User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-3
New Config Button
This button can be accessed by pressing ALT-N, or selecting New Configuration from the
Configuration menu.
Select this button to create an empty configuration in the Magnum Router Manager
customization.
Selecting this item will cause the Set Mangum Name screen to appear
Figure 15 - Set Magnum Name Screen
This sets the name of the Magnum Router. It is for informational purposes only and IS NOT
required data. However, New Config must be selected to create an empty configuration in the
Magnum Router Manager.
After entering the name, click Sav
e or press ALT-V to save the name. When completed, click
on the Ex
it, or press ALT-X to return to the Magnum Manager main screen.