Magnum Router User's Guide

Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-7
WAN Config Button
Click the W
AN Config button on the Magnum Router Manager main screen, press ALT-W, or
select WAN Configuration from the S
ettings menu to access the WAN Configuration screen.
In a frame relay environment, end-points are connected together via the use of PVC’s
(Permanent Virtual Circuits). The WAN Configuration screen is where these PVC connections
are created in the Magnum Router.
Add a NEW WAN entry
into the configuration
Delete a WAN entry
from the configuration
Save changes to the
Magnum Router
Manager
Exit this screen and
return to the Main
Screen
Add an IP address to the
WAN port of the
Magnum Router
Add IP routing
information for the W AN
Select the Frame Relay
INPUT Port
Select the Frame Relay
OUTPUT Port
DLCI number fields
The Commited
Information Rate of the
Frame Relay Circuit
Whether to treat this
connection a as
multiplexed DLCI
(Virtual) or as a pass-
thru DLCI
Add documentation
notes for each entry
Figure 17 - WAN Configuration Screen