Installation guide

24 25
24 25
5. Issue: Insucient ow from water features
Action: Assuming this issue was not pre-existing, the programmed low
speed on the imPower likely does not provide sucient ow / pressure to
provide desired water feature action. Change the speed to medium and de-
termine if this solves the issue. If it does, change the default reduced speed
to medium per the appropriate procedure outlined in this guide.
6. Issue: Pool cleaner is not working properly
Action: Assuming this issue was not pre-existing, the programmed low
speed on the imPower likely does not provide sucient ow / pressure to de-
velop the necessary suction / pressure required of the pool cleaner. Change
the speed to medium and determine if this solves the issue. If it does not,
change the speed to high.
Warranty Questions
Contact your local contractor to handle faults identied with the imPower motor.