User`s guide

Chapter 5: Magnum Router Manager Installation
___________________________________________________________________
5-5
First-Time Startup
When the Magnum Router Manager first starts, it looks for setup information. If this is the first
time that you’re running the manager, the communication port settings screen will appear.
Save any configuration
changes to the Magnum
Router Manager
Exit this screen and
return to the Main
Screen
Enter Special Modem
Commands
Select the
communications port to
use for connection to the
Magnum Router
Figure 7 - Communication Port Setup Screen
Select the PC’s communications port that is to be used to connect to the Magnum Router by
clicking on the Comm Port dropdown box. When you’ve completed that step, click on Sav
e to
save this setting and then click on Ex
it to start the manager and get to the login screen.
If for some reason another communications port needs to be selected, clicking on the Settings
on the Main Screen menu bar, then select Communications Settings from the dropdown
menu. From the Comm Port Settings window select the appropriate communications port.
The Magnum Router console port baud rate is set at 9600bps from the factory and cannot be
changed.
This is the serial setup for communications from the PC to the Magnum Router console port and
does not have anything to do with a modem dial-up environment.
Once the initial setup has completed, the login screen will be displayed.