User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 5: Magnum Router Manager Installation
___________________________________________________________________
5-2
After the pre-installation screen has completed any checking, the main installation screen will be
displayed:
Figure 2 - Setup Confirmation Screen
Click on OK to continue the installation, or click Ex
it Setup to abort the installation.
If OK was clicked, the select directory/perform installation screen will be displayed.
Figure 3 - Setup Install and Directory Screen
The default installation directory is C:\Program Files\Magnum Router Manager. If the program
needs to be installed on another hard drive, or another directory, click on Change Directory and
select the appropriate drive and directory location to install the program.