User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 9: Sample Configurations
___________________________________________________________________
9-10
Sample 2 - Point to Point Public Frame Relay Network
IP Address: 192.168.1.2/24
IP Address: 192.168.1.1/24
IP Address: 10.1.100.250/24
CSU/DSU
Magnum/Marathon A
Ethernet port
Network: 10.1.100.0/24
CSU/DSU
Magnum/Marathon B
Ethernet port
Network: 172.16.1.0/24
IP Address: 172.16.1.250/24
Public Frame Relay
DLCI 16
PVC
WAN
Network
192.168.1.0/24
DLCI 17
A1 to M1
cable
Although this sample is very similar to SAMPLE 1, there is one important difference. This time
the carrier is supplying the clocking and Frame Relay information. This means that the WAN1
ports on both Magnum Router’s will need to be set-up as a Frame Relay USER (FR_Public)
port.
Configuration File used in this example:
Public Point-to-point FRAME-A.CF2
Public Point-to-point FRAME-B.CF2