Model ZC4001 User Guide Audio Client ZC4001N DFU_00_cover Page 5 06.3.30, 9:22 AM Adobe PageMaker 6.
ENGLISH DEUTSCH WARRANTY For warranty information, contact your local Marantz distributor. GARANTIE Bei Garantiefragen wenden Sie sich bitte an Ihren Marantz-Händler. RETAIN YOUR PURCHASE RECEIPT Your purchase receipt is your permanent record of a valuable purchase. It should be kept in a safe place to be referred to as necessary for insurance purposes or when corresponding with Marantz.
CE MARKING English The ZC4001 is in conformity with the EMC directive and low-voltage directive. Français Le ZC4001 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell ZC4001 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräte. Nederlands De ZC4001 voldoet aan de EMC eisen en de vereisten voor laag-voltage. Español El ZC4001 está de acuerdo con las normas EMC y las relacionadas con baja tensión.
Español - - - - Svenska ADVERTENCIAS No exponga el equipo a la lluvia ni a la humedad. No extraiga la tapa del equipo. No introduzca nada en el interior del equipo a través de los orificios de ventilación. No maneje el cable de alimentación con las manos mojadas. No cubra la ventilación con objetos como manteles, periódicos, cortinas, etc. No deben colocarse sobre el equipo elementos con fuego, por ejemplo velas encendidas.
FOREWORD INTRODUCTION INTRODUCTION .................................. 1 PRECAUTIONS ................................... 1 DESCRIPTION ..................................... 1 FEATURES .......................................... 2 FRONT PANEL .................................... 3 This section must be read before any connection is made to the mains supply. Thank you for purchasing the Marantz ZC4001 Audio Client.
ENGLISH FEATURES By simply plugging the power cables of the ZC4001 and ZR6001 into ordinary home electrical outlets, the ZR6001 sends audio sources over your home electrical line for playback by the ZC4001. PLC (POWER LINE COMMUNICATION) The ZR6001* converts analog audio signals into noncompressed linear PCM digital signals, modulates them into high frequency signals, and sends them over power lines. The ZC4001 demodulates the sent signals and converts them back to analog signals.
TOP PANEL ENGLISH FRONT PANEL q STANDBY 1 . POWER ON/STANDBY z w q w SPEAKERS INFRARED receiver window This window receives infrared signals for the remote control unit. z x c POWER button and STANDBY indicator When this button pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated. v v x a s SOURCE buttons These buttons are used to switch the source of ZR6001. * When the EXT.
ENGLISH REAR PANEL REMOTE CONTROL OPERATION The ZC4001 does not come with a remote controller. However, it does have an infrared sensor that functions as a remote control signal receptor, and therefore it can be operated with the system remote controller (RC5500SR, etc.) of other Marantz products. Remote-controllable range pr Ap SERVICE ONLY ox. 5m 60° q q w e e EXT INPUT This is the analog audio input. The audio inputs require RCA-type connectors.
CONNECTING AUDIO COMPONENTS There is one Audio EXT INPUT jack on the rear panel. You can use this jack to input analog audio signal from CD, TAPE DECK, or other analog source component. CONNECTING AC POWER CABLE Connect the AC power cable of the ZC4001 to a wall electrical outlet. Also connect the AC power cable of the ZR6001 to a wall electrical outlet. Notes: • The ZC4001 and ZR6001 send audio data over power lines.
ENGLISH 1. 2. PLC SETTING RECALIBRATION If audio is lost when the ZC4001 and ZR6001 are connected over a PLC connection, recalibrate the signal to the best carrier frequency. The ZR6001 is set first. Using the OSD menu system, set “MULTI PLC SERVER” to “ON”. 1 1. 9 MU L T I 1. 2. Press and hold the ENTER button for 5 sec. or more. 2. Press the ENTER button. 2. 3. The below message appears when recalibration is complete.
WAKE UP TIMER When the set time elapses, the ZC4001 automatically goes on standby. The sleep timer can be set to 10, 20, 30, 40, 50, 60, 70, 80 or 90 min. The Wake Up Timer outputs an audio alarm at the set time. The volume level of the alarm can be user-set. 6. 1. 2. 3. 4. 1. 6. 7. 8. 5. 6. 4. 5. 1. 2. 4. 3. . 1 . Press the ENTER button to return to the normal display. When the Wake Up Timer is turned ON, a symbol 1. Press the ENTER button. 1. 3. Press the ENTER button again.
ENGLISH SOUND EFFECT SETTING DISPLAY DIMMER SETTING CLOCK SETTING STANDBY MODE SETTING The Sound Effect mode is set as follows: Sound dynamics increase in the order of MODE1 → MODE 2 → MODE3. Setting the NIGHT MODE compresses the dynamic range . This softens loud passages such as sudden explosions, to help prevent disturbing others late at night. The brightness of the FL display can be adjusted. The display darkens in the order of OFF → LEVEL1 → LEVEL2 → LEVEL3. The time is set as follows.
ADJUSTING THE VOLUME LISTENING OVER THE PLC 1. TURNING THE POWER ON 1. 2. Check the settings of the ZR6001. Using the OSD menu system of the ZR6001, set “MULTI PLC SERVER” to “ON”. For details, see the ZR6001 User’s Guide. 1. . POWER ON/STANDBY 1. Press the VOLUME / buttons to adjust the volume. button increases Pressing the VOLUME the volume. button decreases Pressing the VOLUME the volume. Volume can be adjusted in the (Min.) 01 (Max.) 79 range.
ENGLISH HOW TO RESET THE UNIT Should the operation or display seem to be abnormal, reset the unit with the following procedure. The ZC4001 is turned on, press and hold the MUTE and STOP buttons simultaneously for 3 seconds or more. TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly? 2. Are you operating the unit properly following the user’s guide? 3.
www.marantz.com You can find your nearest authorized distributor or dealer on our website. U.S.A. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. EUROPE Marantz Europe B.V. P.O. Box 8744, 5605 LS Eindhoven, The Netherlands Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. Copyright 1992-1999 Dolby Laboratories, Inc. All rights reserved. is a registered trademark.
