User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 6: Logging Onto a Magnum Router
___________________________________________________________________
6-6
Telnet
This allows Ethernet access to the Magnum Router. Selecting this option will show an
additional section to the main login screen.
Bypass the LOGIN
Process and go directly
to the Magnum Router
Manager Main Screen
Connect to a Magnum
Router using the
selected LOGIN
METHOD
Start the TEXT ONLY
terminal program
Enter EITHER the IP
address of the Magnum
Router, OR select a
name from the dropdown
box
Figure 9 - Telnet Login Screen
Login by typing in the IP address of the Ethernet port of the Magnum Router, or select a Router
Name and the IP address will be automatically filled in.
Router Names are covered in more detail in chapter 7.
The default IP address of the 10/100 Base-T E1 port is 10.1.100.250 with a subnet
mask of 255.255.255.0 and the WAN IP address is 192.168.100.250 with a subnet o
f
255.255.255.0