User`s guide

Chapter 12: Marathon Port Configuration
___________________________________________________________________
12-1
Chapter 12: Marathon Port Configuration
Frame Relay Port Configuration Example
NOTE: Bolded text items are fields that either need to be changed or are recommended
that they be changed.
PORT CONFIGURATION [FRAME RELAY LINK]:
1. ASYNC
2. SYNC
3. INTERCONNECT LINK
4. SECONDARY INTERCONNECT LINK
5. FRAME RELAY LINK
FRAME RELAY LINK PARAMETERS [LEFT/ A01]
1. CLOCK SPEED [64000]
2. PORT CLOCKING [TX-EXTERNAL/RX-EXTERNAL]
3. MAXIMUM FRAME SIZE [1500]
4. NETWORK ADDRESS
5. LOCAL MANAGEMENT PROTOCOL [ANNEX D]
(LEAVE ALL THESE SETTINGS ALONE)
LOCAL MANAGEMENT PROTOCOL PARAMETERS [LEFT/ A01]
1. FULL STATUS POLLING COUNTER (N391) [ 6]
2. ERROR THRESHOLD (N392) [ 3]
3. MONITORED EVENTS COUNT (N393) [ 4]
4. LINK INTEGRITY VERIFICATION TIMER (T391) [10]
5. POLLING VERIFICATION TIMER (T392) [15]
6. ACCESS LINK MODE [USER]
DLCI PARAMETERS [A01.0053]
1. COMMITTED BURST SIZE FORWARD (BC.FWD) [ 0]
2. COMMITTED BURST SIZE BACKWARD (BC.BWD) [ 0]
3. EXCESS BURST SIZE FORWARD (BE.FWD) [ 0]
4. EXCESS BURST SIZE BACKWARD (BE.BWD) [ 0]
5. CIR FORWARD (CIR.FWD) (BPS) [ 128000]
6. CIR BACKWARD (CIR.BWD) (BPS) [ 128000]
7. CONGESTION CONTROL [ENABLE]