Tire Manual
Contents Safety Information........................................3 Customer Service..........................................3 How to Measure a Tire..................................4 Installation Instructions (Wheelbarrow)....5 Installation Instructions (Hand Truck).......6 Bearing Replacement.................................. 7 Inflation Instructions (Pneumatic Tire)......
1. Safety Information Use gloves to install ! Wear safety glasses Not for highway use. When using an air filled/pneumatic tire: Max Inflation 30psi. Manual pump only. Do not use air compressor. Customer Service If you have any questions regarding this product, please don’t hesitate to contact us. Toll Free 877-425-1640 253-893-7021 Online Email: sales@marathonind.com Website: www.marathonind.
2.
3. Installation Instructions (Wheelbarrow) Note: These installation instructions apply for installation on most standard wheelbarrows. For installation on other equipment, please see original equipment manufacturer’s manual. You will need: Crescent Wrench, New Wheelbarrow Tire, Gloves and Eye Protection. 1 Step One: Put on your gloves and eye protective-wear. Use your crescent wrench to unscrew the axle brackets that attach the axle to the wheelbarrow. Remove brackets on both sides (Fig. 1).
4. Installation Instructions (Hand Truck) Note: These installation instructions apply for installation on most standard hand trucks. For installation on other equipment, please see original equipment manufacturer’s manual. You will need: Pliers, Gloves, Eye Protection, New Marathon Tire. 1 3 Step One: Put on your gloves and eye protective-wear. Put the hand truck on the ground or on a solid surface with the wheels facing up.
5. Bearing Replacement You will need: Hammer, Screwdriver, Block of Wood, Replacement Bearings, Gloves and Eye Protection. 1 3 Step One: Prop the tire up to allow room for the bearings to be removed from the hub. For example, you may use a bucket. Step Three: Hit the top of the screwdriver with a hammer until the bearing pops out into the bucket below (Fig. 1). 2 4 6 Fig.
6. Inflation Instructions (Pneumatic Tire) Safety Warning: Inflation over 30PSI may cause serious injury / explosion. Never use air compressor. Inflate with manual pump only. Max inflation 30 PSI. Never overfill your tire. You will need: Manual Pump, Gloves and Eye Protection. 1 3 Step One: Put on your gloves and eye protective-wear. Remove any weight from the tire. Do not fill the tire when it’s on the wheelbarrow.
Toll Free 877-425-1640 253-893-7021 Email: sales@marathonind.com Website: www.marathonind.
