User`s guide
Table Of Contents
- Introduction
- Magnum Router Features
- Pre-Installation
- Installing the Hardware
- Magnum Router Manager Installation
- Logging Onto a Magnum Router
- Magnum Router GUI Manager
- Magnum Router Manager Main Screen
- Toolbar Buttons
- New Config Button
- Port Config Button
- WAN Config Button
- Other WAN Config Buttons
- Master WAN-IP Address
- WAN-IP Route Map
- Advanced Routing
- RIP Version 1 Routing
- Ethernet Config Button
- Micro-Band Voice Over IP
- Save Configuration
- Send Configuration
- Reboot the Magnum Router
- Menu Bar
- Configuration Menu (ALT-C)
- Settings Menu (ALT-S)
- System Menu (ALT-Y)
- Statistics Menu (ALT-T)
- Help Menu Item (ALT-H)
- Exit Menu Item (ALT-X)
- Toolbar Buttons
- Magnum Router Manager Main Screen
- Magnum Router Specialized Functions
- Sample Configurations
- Magnum Router Troubleshooting
- Magnum Router Cable Specifications
- Marathon Port Configuration
- Configuration Worksheets
Chapter 7: Magnum Router GUI Manager
___________________________________________________________________
7-14
Advanced Routing
This function is only available via the WAN-IP Route Map screen.
The Advanced Routing section of the Magnum Router Manager allows for additional static
routes to be entered. Such routes may include a default route to another router for Internet
access.
Click on the Advanced Routing button of the WAN IP Route Map screen, or press ALT-A to
display the Advanced Routing screen.
Add a NEW WAN entry
into the configuration
Delete a WAN entry
from the configuration
Save changes to the
Magnum Router
Manager
Exit this screen to the
Main Screen
Enable or Disable
Dynamic Routing (RIP
Version 1)
Address of the "Next
Hop" router
Add documentation
notes for each entry
Destination IP
NETWORK address
and subnet mask of the
remote site