System information

Endurance Manager 4-25
Failed Both physical disks are not usable
because they are:
• Failed, Disabled, Offline, or
Unknown while the FTvirtual
Server was active.
or
• Failed while the FTvirtual Server
was shut down.
For non-mirrored disks:
The physical member disk is not
usable because it is Failed, Disabled,
Offline, or Unknown while the
FTvirtual Server was active.
The physical member disk is not
usable because it is Failed while the
FTvirtual Server was shut down.
The physical disk has experienced a
failure. It is no longer usable and
requires repair.
For non-mirrored disks:
The physical disk has experienced a
failure. It is no longer usable and
requires repair.
Good Both physical disks are usable.
For non-mirrored disks:
The FTvirtual Server disk is fully
operational.
The physical disk is usable and is a
member of an up-to-date mirror set.
For non-mirrored disks:
The disk is usable.
Good/Copy Source The physical disk is in use and is the
source of an ongoing mirror copy.
Offline Both physical disks are not usable
because they are Disabled, Offline, or
Unknown while the FTvirtual Server
was shut down.
For non-mirrored disks:
The physical member disk is not
usable because it is Offline or
Unknown while the FTvirtual Server
was shut down.
The physical disk is not available for
use. This is because the CoServer to
which it is attached is in a Failed,
Disabled, or Offline state.
Table 4-12 Disk States (Continued)
State
FTvirtual Server Disk
Description
CoServer Disk Description