Installation guide

12 13

3. The user can override the operational speed currently running via the

buttons on the top control panel after the mandatory initial two-minute

prime cycle. The override will continue until the timer removes power or

another button is pressed. The standard operation identied in

Note1canberesumedifthepoweristurnedoatthetimerand

turned back on.

Extended Functionality

The imPower motor also has the ability

to operate on high speed for only the

mandatory two-minute pump priming

cycle before changing to low speed until

power is removed. Simply change the

connection description noted above by

moving the incoming L1 to the terminal

block across from the Red lead (refer to

Figure7)toactivatethisfeature.Note

that the automatic reduced speed

function dened on Page 20 of this guide

does not apply with this feature.

Figure 7