User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 9: Sample Configurations
___________________________________________________________________
9-16
Sample 3 - Multi-Point Public Frame-Relay Network
IP Address: 192.168.1.2/24
IP Address: 192.168.1.1/24
IP Address: 10.1.100.250/24
CSU/DSU
Magnum/Marathon A
Ethernet port
Network: 10.1.100.0/24
CSU/DSU
Magnum/Marathon B
Ethernet port
Network: 172.16.1.0/24
IP Address: 172.16.1.250/24
Public Frame Relay
DLCI 16
PVC
WAN
Network
192.168.1.0/24
DLCI 17
A1 to M1
cable
IP Address: 192.168.2.2/24
Network: 172.17.1.0/24
Magnum/Marathon C
IP Address: 172.17.1.250/24
Ethernet port
DLCI 18
CSU/DSU
This example is basically the same as the second example, except that a third Magnum Router
is being added. Pay close attention to the WAN IP Route Map screens, WAN Configuration
screens, and Ethernet Configuration Screens. In this example, multiple IP addresses are used
on the WAN Ports, and multiple Virtual DLCI’s are utilized.
Configuration Files used in this example
Multi-Point Public FRAME-A.CF2
Multi-Point Public FRAME-B.CF2
Multi-Point Public FRAME-C.CF2