. Press this button to turn on the TV or to set it to standby mode. ⁄5 TV MUTE button • For details on the operation of the TV, refer to the instruction manual supplied with the TV. Press this button to mute the TV sound temporarily. Press it again to restore the sound.
ENGLISH NAMES AND FUNCTIONS OF PARTS 7 TV preset code number lists Acer ................................................................ 1141 Admiral ....................................... 1002, 1009, 1089 Aiko................................................................. 1059 Aiwa ...................................................... 1117, 1118 Akai................................................................. 1001 Amtron ............................................................ 1023 Anam ....
ENGLISH NAMES AND FUNCTIONS OF PARTS 7 Before using the remote 7 Buttons used for a Marantz DVD player controller for Marantz products 1. Press the button specified for the equipment you want to operate. • DVD player: “d1” button on the remote controller DVD POWER button Turns on the DVD or sets it to standby mode. 5 button Moves the cursor up. ∞ button Moves the cursor down. • IS201: “A2” button on the remote controller 2 button Moves the cursor left. 2.
7 Buttons used for the Marantz IS201 iPod universal dock AUX POWER button Turns on the power of an iPod connected to the IS201 or sets it to standby mode. 5 button Functions the same as turning the click wheel of an iPod counterclockwise. Note: The iPod volume cannot be adjusted. ∞ button Functions the same as turning the click wheel of an iPod clockwise. Note: The iPod volume cannot be adjusted.
ENGLISH CONNECTIONS Notes: • Do not connect the AC power cords of the unit and connected equipment to the wall outlet before making all connections. • Insert the connecting cable plugs firmly into the connectors. A loose connection may result in noise. • Be sure to connect the L (left) channel to the white connector, and the R (right) channel to the red connector. • Connect the input and output connectors correctly. • Please refer to the respective instruction manual for connected equipment.
CONNECTING DIGITAL EQUIPMENT EQUIPPED WITH THE HDMI CONNECTOR CONNECTING ANALOG EQUIPMENT • This unit is equipped with two analog inputs. • Use a commercially available RCA audio cable for connection. ENGLISH CONNECTIONS • This unit is equipped with two HDMI digital inputs and one HDMI digital output. • Use a commercially available HDMI connecting cable for connection. 7 Connections Note: • Connect a VCR to the ANALOG IN 1 connector on the unit.
ENGLISH CONNECTIONS CONNECTING A SUBWOOFER REMOTE CONTROL CONNECTIONS • For connection with the optional SW7001 subwoofer, use the connecting cable supplied with the SW7001. • The REMOTE OUT jack is used for connection with the Marantz DVD player, etc. equipped with remote control output. • If the power of the SW7001 is turned on after connection, it will be turned on or goes into standby mode in conjunction with the operations of the unit.
7 Installing the unit [To mount the unit in the optional AV rack] ENGLISH INSTALLATION • Install the unit so that the center of the seat is aligned with the center of the unit. ES7001 ES7001 ES7001 App rox. 2m (78 3/4 AV rack inch es) • When mounting the unit in a rack, align the front surface of the rack with the front of the unit.
ENGLISH BASIC OPERATIONS TURNING ON THE UNIT 1. Turn on the power of the audio equipment connected to this unit. Set the input selector on the audio equipment to this unit. 2. Connect the AC power cord to the wall outlet. 3. Press the ON/STANDBY button q on the unit or POWER button z on the remote controller to turn on the power of the unit. • Each time the button is pressed, the power of the unit is switched between on and standby mode.
ENGLISH SETTINGS The following setting items are available with this unit. • Setting Installation Height of Speakers (page 17) SETTING INSTALLATION HEIGHT OF SPEAKERS • Setting the number of audience (page 17) • This item is used to set the installation location (height) of the unit. • Setting the viewing/listening distance (page 18) • Press the ELEVATION button on the remote controller to change the setting.
ENGLISH SETTINGS SETTING THE VIEWING/ LISTENING DISTANCE ¶ When the distance is shorter than 2 m (78 3⁄4 inches) • This item is used to set the distance between the unit and audience. • Hold down the SEAT button on the remote controller for over two seconds to change the setting. Each time you hold down the button for over two seconds while the viewing/listening distance indication is displayed in the display window, the setting switches as described below. This item is set to “Approx.
ENGLISH SETTINGS SETTING THE BINAURAL MODE ¶ When “PL II MOVIE” is selected SETTING THE DOLBY PRO LOGIC II MODE • To change the setting, press the Dolby PL II button repeatedly. • Press the MODE button on the remote controller to listen to the audio source recorded in binaural mode. • This item is used to select the sound field environment produced by Dolby Pro Logic II. • The MODE indicator lights in blue and the stereophonic effect of the sound source is reproduced especially realistically.
ENGLISH SETTINGS SETTING MULTI-CHANNEL TV SOUND MODE • When the unit receives a high-definition broadcast (AAC signal), the AAC indicator lights in yellow. In this case, you can select the output sound from the TV by pressing the BILINGUAL button on the remote controller. ¶ When “Main channel” is selected SETTING THE NIGHT MODE ¶ When “Sub channel” is selected This mode is convenient for enjoying a movie, etc. at night.
RESETTING ITEMS TO FACTORY PRESET SETTINGS To reset all the items that have been set to the factory preset settings (initial settings), hold down the ON/STANDBY button and VOLUME + button on the unit simultaneously for over 3 seconds while the power of the unit is on. After two seconds, the unit goes into standby mode, turns on again, then the settings are reset to their factory preset ones. 7 Initial settings of unit Power ...................................................... ON Input selector ..........
ENGLISH SPECIFICATIONS OTHERS ¶ Audio power amplifier ¶ Input Rated power output (20 Hz-20 kHz / THD = 0.05%) .........................................26 W/ch 6Ω Maximum power output (1 kHz/JEITA) .........................................30 W/ch 6Ω Frequency characteristics Analog input: ANALOG IN 1 ........................20 Hz-20 kHz (± 3 dB) Digital input: PCM 44.1 kHz ........................20 Hz-20 kHz (± 3 dB) S/N ratio: PCM 44.1 kHz ................................................
www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark. Printed in Japan ES7001U DFU_0_cover.indd II 07/2007 00M20AJ851250 mzh-g 07.7.
