User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-10
Master WAN-IP Address
The Master WAN-IP address screen is only available via the WAN Configuration screen.
The Magnum Router is a Frame Relay switch and IP router combined into a single product. The
Master WAN-IP address screen allows users to configure a single WAN interface or multiple
WAN sub-interfaces by mapping and assigning a unique IP network number to specific DLCI’s.
Add a NEW WAN entry
into the configuration
Delete a WAN entry
from the configuration
Save any changes to the
Magnum Router
Manager
Exit this screen to the
Main Screen
IP Address to assign to
the WAN Port
Subnet Mask of the IP
Address
DLCI Number assigned
to the IP address
Add documentation
notes for each entry
Figure 18 - Master WAN IP Address Screen
It is possible to have 1 primary and up to 253 additional IP addresses in the Maste
r
WAN-IP table.