Installation guide

4 5
4 5
- 1 -
Safety Considerations
The following definitions are used as safety considerations on the
Evergreen IM motor and in this manual. Please read and observe all
of these safety concerns.
SAFETY
SYMBOLS
Installation and service of this motor should be attempted only by
trained service technicians familiar with the Evergreen instructions
and training manual.
This motor should be installed in accordance with accepted practices
and installation instructions, and in compliance with all national and
local codes.
REG7232_EvergreenIM_Reprint.indd 1 4/28/10 2:05:19 PM
Safety Considerations (continued)
The following denitions are used as safety considerations on the imPower motor
and in this manual. Please read and observe all of these safety concerns.
SAFETY
SYMBOLS
- 1 -
Safety Considerations
The following definitions are used as safety considerations on the
Evergreen IM motor and in this manual. Please read and observe all
of these safety concerns.
SAFETY
SYMBOLS
Installation and service of this motor should be attempted only by
trained service technicians familiar with the Evergreen instructions
and training manual.
This motor should be installed in accordance with accepted practices
and installation instructions, and in compliance with all national and
local codes.
REG7232_EvergreenIM_Reprint.indd 1 4/28/10 2:05:19 PM
- 1 -
Safety Considerations
The following definitions are used as safety considerations on the
Evergreen IM motor and in this manual. Please read and observe all
of these safety concerns.
SAFETY
SYMBOLS
Installation and service of this motor should be attempted only by
trained service technicians familiar with the Evergreen instructions
and training manual.
This motor should be installed in accordance with accepted practices
and installation instructions, and in compliance with all national and
local codes.
REG7232_EvergreenIM_Reprint.indd 1 4/28/10 2:05:19 PM
- 1 -
Safety Considerations
The following definitions are used as safety considerations on the
Evergreen IM motor and in this manual. Please read and observe all
of these safety concerns.
SAFETY
SYMBOLS
Installation and service of this motor should be attempted only by
trained service technicians familiar with the Evergreen instructions
and training manual.
This motor should be installed in accordance with accepted practices
and installation instructions, and in compliance with all national and
local codes.
REG7232_EvergreenIM_Reprint.indd 1 4/28/10 2:05:19 PM
• Forsafety,BuyerorUsershouldprovideprotectiveguardsoverallshaft
extensionsandanymovingapparatusmountedthereon.TheUseris
responsible for checking all applicable safety codes in his area and
providingsuitableguards.Failuretodosomayresultinbodilyinjury
and/or damage to equipment.
• Improperinstallation,adjustment,alternation,service,maintenance,
or use of a motor other than for its intended application or in excess of its
nameplate rating can cause explosion, re, electrical shock, or other
conditions that may cause personal injury, death, or property damage.
Consult a qualied installer, service agency, or your distributor or branch
for information or assistance. The qualied installer or agency must use the
supplied or recommended parts when installing or servicing this product.
• Useofthewiresprovidedwithorrecommendedinthiskitisrequiredfor
proper operation of the motor. Should additional wires be needed, use
equivalent size wire gauge and rated insulation.
• Makesurethemotorisproperlysecuredandalignedbeforeoperation.