Owner`s manual
16
Playing BD and DVD-Video
1
Press ON/STANDBY X to turn
on power to the unit.
2
Press OPEN/CLOSE 5 to open
the disc tray and insert the disc.
3
Press 1.
The disc tray closes and playback
starts.
4
Set audio and subtitles in the
disc menu to play back BD/
DVD-Video.
5
Press TOP MENU or POP UP MENU to display the
menu.
n Top menu (Example)
Title 1 Top menu
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 2
n Pop up menu (Example)
Popup menu
Title 1 Title 2 Bonus title
If you have so
mething to sa
y, see this pict
ure before you
The Blu-ray disc has the pop-up menu function.
While playing back the main title of a Blu-ray disc that supports the
pop-up menu, you can press POP UP MENU to select the audio,
subtitles, chapters, etc. during playback.
n Operations enabled during playback
(vpage23)
n Settings enabled during playback
(vpage28)
•When playing back a hybrid BD disc, use the following procedures
to select the playback layer before inserting the disc (vpage55).
q Press and hold DISC LAYER repeatedly to select “BD”.
Multi Audio BD
Multi
Super Audio CD
Audio
DVD-Audio
BD
Hybrid BD
w Press DISC LAYER to select the playback layer.
DVDBD
BD
BD layer
DVD
DVD layer
Multi-channel compressed audio signals (bitstreams) are recorded
on some BD and DVD discs. This unit can output such compressed
audio signals to the AV receiver as they are, and the AV receiver can
then decode these signals.
Note that when playing back sub video recorded on a BD disc it is
necessary for this unit to decode signals, so you must switch the
audio output method. In this case, by referring to “Playing BD-Video
compatible with Bonus View” (vpage 33), switch the BD audio
mode before playback.
BD multi-channel audio is not output
•When stereo (2-channel audio) is selected in the disc menu audio
settings, multi-channel audio is not output.
Select a multi-channel setting (such as 5.1-channel).
•Make sure that the connected HDMI device supports the multi-
channel audio input.
Basic version
Advanced version
Information
Basic version
DVD