Installation guide

6 7

Introduction

The imPower motor is a permanent magnet alternating current (PMAC) electroni-

cally commutated motor (ECM), leveraging over 20 years of ECM technical and

manufacturing experience. The PMAC machine is inherently more eciency

than its induction counterpart, resulting in energy consumption savings of up to

85%. This imPower motor is designed to safely replace existing full-rated pool

lterpumpmotorsratedat3/4HP1.65SForup-ratedmotorsat1.0HP1.25SF.

This motor also features three selectable speeds either through the use of the

patent pending auto speed switch feature, top panel push buttons, external

multi-speed timers, or through external automation controls.

RB003

ModelNumber 5SME29DFT001

Voltage: 208-230V (±10%)

Flange: Square

HP: 1.0

ServiceFactor: 1.25

High Speed 3450 RPM

Medium Speed 2600 RPM

Low Speed: 1725 RPM

Temp Rating: -40C to +55C

Weight: 11 lbs

RB053

ModelNumber 5SME29DFT002

Voltage: 208-230V (±10%)

Flange: Round/C-Face

HP: 1.0

ServiceFactor: 1.0

High Speed 3450 RPM

Medium Speed 2600 RPM

Low Speed: 1725 RPM

Temp Rating: -40C to +55C

Weight 11 lbs

The installation manual enables a technician, certied by their local/state agency/

board, to install, service, repair, and maintain the imPower motor.