Installation guide

4 5
4 5
Safety Considerations
The following denitions are used as safety considerations on the imPower motor
and in this manual. Please read and observe all of these safety concerns.
SAFETY
SYMBOLS
Installation and service of this motor should be attempted only by trained service
technicians familiar with the imPower Installation Guide.
This motor should be installed in accordance with accepted practices and
installation instructions, and in compliance with all national and local codes.
- 1 -
Safety Considerations
The following definitions are used as safety considerations on the
Evergreen IM motor and in this manual. Please read and observe all
of these safety concerns.
SAFETY
SYMBOLS
Installation and service of this motor should be attempted only by
trained service technicians familiar with the Evergreen instructions
and training manual.
This motor should be installed in accordance with accepted practices
and installation instructions, and in compliance with all national and
local codes.
REG7232_EvergreenIM_Reprint.indd 1 4/28/10 2:05:19 PM
- 1 -
Safety Considerations
The following definitions are used as safety considerations on the
Evergreen IM motor and in this manual. Please read and observe all
of these safety concerns.
SAFETY
SYMBOLS
Installation and service of this motor should be attempted only by
trained service technicians familiar with the Evergreen instructions
and training manual.
This motor should be installed in accordance with accepted practices
and installation instructions, and in compliance with all national and
local codes.
REG7232_EvergreenIM_Reprint.indd 1 4/28/10 2:05:19 PM
- 1 -
Safety Considerations
The following definitions are used as safety considerations on the
Evergreen IM motor and in this manual. Please read and observe all
of these safety concerns.
SAFETY
SYMBOLS
Installation and service of this motor should be attempted only by
trained service technicians familiar with the Evergreen instructions
and training manual.
This motor should be installed in accordance with accepted practices
and installation instructions, and in compliance with all national and
local codes.
REG7232_EvergreenIM_Reprint.indd 1 4/28/10 2:05:19 PM
• Disconnectpowerbeforeinstalling,servicing,orrepairingelectrical
components including motors. Observe all warning notices posted on the
existing equipment, imPower motor, and in these installation instructions.
It is also a good practice to conrm power is disconnected with a meter.
• TheimPowermotorcanbeusedtoreplaceinductionmotors.Proper
wiring selection and installation is critical to provide proper operation and
maintain the proper operation of the in-ground pool pump system
in which it is used.
• Alwayskeephandsandclothingawayfrommovingparts.
• Neverattempttomeasurethetemperatureriseofamotorbytouch.
Temperature rise must be measured by thermometer, resistance, imbedded
detector or thermocouple.
• Operationofamotoratlevelsinexcessofitsnameplateratingmayresultin
re, damage to equipment or serious injury to personnel.